I will check your guide soon, thanks

I have I’ve more problem - I can’t get 90W on gpu in extreme/turbo mode

Although earlier I had it, I saw it by my own eyes, on my previous windows instances

Any idea how to get 90W back ?
I just reinstalled windows but no luck

http://forum.notebookreview.com/threads/...s.830371/page-4

read this ... download Hwinfo64 ...

one more thing could please launch a gpu stress with furmark https://geeks3d.com/furmark/ iam shocked the rtx 2060 pull 81W only @ 1000 mhz so low i dont understand even with turbo on ...


could you confirm this ?! :[

tomorow ill will retest 90W asus bios and Modded Nvidia drivers if i will get some improvement (10% with both said someone)

tomorow a coffee cup and benchmarking session with ram@3.5 ghz will see tha result of all of three thrings coupled together !

good night buddy :)

I found the reason, it's new drivers 442.19 blocks high limit
on previous 441.87 I have 90W

And I reached good scores with increased overclock

ok planning today to edit and update CSME ...

i looked for 300/240 series :

H370 stepping B0 for Acer predator 2019 so i dont get wrong we have to use CSME V12 right ?

Ok start compiling ME analyser will see if i can brick my laptop again ;)

PS C:\Users\SaltinBank\Desktop\Applications\Intel CSME System Tools v12 r19\MEInfo\WIN32> .\MEInfoWin.exe
Intel (R) MEInfo Version: 12.0.47.1524
Copyright (C) 2005 - 2019, Intel Corporation. All rights reserved.

Intel(R) ME code versions:

BIOS Version V1.08
MEBx Version 0.0.0.0000
GbE Version Unknown
Descriptor Version 1.0
Vendor ID 8086
FW Version 12.0.40.1433 H Consumer
LMS Version 1927.14.0.1305
MEI Driver Version 1931.14.0.1323

PMC FW Version 300.2.11.1020

PCH Information
PCH Version 12
PCH Device ID A30D
PCH Step Data B2
PCH SKU Type Production PRQ Revenue
PCH Replacement Counter 0
PCH Replacement State Disabled
PCH Unlocked State Disabled

FW Capabilities 0x31119140

Protect Audio Video Path - PRESENT/ENABLED
Intel(R) Dynamic Application Loader - PRESENT/ENABLED
Intel(R) Platform Trust Technology - PRESENT/ENABLED
Persistent RTC and Memory - PRESENT/ENABLED


Capability Licensing Service Enabled
End of Manufacturing Enable No
Local FWUpdate Enabled
OEM ID 00000000-0000-0000-0000-000000000000
Integrated Sensor Hub Initial Power State Disabled
Intel(R) PTT Supported Yes
Intel(R) PTT initial power-up state Enabled
OEM Tag 0x00
PAVP Supported Yes
Post Manufacturing NVAR Config Enabled Yes
TLS Disabled

FW Type Production
Last ME reset reason Global system reset
BIOS Config Lock Enabled
Host Read Access to ME Enabled
Host Write Access to ME Enabled
Host Read Access to EC Enabled
Host Write Access to EC Enabled
SPI Flash ID 1 EF4018
SPI Flash ID 2 Not Available
BIOS boot State Post Boot
Slot 1 Board Manufacturer 0x00000000
Slot 2 System Assembler 0x00000000
Slot 3 Reserved 0x00000000
M3 Autotest Disabled
EPID Group ID 0x28C9
Keybox Not Provisioned
Minimum Allowed Anti Rollback SVN 1
Image Anti Rollback SVN 5
Trusted Computing Base SVN 1
Re-key needed False
HW Binding Enabled


FPF UEP ME FW
*In Use
--- --- -----
Enforcement Policy 0x00 0x00 0x00
EK Revoke State Not Revoked Not Revoked Not Revoked
PTT Enabled Enabled Enabled
OEM ID 0x00 0x00 0x00
OEM Key Manifest Present Not Present Not Present Not Present
OEM Platform ID 0x00 0x00 0x00
OEM Secure Boot Policy 0x00 0x00 0x00
CPU Debugging Enabled Enabled Enabled
BSP Initialization Enabled Enabled Enabled
Protect BIOS Environment Disabled Disabled Disabled
Measured Boot Disabled Disabled Disabled
Verified Boot Disabled Disabled Disabled
Key Manifest ID 0x00 0x00 0x00
Persistent PRTC Backup Power Enabled Enabled Enabled
RPMB Migration Done Disabled Disabled Disabled
SOC Config Lock Done Not Done Done
SPI Boot Source Enabled Enabled Enabled
TXT Supported Enabled Enabled Enabled

