Send me your dumped with programmer BIOS from 3368 system, I will make it the ME FW version you want, then you program it back.
If it fails still, then there is some setting/bug carried over during the ME Settings transfer/downgrade, and we'll have to find dump from this exact 3368 system, which will be a MAJOR pain, since both use same BIOS but may have very different ME configurations.
Before that, we can test ME directly swapped from working 3367 dump too, you can dump it with FPT, send to me, I'll recompile with your 3368 BIOS then you program it back

To dump configured ME FW from 3367, download the v8 ME System tools from section C.2 this thread, then do as outlined below (or, you can dump it's chip with programmer if you want)
Intel Management Engine: Drivers, Firmware & System Tools

Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder.
Select that Win folder, hold shift and press right click, choose open command window here (Not power shell).
At the command prompt type the following command and send me the created file >> FPTw.exe -me -d me.bin

If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...creators-update
https://www.windowscentral.com/add-open-...menu-windows-10
https://www.laptopmag.com/articles/open-...ator-privileges

Or here is simply registry edit that adds "Open command window here as Administrator" to the right click menu
Double-click to install, reboot after install may be required
http://s000.tinyupload.com/index.php?fil...134606820377175

You can give me clear ME?

No, I can do as I mentioned above. Update (Downgrade ME version to what you think you need) and transfer ME Settings for you. But before that, I will give you BIOS to try with the direct ME FW swap as I mentioned above.
Clear ME is a generic term that should not be used by anyway, it could mean any number of things to different people.

You mean, me need update ME on the 3367? - I don't need it.
3368 does not want to downgrade from under OS Windows.

No, you are confusing what I meant. Please do as mentioned in post #16. Send me programmer dump of 3367 and 3368 if that is easier for you
Yes, you cannot downgrade ME using ME FW update tool, only FPT if FD unlocked, or by programmer (by either unlock FD first and program in, or just program in BIOS with FD unlocked and ME how you want it).

Why not just fix bios dump 3368? without 3367.

@Diep4 - Do you want my help or not? As mentioned, I need you to send me dump of 3367 because I will do two things with that systems ME FW (To the 3368 BIOS), as I said at post #16.
I cannot use 3368 dump as ME Source to fix/downgrade the ME, because you said it's bugged, so we don't want the bugged ME FW settings to carry over into anything I do in the new ME FW you want.
We can try that, but it may be a waste of both our times, and waste of one of the possible times you can use your programmer clip before it starts wearing out (the cheap clips only last so many uses then they stop being able to grab chip)

I fixed it myself.

@Diep4 - glad to hear you were able to fix it finally! Thanks for update, I was waiting and wondering if you were going to send me the dumps or not

[quote=Lost_N_BIOS|I was waiting and wondering if you were going to send me the dumps or not [/quote]

Zitat von Lost_N_BIOS im Beitrag #20

---

Send me programmer dump of 3367 and 3368 if that is easier for you

---

@Diep4 - Nobody ever told you to solder or desolder anything, I assumed you had $3 SOIC8 test clip. you are the one that wanted stuff from 3367 in 3368, thus that is only safe way since you said 3367 messed up (so it can't be used as ME Settings transfer source)
You could have dumped 3367 with software too, if you would have said soldering I would have stopped you right there and went software routes, especially if you said you are not comfortable using a solder iron multiple times
I'd never do that anyway, SOIC8 clip is $3, I would have said to order and wait, or helped you software ways

You are very argumentative, maybe it's translation issues? I was only trying to help you, with what you requested. You do not need to break anything.
And no, I did not want to copy anything from 3367, only to use it's ME FW as a known good base to correct 3368 ME FW using Intel FITc..... Any fool knows what, what you assumed??? Your assumption was wrong.

Sorry for anything you misunderstood here by me, I think we have some translation issues, I thought you were getting mad and not understanding me before, now I realize this must be true to how how you said things today and some of the wording I can see is translated etc.
Very sorry for any misunderstandings!

Clear official ME 8.1.0.1265.