@anikiamin:
Welcome to the Win-RAID Forum!
The only driver, which has to be integrated into the OS Image or loaded at the beginning of the OS installation, is the storage driver, which is required for the OS Setup to detect the target system drive. All other drivers can be installed after having completed the OS installation. The BIOS itself may have only to be customized, if you want to get the OS installed onto a RAID array or onto an NVMe SSD.

To be able to answer your question I need the following information:
1. Which is the manufacturer and which model is your system disk drive (where the OS and the boot sector are installed)?
2. Which are the HardwareIDs of the "IDE ATA/ATAPI Controller" resp. "Storage Controller", which manages your disk drive?
To find out the latter information, you have to boot into your currently running OS, run the Device Manager and expand the sections "IDE ATA/ATAPI Controllers" and - if applicable - "Storage Controllers". Then do a right-click onto all listed devices with the word "Controller" within their names and choose the options "Properties" > "Details" > "Property" > "HardwareIDs".

Regards
Dieter (alias Fernando)

@anikiamin:
As long as you haven't set the on-board SATA Controller to "RAID" mode, there is no need to modify or update the BIOS. The related BIOS modules will not be used.