ACM SVN FPF 0x00
BSMM SVN FPF 0x00
KM SVN FPF 0x00
OEM Public Key Hash FPF 0000000000000000000000000000000000000000000000000000000000000000
OEM Public Key Hash UEP 0000000000000000000000000000000000000000000000000000000000000000
OEM Public Key Hash ME FW 0000000000000000000000000000000000000000000000000000000000000000
PTT Lockout Override Counter FPF 0x0A
PS C:\Users\SaltinBank\Desktop\Applications\Intel CSME System Tools v12 r19\MEInfo\WIN32>

now will do full dump because there is no ME region in it : so as advice by lost done a full dump


C:\Users\SaltinBank\Desktop\Applications\Intel CSME System Tools v12 r19\Flash Programming Tool\WIN32>FPTw.exe -d nameoffile-completebios.bin
Intel (R) Flash Programming Tool Version: 12.0.40.1433
Copyright (C) 2005 - 2019, Intel Corporation. All rights reserved.

Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q128FV ID:0xEF4018 Size: 16384KB (131072Kb)


- Reading Flash [0x1000000] 16384KB of 16384KB - 100 percent complete.
Writing flash contents to file "nameoffile-completebios.bin"...
Memory Dump Complete
FPT Operation Successful.

acer is a lazzy bitch thats a fact now !

https://imgur.com/a/E21sc9T

ok continuing to brick the pc step 3 ( could one day help someone on the thread asking same questions i was asking)

next step using the right CSME V12 for 300/240 series :

so intel CSME Firmware v12.0.49.1534 (CON H BA) .rar downloadable here :

https://mega.nz/#!6N0GAAAb!udaWcCi2hgvE3...HEWYIq7UsgNP08A

as we can see FW UPDATE is not in IMPOSSIBLE state so good so far and we can see it is the LAST UPDATE :



now we choose from the upper BOX the right plateform H for us here and the SKU aka predator as an H370 chipset ...

we dropped down or loaded the last ME firmware aka 12.0.49.1534_CON_H_BA_PRD_EXTR

and now we change this :

Load/drop the chosen CSME firmware image and then input the chosen PMC firmware at "Flash Layout" > "Ifwi: Intel(R) Me and Pmc Region" > "PMC Binary File".
Adjust "Flash Settings" > "Flash Components" > "Number of Flash Components" to "0".
Adjust "Integrated Sensor Hub" > "Integrated Sensor Hub" > "Integrated Sensor Hub Supported" to "No".
Build the image and use "cse_image_FWU_Full.bin" at Intel FWUpdate tool.

good to go and creat the full image :

Guys i made the full image aka cse_image_FWU_Full.bin ...

Could a good soul give me the right parameters to flash it with FWPT.exe i dont want to make a mistake thanks in advance !

ok so i used FWupdate aka FWupdlcl.exe (win32):

C:\Users\SaltinBank\Desktop\Applications\Intel CSME System Tools v12 r19\FWUpdate\WIN32>FWUpdLcl.exe -fwver
Intel (R) Firmware Update Utility Version: 12.0.47.1524
Copyright (C) 2005 - 2019, Intel Corporation. All rights reserved.

FW Version 12.0.40.1433

C:\Users\SaltinBank\Desktop\Applications\Intel CSME System Tools v12 r19\FWUpdate\WIN32>FWUpdLcl.exe
Intel (R) Firmware Update Utility Version: 12.0.47.1524
Copyright (C) 2005 - 2019, Intel Corporation. All rights reserved.

FWUpdLcl.exe [-H|?] [-VER] [-EXP] [-VERBOSE] [-F] [-Y] [-SAVE]
[-FWVER] [-PARTID] [-INSTID] [-ALLOWSV] [-FORCERESET]
[-SILENT] [-OEMID] [-PARTVER] [-PARTVENDOR]

-H|? Display help screen
-VER Displays version information.
-EXP Displays example usage of this tool.
-VERBOSE <file> Display the debug information of the tool.
-F <file> File used for updating the FW.
-Y Automatically answer Yes to prompts.
-SAVE <file> Save the current FW to an update image.
-FWVER <file> Display the FW Version of current FW or update image.
-PARTID <Partition ID> Provide specific Partition ID to perform partial update.
-INSTID <Instance ID> Provide specific Instance ID of a partition to perform partial update.
-ALLOWSV Allows same version firmware updates.
-FORCERESET Automatically Reboots system after update (if needed).
-SILENT Update without display and without user prompts.
-OEMID <UUID> OEM ID needed to perform firmware update.
-PARTVER <Partition ID> Display the Version of specific partition.
-PARTVENDOR <Partition ID> Display the Vendor ID of specific partition.

Error 37: Invalid command line option(s).

