Dang, sorry about that @linklp - I've got to quit using that host, they say keep files for as long as they can but often only a day or two later they are done. Slacker file host!!
Here is two new mirrors (no joining or credit card needed at sendspace, right click the download button and save as or open in new tab, ads/popups confuse people there sometimes)
https://www.sendspace.com/file/c34c8v
http://www.filedropper.com/h97-d3h-f5-mod-306c3-uc19

What does partition magic have to do with any of this? H97D3HM2-7M2.F5 contains 7 (one we thought we wanted, but know it does not work now since you tested this one by itself), and also 12, 19
Since 12 loaded there, did you test with the Xeon CPU? If yes, and it loaded, problem solved, you can use V12 and possibly up to v21

You lost me there, same with VMware, software microcodes etc, No, none of that is needed or suggested (Actual BIOS only, you're having a CPU issue not at windows/OS so we need at very starting level = BIOS level)

@Lost_N_BIOS
Its still 22 in Windows. (But where does the 22 Microcode come from? where is it/ how is it stored?)
I checked in linux , its 19 there. So yeah...
But i had some difficulties, first it blackscreened, then it just worked for one boot, then it worked.

(I talked about partition magic cause thats the linux i used to check the microcode.)
And yeah, i did the test with my xeon 1231v3, i dont have any other cpu for this mobo.

Maybe we need to try it with F4? Maybe there is a reason this german company used the F4 one?

Good, Linux is showing 19, that's what BIOS is using, the 22 must be loaded by windows update. Thanks for explaining about partition magic, I didn't think of a boot disk

Why F4? You said it's working now correct "Then it worked"? I assume/think they probably used F4 because that was the latest BIOS at that time, but if it's not working on F5 then yes we can try F4 next, but sounds like you have it working?

I meant that the flash was bad or something like that, because i did reflash it 2 times. And then "it worked". (Sorry that im explaining myself very badly)

And how do i need to configure it? Turn on/off Turbo? And what else would i need to turn off/turn on?

So if it's working now, then all is solved. You have to disable Non-K OC, leave Turbo enabled but all auto/max, see post 231 as it's going to be trial and error the info I found was not for this brand.
Bad flash? How are you flashing? Please do not use @BIOS, only Qflash or DOS

Ok i will try stuff after coming home.

I flashed before with FPT, first stock, then mod. But i found out that it doesnt work and did stock with FPT and then mod with qflash.
This worked.

I need to use fpt for stock bios because the backup bios is f7.

Change backup BIOS to match main BIOS, this is always suggested/best practice - ALT+F10 at startup where you normally press Del to enter BOIS

hi lost n bios I have installed the bios that you give me and the SG option wont appears in video configuration option thank you

@juanete - sorry about that, looks like change was not saved? Here, try again this BIOS, I double checked and both changes saved now (Full menu access and advanced menu access)
http://www.filedropper.com/fullmenu2
https://www.sendspace.com/file/rcb3xt

ok I download the bios full 2 i tried but is not working doesnt show up SG in video configuration what could be?

Let me see all your graphic options, several images is fine, put in zip and upload to file host.
Sometimes other setting might need enabled before SG is option, for example, there needs to be two actual graphic options enabled in other areas probably, and needs to be two physical GFX devices too (Are you sure there is NVIDIA card, it's in device manager or no?)

yes im sure ,the NVidia is in the device manager and I use it ,I will send you the fotos with bios https://www.sendspace.com/file/35lvnq thank you

Thanks for the images. I see one setting I can see in setup, but not shown in that section in your images, that may apply. In Advanced, PCI Express Graphics "Always Enable PEG" - set to disabled by default. That is why I asked if Nvidia show at all or not.
See image here, I can set this to enabled, maybe that will allow SG to show for you? I don't know how to make the setting visible for you, sorry, only can change it's default value.


Also, another setting you do not see in Advanced, Internal Graphics device. Internal Graphic Device (Auto is default, can be set enable/disable) - can you use the internal graphics too (Load Intel Driver)? If yes, auto is enabling it then, so both Nvidia and iGPU enabled.
As for the Primary Display option, which offers the SG Setting, it's missing in your images too - Advanced, Video Configuration Page, it would be third entry or single setting right there. I can set SG if you want, if it fails clear CMOS or you may need to recover to other BIOS via recovery method or flash programmer.


I forgot to mention previously, you mentioned standard VGA Driver installed, you have to install the Intel driver before that would change. Show me device manager, display/graphic adapters or same in AIDA64 or HWInfo64 if you have, so we can see if both show or not.

Do you want me to make BIOS with SG enabled instead of Auto, and enable IGD instead of auto there too?

ok do this enable in bios, but later If I want to disable the intel gpu how can I disable?if I uninstall the driver intel sould be disabled?i tried many times to install the intel driver but give me an error intel graphics driver does not meet minimum requirements and in aida its shows only NVidia graphic card

To disable anything I enable that you can't see, you would have to flash back to other mod BIOS I sent you before that next enabled edit. No, uninstall Intel driver will only make windows driver (Standard VGA) be used instead.
Maybe iGD is disabled now via Auto's choice, but only shows up still due to being part of the CPU, since you cannot install it's driver? Maybe best to set that to enabled as first test, instead of Auto, to then see if you can install Intel driver. You have to be sure you have exact correct driver with Intel too.