@Bunny98 - These are the only two vBIOS in your BIOS, so if you do have 2060 card and can see it with GPU-z, then your card's vBIOS is on card and you can dump vBIOS w/ GPU-z, thus you can flash another brand/variant into there
GP108 E2902 SKU 100 - Version 86.08.2D.00.B7 - DevID 1D11 = GP108M [GeForce MX230]
GP108 E2902 SKU 100 - Version 86.08.2D.00.B8 - DevID 1D13 = GP108M [GeForce MX250]

But doing that is kinda risky, and best to only do if you have programmer and backup made FIRST, so you can recover if needed

Then, you would be able to use some other vBIOS with higher TDP already set. @Saltinbank may know a good vBIOS for you to use, I think maybe he has similar card and used other vBIOS too, but I'm not sure.
But, I do know you usually cannot edit vBIOS for modern Nvidia cards. Some you may get lucky and can mess with if you have programmer, but that is rare

* Edit - If you want me to post that other unlock BIOS menu attempt let me know, it may be OK and unlock, but also may fail and brick the BIOS entry (I suspect if this, you could reflash from DOS/Windows)

@saltinbank Hello sir can you help me please?
@Lost_N_BIOS these are pics from GPU Z
http://gpuz.techpowerup.com/21/01/04/5cj.png
http://gpuz.techpowerup.com/21/01/04/4tc.png

@Bunny98 - see my edit above
Not sure what you want me to do? You should have programmer in hand, and backup off the vBIOS chip directly, made, checked and confirmed OK first, and then you can try and see if you can edit TDP without bricking vBIOS.
But, I assume it's a no can do type of thing, since this is new/modern Nvidia, they sign the vBIOS and you can't edit.

@ket that applies to all 2060 laptop vBIOS too, correct?

@Lost_N_BIOS no thanks then I don't want to break anything but can u unlock hidden options for me without breaking the bios? if you don't mind :/

If you want for sure OK, best to ask for this model to get unlock over at BIOS-mods.com forum.
I've never unlocked this one, and since what I sent did not work, the only other module edit I see (SetupUtilityApp edit on top of SetupUtility edit I already sent you) may or may not be what's needed.

@Lost_N_BIOS yep, any vBIOS newer than Maxwell II is encrypted breaking that encryption isn't impossible but the effort to crack it would be monumental then you'd have the problem of unbreaking the encryption after performing any mods. Its a pain, its annoying, and fuck nvidia.

@ bunny so looking at your gpu-z's screenshot i guess you have V2 aka RTX 2060 refresh ?
Dont call me sir :) iam just poor guy to help you out ?
What is the matter of your problem ?
explain it to me ...


for me nvidia has done a joke with refresh 2060 ...
to put in a nutshell : they gave 15-20 Watts more but they restricted the bandwith ...
Sad play : on these architectures of gpu : Bandwith is the king - memory bandwith will give you massive boost in term of fps - overclocking the gpu not so ... plus iam running my babe alll the time 1650 mhz min 1780 mhz on average with only (80W + 15 watts mod Acer + pci express enhancements + and modded Vbios) ...
Can you confirm you cant even do this type of overclocking with 115W ?
or iam wrong ...

look at my settings :

@ket - Thanks, I thought so! How is this going on though? ^^ >>

@saltinbank - how are you using modified vBIOS? What did you dump/write with, and what did you actually modify, with what tools?

asus did it this is vbios swapping from a dump of Asus Laptop high end with custom made Vbios for RTX 2060 STRIX mobile (95W TDP)

As you can see acer one Vbios minimum clock was 960 mhz and 1280 mhz max in boost mod @ 90W (turbo mode on acer's laptop)
Asus one Vbios has 50 mhz boost from the get go : 1100 base clock and 1333 mhz @95W

Plus i have in can reach +250 Mhz on the GPU easily with my batch (my gpu is cherry picked i guess) and +1 Ghz on the GDDR6 ...
Performance are between a 1070 and 1070ti ...
Raytracing enabled i can beat a desktop 1080 if powerlimit dont kick in ...

@Lost_N_BIOS I don't know the details about the encryption nvidia and AMD are now using I can only say from what I'm aware they are a serious pain in the arse and slow any kind of real modding down substantially.

@saltinbank - Thanks, so your not using mod BIOS, your just using other branded matching hardware stock BIOS. Can you please post that vBIOS for @Bunny98 - or me, if it's BIOS we put into actual BIOS.
Thanks

@ket - Ohh no!! When did AMD start doing this??

@Lost_N_BIOS i used different laptop nvidia vbios i got higher score,fps etc but the gpu crashes after like 10mins so I restore my backup (

@saltinbank can i overclock my bandwith? )

Zitat von Lost_N_BIOS im Beitrag #746

---

@saltinbank - Thanks, so your not using mod BIOS, your just using other branded matching hardware stock BIOS. Can you please post that vBIOS for @Bunny98 - or me, if it's BIOS we put into actual BIOS.
Thanks

@ket - Ohh no!! When did AMD start doing this??

---

@Bunny yes you can and you should try to max it out ...
download MSI AB and overclock the memory try + 225 mhz and go for 25 mhz increment when you reached the max, Driver will BSOD or Freeze, then wait for driver to restart or restart your LAPTOP, plus dont overclock too much the memory because of ECC (memory error correction) you will loose some performance you have to find the best threshold (3d mark bencharking and Uniengine Heaven will do the work) ...

@Lost if you want but the TDP is 90W without turbo (80 an all Vbios) ...
The fact i can reach 95W TDP with turbo mode (90W with acer one).
V1 Vbios dont work on RTX 2060 refresh BTW : not the same chip (Memory Vram isnt the same) ...
Link of Vbios is on the topic do a search ...