C:\Users\SaltinBank\Desktop\Applications\Intel CSME System Tools v12 r19\FWUpdate\WIN32>FWUpdLcl.exe -F cse_image_FWU_Full.bin
Intel (R) Firmware Update Utility Version: 12.0.47.1524
Copyright (C) 2005 - 2019, Intel Corporation. All rights reserved.

Checking firmware parameters...

Warning: Do not exit the process or power off the machine before the firmware update process ends.
Sending the update image to FW for verification: [ COMPLETE ]



FW Update: [ 100% (\)] Do not Interrupt
FW Update completed successfully and a reboot will run the new FW.

C:\Users\SaltinBank\Desktop\Applications\Intel CSME System Tools v12 r19\FWUpdate\WIN32>FWUpdLcl.exe -fwver
Intel (R) Firmware Update Utility Version: 12.0.47.1524
Copyright (C) 2005 - 2019, Intel Corporation. All rights reserved.

FW Version 12.0.49.1534 !!!

omg finnally :) rebooting if iam gone ...
I totally fucked up the operation :(

Edit work flawlessly and thanks to win-raid i earned +12 pts in skills perk tree and +5 IQ for understanding what it should be done ...

:) System secured already patched !

nope modded driver X-G wont install i'll stick to these stock ones ...

New bios manual more compliant with our hynside bioses

http://www.vecow.com/dispUploadBox/PJ-VECOW/Files/2276.pdf

Hello, @Lost_N_BIOS. I'm interested in unlocking the advanced menu in the BIOS of my predator ph317-53. I have read post #107 and followed step 1 of it.
As you suggested on #107, I uploaded vars.txt after running the command H2OUVE.exe -gv vars.txt
Here's the link.
http://s000.tinyupload.com/?file_id=37947588755144084796

By the way, my predator has rtx 2070 max-q, bios version is 1.08.
Thanks in advance.

Zitat von saltinbank im Beitrag #370

---

New bios manual more compliant with our hynside bioses

http://www.vecow.com/dispUploadBox/PJ-VECOW/Files/2276.pdf

---

Nice Hyppo !

yep the manual contains all the bios settings explained :)

Btw now my ram is running @ 3600 mhz holly shit CAS 21 (21-22-42-20) with uncore set to 130mv (+)

10 GB/s gained in read ops ! (41.8 stock -) 52 now) that's a shame intel dont allow this stock without overclocking and i save some bucks not buying expensive ram ...

Still stucked with the faulty nvidia driver @ 80W waiting for a new one lazzy do downgrade it ...

will post my benchmarks score in couples of weeks : iam tweaking the 9750H with throttlestop guide i found : tweaking VCore offset - 250 MV !!! and -175 Mv for the cache voltage with +130 MV for System agent aka uncore give me a full stable 4ghz / 4.2 LLC northbridge / ram 3.6 ghz not throttling @ 56W !!! iam so pleased temp are not excceeding 72C after two hours of Aida torture test !

between 3 and 20 fps improvements an all my games ( ARMA3,DCS, Insurgency, Rainboww six, Control) ...
Without overcloking the card with 90W ! so i am waiting massive improvement with RTX @ 1900 mhz and Vram @ 2050 mhz ...
i wish in several month we could improve the GFX with a 100/110W Vbios mod ...

anyway eating all the 1070/1080 Max-q and 2060/70 max Q ...

oh i forgot a good one for you hyppo test this !

Then go to Advanced > Power & Performance > CPU - Power Management Control > CPU VR Settings > Core/IA VR Settings

Set IMON Slope to 50
Set IMON Offset to 51999/52999 try both
Set IMON Prefix to "-", This is important, if you set it wrong you'll throttle like no tomorrow.

Save and Reboot.

What this does is to have a negative offset of -51.999W on the reported TDP,

So the CPU will be tricked and thinks that the TDP limit has not been reached.

bybybye throttling ! WATCH YOUR TEMPS CUZ NOW CPU IS UNLOCKED AND VRM WILL KICK HARD WITHOUT MASSIVE UNDERVOLTING !!!

Hail to the king babe

Set IMON Slope to 50
Set IMON Offset to 65535 max !
Set IMON Prefix to "-",

install throlltstop : set P2 80W P1 60 W lock TDP with driver enforcement !
UV vcore -250 Mv !!!!
UV cache core - 150 Mv !!!
desactivate in FIVR PPo !
Desactivate C1E and Speedshift !

run cinebench ! no more throttling !
I blow the Walmart pc with 200W power supply !
3059 R20 vs me 3125 !

You cant touch this ! :) finally main goal reached ! loop cinebench no throtte 4ghz always vid Between 1.179 V and 1.125V temps max 79C

my new 24/7 daily settings for playing and iddling !