Hi all,I have managed to mod and successfuly flash the modded bios through FTPW .However even after changing the access to user one of the advanced tab wont show up ,only the default advanced tab shows up.IT seems there is nothing I can do inside AMIBCP further.So someone please help to unlock both of the advanced tabs.

I have attached my bios dump which I took through FTPW.

Is the attached dump your original FPT dump BEFORE you attempted to modify anything? If yes, OK, thanks. If not, please attach your original FPT dump instead.

Thanks for the quick reply

Instead of uploading the stock bios ,I have uploaded the modded one .So now I have flashed the stock bios through asus ez method and then made a dump through FTPW.

PLease find the stock bios dump in the attachment

I want stock BIOS FPT dump. You've above post contradicts itself, please clarify
This, contradicts itself, and now I don't know what BIOS is what >> Instead of uploading the stock bios ,I have uploaded the modded one .So now I have flashed the stock bios through asus ez method and then made a dump through FTPW.

I need you to flash stock BIOS via EZ Flash as mentioned, and then make new FPT Dump.
If you had to unlock BIOS or SMI lock last time before you could FPT Flash your mod BIOS, do that this time too, before you make the new FPT Dump, that way it will be already disabled in the base BIOS I use and you will be all set to flash new mod BIOS again.

TO avoid confusion ,Once again I am attaching the pure bios FPT dump ( without any mods) with this message .

@kiranfdo - Thanks! Once I am done, anything still missing you will be able to make visible by AMIBCP edit >> Access Level >> Supervisor
Please send me archived package of one image of each main BIOS page/section (like main, advanced, boot, exit etc) You can probably screenshot to USB via F12
Sorry, I should have asked for those earlier!

bios pages attachment

Quick test needed, which of these BIOS do you have new "Save & Exit", only one or both? If only one BIOS has new, which one? If both = No Save & Exit now, it's OK, valid test result. This BIOS is a little tricky
1. AMITO
2. AMITS

http://s000.tinyupload.com/index.php?fil...220574698923048

Both bios has the new save and exit tab and both do not have the old save and exit tab.

yes the bios seems to be tricky because previously during modding , I was searching for the so called"magic string",but I could not find inside the setup image.

Great, thanks for quick test and report back. I may not need you to test anything else, for now at least, maybe later if something else missing still once full unlock is done.
But I think if anything missing after I do that you can just change access level to super, unless something suppressed in setup, then you or I would have to unsuppress it, but that's not used too much

Magic string mainly used in old BIOS, Aptio IV usually, rare to see it on Aptio V but sometimes it's used. This mod done on AMITSE Module, is main target.
I thought it was tricky because usually there is a short list of two byte ID's for all menus either block or allow, but no short list like that here so I thought maybe I missed it, that was why I wanted quick test before doing anything else.

I'll show show you how to do and give you my notes once I'm done, so you can learn how to do it for this system and be ready for next BIOS update

Glad to hear that everything is going on track.Fingers crossed for the update ,and eagerly waiting for the mod guide .
Thanks man.

@kiranfdo - Next quick test, then I will do rest of unlock. Please check Advanced page, do you see new settings Power Off Energy Saving + ASUS USB Charger+ in battery mode
Let me know if you see that in only one of these, or both, and if only one which one.
1. SDO
2. SDSet
http://s000.tinyupload.com/index.php?fil...515457347999747

I can see both settings in both bios

@kiranfdo - Thanks for testing and being patient Here is full unlocked BIOS, let me know if anything still missing inside visible menus compared to what you see in AMIBCP (or you can further edit to enable, just change missing item access level to Super)
If any "Submenu" missing inside a menu you can see, all you need to do is change access level to super at the root folder where that sub is referenced, you don't need to change all access levels within it for each setting. If you don't get what I mean there, let me know, I will show you image example.
http://s000.tinyupload.com/index.php?fil...275143845014283

New menus should be >> Main x2, Advanced x2 , Boot x2 + Chipset + New Save & Exit only. Please confirm that is all correct after you flash, or send me an image for later reference, thanks

In this package I include my notes, and the before/after files, in order to understand how to use what's in my notes, please see the "Advanced" section of this guide, at the bottom in spoiler, that gives general explanation on how to do these AMITSE menu edits.
That method outlined in the guide does not directly apply to your BIOS, as your BIOS it's a little different (Less involved), but you will see the general how-to once you read that guide and see my notes before/after edit info.
OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files

Thanks a lot the every tab is visible ,the only problem is lack of manual fan control.The active trip 0 and trip 1 setting inside the bios doesnt work and none of the fan control softwares detect my fan rpm .So do you is there anyway I can get manual fan control?The laptop cpu heats upto 95 degree only then the fans ramp upto full speed.