Zitat von saltinbank im Beitrag #375

---

Hail to the king babe grin]

---

Ok C1E make turbo activated under c1 and c3 circumstances without it your stuck at 4ghz always I think the IMON 50 65353 does that trick and yeah maybe vcore is buggy but all do the magic no throlling for Aida 3600 is stable with more incore try +100 +120 and loosen your timing to make it stable don’t run your pc with faulty ram windows will be corrupt

Try 21 22 42 20 26 52782 674 6 4 9 18 9 3 @1.25/1.30V

Battlefield is gpu and cpu intensive ...

Your temps are damn hot thats a fact ...

of btw tha way apply good thermal pads and thermal grease on the cpu and gpu i gained 20C full load ...

And do you know if there is a special connector on the mother board for the turbo button mine is not working since dissasembly !

Well I'm not sure about stability of my current configuration,

with memory at 3200 with timings from XMP profile, undervolt -150 and uncore +0.02 I had one crash in Battlefield 5 but it was also gpu overclock 220/440 maybe it was too high

But main issue now is temperatures, in game I can't even handle 56W so thinking about reducing it back to 45W

There is new stress test in latest XTU version, it's CPU+ AVX2, whats your numbers there after 4 minutes with fans on auto?

With my config above (undervolt -150, uncore +0.02, 56W) I have CPU freq 3.97, temp is 75C average but with spikes to 82C, fans at 3000+3000 rpm



Turbo conn is under heatsink

And just one more note about my cooling, I replaced metal fan with another plastic one, it is more weak than metal but quiet on idle

So it resulted in higher temps of coz but I just can't bear constant 1680+2200 rpm on idle With both plastics I have very quiet 1680+1680 idle

If only we could hack those shitty fan curve table it would be the best laptop on the planet

Yeah right thank for the picture mate !

Ok for me i saw nobody on the net reaching past 3300 without OV uncore at leat +120 mV that a fact 00.1 keeps me smiling plus look at your picture of battlefield +220 on gpu means real turbo speed of 2135-2150 as you can see yours maxed out 90w pull 1700 MHz so lower at 170/400 gddr6 should try 800 then 1000 on the Vram you will gain better FPS overcooking the vram than the gpu because of TDP and mobile rtx can go Past 1200 MHz try it but lower gpu try 180/650 to be confident

Try this 150/400 you will see same clock under bf1 because you reached TDP rtx is maxed out 90w with 0.795V and your offset applied by nvidia algorithms is only +140/150 MHz with turbo no way + 220 ... you need to tweak voltage and gpu curves in afterburner

https://youtu.be/koBxaf-KZgo

https://youtu.be/_tkD2EeqJow

Run gpu z while gaming look monitoring if it says PerfCap reason is VRel and VOp. Which means max voltage is limited by the controller itself. And the controller well is controlled by bios

On more thing your chassis is smaller I think ph317 can dissipate more heat :)

Deleted .

Can you think we should upgrade to 1.10 PMC firware upgrade hyppo ?

https://global-download.acer.com/GDFiles...ACER&SC=EMEA_13

Hi Guys,

I've mostly worked on Desktop builds so most of the BIOS I work on usually has all the options unlocked. I've gone through this thread and feel like I can gain from unlocking my BIOS. I recently bought a Predator Helios 300 17" [PH317-53] and I'd like to know how I can unlock through software method, if it is possible. I've already updated to the latest version of BIOS 1.10, which I hope wouldn't create a roadblock.

@Lost_N_BIOS I've seen your posts and replies to them and feel like you can help me with this. Can you tell me the steps to follow to get things done. I don't want to go the Hardware route yet, I'd like to try the less intrusive options first. I've got enough experience programming, running OCs on multiple devices and tweaking other settings from BIOS, but please consider me a noob for this exercise and can you walk me through all the steps to get BIOS unlocked. Also, it would be great if you can tell me what options are there to unlock, so if I don't need any of them, I can skip unlocking those parts if it is allowed by the BIOS.

I happen to have a 315-52, and i was wondering if anyone has a fully unlocked dump of a good bios. i want it to actually UNDER volt the cpu and underclock it. I dont use the laptop for playing, just some network stuff and i would like the battery life to be better.
I have a minipro programer. tl826 i think. i can flash the bios directly no problem, but i dont want to waste time making a good dump and i would not know how to modify it to begin with.
Latest version anyone has would be great.

Thank you in advance!

@coolgeevee @Restrected - I "Think" we can do via FPT, I tried to look back and confirm but this thread is too long. * Found it!

coolgeevee - Please link me to your stock BIOS download page

Restrected - if you want to dump and mod yourself with programmer, I posted the edit edit to make for menu unlock here in post #78

To do without programmer, both of you, please download this package and follow along so we can disable FPRR (error 167) and allow FPT BIOS region reflash of mod BIOS
http://s000.tinyupload.com/index.php?fil...686191681525318

Run the command shown below from the folder that contains the exe, using Admin CMD Prompt. Then upload vars.txt to me
Select that folder which exe is directly inside, hold shift and press right click, choose open command window here (Not power shell).
If you are on Win10 install this registry edit that adds "Open command window here as Administrator" to the right click menu
Double-click to install, reboot after install may be required (Do reboot just to be sure)
http://s000.tinyupload.com/index.php?fil...134606820377175

H2OUVE.exe -gv vars.txt

Ill work on this in an hour or so. just woke up so coffee first.
and thank you Lost_N_BIOS!!!
----------------------

I ran that and it gives me this
" Now parsing Variable Information.
LoadDeviceDriver fail, GetLastError = 0x430
Failed to get bios data!
Fail to get Variable Information"

I guess that the included dll is the wrong one? i ran as admin, im sure of that.

*Nevermind. It was my antivirus deleting the sys file. Fixed it now and i have the vars.
See attached.

@Restrected - You're welcome! Please put that in a zip, thanks. Due to how our forum software handles text attachments I can't use it like that