@hyppo dump me all your RAM settings plz buddy :)

oh btw the way use real time memory and in XTU you got this new tab :

https://easyupload.io/u0cl73

You are right Hyppo i manage 2993 mhz :)

i saw your XMP screenshots page one

But i need the the ratio ? 11 is for 2993 for 3200 which ratio PLZ ?

nice gains : 2666 to 2997 mhz DDR4

There is also another setting for divider so you can set also 3000, 3100 etc

Zitat von Hyppo im Beitrag #123

---

There is also another setting for divider so you can set also 3000, 3100 etc

---

@mikolaj612 - only needed the 100.00.16.08 version used, so be sure you use that version with the file below.
After you program this back in, reboot and make a new FPT BIOS region dump, then send me that for edit
Here is your edited vars, flash it back with this command >> H2OUVE.exe -sv varsmod.txt
https://ufile.io/2qt3vhdi

Some values were failed to write is that correct?

Here's file you required :

https://www37.zippyshare.com/v/vQ5uoB4c/file.html

@mikolaj612 - Yes, that is correct, see here for assurance (post #100) - [Help] Unlock advanced menu on 2019 Acer Predator Helios 300 PH315-52 (7)
Then reboot

Ok, so mod those files best you could and I will flash them next ;)
If everything will be ok - I'll reply back to you.

@mikolaj612 - So, your edit at #126 is FPT dump after reboot from flashing vars back in, correct? If not, do that now, reboot, and then make new FPT Dump and upload for me.
If it is that, please confirm before I download it, thanks

Yes, that DUMP was made after flashing your file and I rebooted my PC then ;)
So it should be proper file.

mikolaj612 - here is your mod BIOS, flash via >> FPTw.exe -bios -f biosregm.bin
https://ufile.io/lqb6qqj9

I assume that I need to restore my factory default bios setting after flashing this one ;) ?

------------------
Everything is working fine - I've got two advanced tabs, one is factory default, second came from unlock.
I assume those options are fully unlocked and there is nothing left to unlock at this point?

@mikolaj612 - Thanks for quick test and report back! Yes, after any BIOS flash, you should always load optimal defaults, then reboot back to BIOS, then make all other changes you need before booting to OS

Not sure if there is anything else to unlock, no one ever asked me to look. I doubt anything useful in other areas
Yes, everything in the new menu is unlocked, once you enable overclocking option you will see more settings too I believe (unless that's enabled by default, can't remember if I switched it for you or not)

I forgot warning to you, and maybe some others previously too!

*** Warning to ALL ***
With unlock menu, DO NOT try to enable or disable this or that graphics controller, or you WILL end up with black screen (no display output)
This will leave you unable to enter or reset BIOS unless you are ready in advance for a blind flash or have a flash programmer in hand.
You can change graphics related settings, such as speed, or DVMT size etc, just don't try to disable or switch controllers etc.

So good so far : Hi lost gaining points every day thanks to you buddy

@Hyppo

3.2 ghz cas 20 isnt better than 3ghz cas 17 (even tighter latencies than my stock default @ 2400) i will stick to that bandwith is huge and tighter latencies are better for gaming and cracking !

Here is the difference between DDR4-2666 CL19 and DDR4-3200 CL20





By Aida memory benchmark, it is 15% gain in bandwitch, 38k vs almost 45k in read

But regarding real benefit probably you won't notice any difference in most of apps maybe in some specific only

I also remember that 3000 CL17 had numbers similar to 3200 CL20