Zitat von StormRaider im Beitrag #14

---

Hello, just saw your post.

Look at your motherboard there shoulld be somewhere written version 1.0 or 1.1 if it is rev 1.0 get the bios from.lost n bios in this thread.

If you motherboard is rev 1.1 this one
Bios Driver Modules Versions Question, For GA-X79-UD3 Rev1.1 (F20 modded)

---

Regarding you reboots to stock, the problem might be that i have the memory to default at 2400Mhz by xpm profile saved in the BIOS so your sticks might not be up to that and when rebooting goes back to stock settings. In bios revert the memory setting back to SPD for you sticks, save the profile anew and all will be fine for sure. Other than that i believe BIOS for GA-X79-UD3 revisions 1.1 and 1.0 are identical (gigabyte site offers the same files in its site for both revisions, maybe a design difference somewhere else). It was most probably my default memory setting that reverted the bios to stock and caused the reboots.

No!

(The Bios you provided has Option that were not there by default.)

Your Bios is overclocking my 3930k to 3500ghz by itself?

It should default to 3200ghz this was with older bioses the case.

I load optimized default checked everything is set to auto, reverted everything back to default.

It still gives me reboot.loops everytime i turn the pc on.

I even gave it another shot just now just flashed it the same behavior is happening again.

The bios lostnbios made for me it running fine/perfect.

@Lost_N_BIOS would it be possible to upload the modded 1.0 file? For some reason the current file doesn't seem to download (at least for me). Many thanks.

@Kaizen0861 - I assume you mean post #9? If yes, that original tinyupload link still works, you may need to disable proxy to download from that site.
Anyway, I added a few more mirrors to post #9

I have the same motherboard and have just purchased a nvme and a PCI card. I delighted to have stumbled upon this post! I will attempt this tonight and let you know how I get on! Is there any tricks to updating the bios? This will be the first time I have done it.

Thanks!

@Jamtil - Put BIOS on FAT32 formatted USB Stick, boot to BIOS and hit F8 to enter Qflash, navigate to BIOS and flash it
Then see step #4 of the "This is what you should do" section for how to do a clean install to NVME - [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS

@Lost_N_BIOS Thanks! I'm getting an error that my qflash is outdated. I can't even get the oldest gigabyte one to flash. What's the best work around for this?

Update.. managed to install with dos on a mem stick, amazing how much faster this is! Thanks to your 1.0 bios!!

@Jamtil - This happens when you are on old BIOS and the new one contains a newer Qflash module.
Sorry, I didn't expect you were on that old of a BIOS, or I would have told you that you need to update to latest BIOS with DOS first (or @BIOS), then Qflash the BIOS I made.
Glad you figured it out, and thank for posting back in case it helps someone later Also, great to hear new BIOS is working much better for you

@ Lost _N_Bios, None of the links are valid.
Could you upload it again & give us the new link.
thank you in advance

The result clicking your links:

Sorry, the file you requested is not available.
Possible reasons include:

- File date limit has expired.
- File was not successfully uploaded.

It is not possible to restore the file. Please contact the uploader and ask them to upload the file again.


The site ahead contains harmful programs
Attackers on s000.tinyupload.com might attempt to trick you into installing programs that harm your browsing experience (for example, by changing your homepage or showing extra ads on sites you visit). Learn more
-----------------------------------

@Lost_N_Bios: I've already succeed in downloading it via tinyurl.
thank you.

@Zhuge Liang - Who browses the internet without ad-blockers enabled these days? Tinyupload does not have any ads when I am there, it's best free file host I know, easy to up/down from, no waits, and keeps files alive the longest.
If you know of another similar free site, please let me know.

BIOS link at post #9 is valid, tinyupload link.

@ ALL >> Rev 1.0 & 1.1 use exact same BIOS, I just compared F20 via hex = 100% hex match, despite the different zip package download names.

Hey,
I´m Kinda Love to your Idea and Awesome that there Guys who build an Custom Bios for that
did you also run your OS on that PCI NVME ?
or is it "just" an additional Drive?

Best regards
Nerdbeere

@Nerdbeere - Users here want NVME mod so they can boot their OS from NVME. If you just want to use NVME as spare/secondary non-OS drive, you do not need NVME mod

thank you to Lost_N_BIOS, I've succesfully updated BIOS and my Samsung 970EVO has recognized as PATA.
But unfortunately when I installed windows 10 Pro:
although Win10Pro recognize the NVME, but Windows stated that windows couldn't be installed on that drive.

Hi @Lost_N_BIOS , tried the link in post #9 but it seeems to be dead. Would you be so kind in reupping the file? Thanks!