I edited some links above. Yes, it's for "All core max turbo" kind of thing, I don't think it has anything to do with voltages, unless you had them set to auto.

I'll make you BIOS with all this stuff visible. First, do you know if you can M-Flash mod BIOS on this board or not?
If you are not sure, please try M-Flashing this BIOS, I did simple edit and updated a CPU microcode only (506E3). I will remove this update in next BIOS, in case you don't want those updated, unless you want them all updated?
Leave file name.extension as it is (stock BIOS name). If this does not work, I'll have you make a FPT BIOS region dump and we'll do it that way instead, info on this to follow if required.
http://s000.tinyupload.com/index.php?fil...989854263437978

DO NOT try to push forward with this file and AFU or something else, if M-Flash wont allow the flash, stop and wait for FPT instructions.
The ONLY goal here is to test if M-Flash allows mod BIOS flash or not, we're not trying to make this BIOS flash in no matter what, it's nothing to do with the end goal, only a M-Flash test.

So Im just trying to see If I can M-flash this BIOS right? not actually flashing it?
p.s sorry for the bold letters and the other account thing, was just frustrated because I couldn't find anything regarding this

* Edit - I went into the bios and tried M-flashing it, and it worked! but I didn't flash it because you said don't

You can flash it if you want, sorry for not making that clear. I only added all that other stuff so you wouldn't go off on a tangent trying to flash the BIOS in other ways, as that's not our goal here and I suggest you don't try to flash it any other way.
I suspected that way you replying to yourself! Thanks for being honest and coming clean about it. You replied to yourself less than 10 minutes after your first post, you could have waited a day or two at least, then it may not have caught my attention so easily

Good to know you think you "can flash it", but please now go ahead and flash it with M-Flash, so we are 100% sure you can flash it with M-Flash.
Then wait patiently, I am leaving now and may not be back until tomorrow, could be back later but unsure.

Ok I flashed the BIOS you provied, and it works just fine for me. You can keep CPU microcode update if it's any helpful, that's fine for me.

Good, thanks for confirming. Do you want me to go ahead and update all the other microcodes too, might as well I guess. That way this will be a more complete BIOS mod once done, since stock BIOS and M-Flash can be used, that way everyone can use it
I will work on making all that visible for you now, please wait.

Yeah sure you can if you have the time.
I'll be waiting

@slugger - quick single setting test needed before I do them all. Please test these BIOS, in the following order, stop testing (no further BIOS needs tested) once "Enhanced Turbo" setting is visible in OC section and let me know which BIOS showed the setting
1. SetO
2. AMITO
3. SetAMITB

Rename each file to stock name.extension (E7A69IMS.A60) before putting on USB to M-Flash, do this one at a time so you don't get files mixed up, that way you can keep track of which works first to let me know.

If, during any test, you cannot enter the OC section, it's OK/expected at some edit method fails, reboot and then go right to M-Flash and reflash stock BIOS or move onto next test BIOS.
This is point of this test, to see which of three methods is required for this BIOS, to make hidden setting visible.

Also, I meant to ask before and forgot, please confirm, in "Settings" section, can you see Access Level anywhere?
I assumed Admin/Super in above edit, if all fail, may need to test User instead, especially if you cannot see Access Level to give me actual current value

http://s000.tinyupload.com/index.php?fil...458031338015292

Ok so I went ahead and dowloaded all 3 and lined them up like you said. Flashed the first one (SetO), and it worked!
Now I can see the "Enhanced Turbo" setting. So I didn't try the other two.

And also I checked my settings menu and and couldn't encounter Access Level, or anything that sounds similar to that. But I guess it doesn't really matter at this stage.

Great, stop there, thank you for the info, now I will make the rest of the settings visible.
Yes, no need to worry about Access Level for right now, we may need to try Admin/Super or User later, if some other setting doesn't become visible by setup edit like the Enhanced Turbo did, but we'll cross that bridge later if we run into it.

Please wait, I will try to get the rest done for you tonight, if not I will by tomorrow for sure.

* Edit - @slugger - here is mod BIOS with all the rest of what I mentioned hidden on page one, now revealed.
OC Genie, Enhanced Turbo, Base Clock and Base Clock mode, CPU Core/GT Voltage Mode, CPU Core Voltage, CPU Core Voltage Offset Mode, CPU Core Voltage Offset (+Same 3 for GT voltage), CPU PLL SFR Voltage, OC Retry Count, OC Quick View Timer
Also, I updated all CPU microcodes in previous mod I sent, that is now carried over as well.
http://s000.tinyupload.com/index.php?fil...160796205763132

First off all, Thank you so much for taking your time and doing it for me.
The settings you made made visible works perfectly fine, I just have one more question.
Is the situation that's happening to me in the video I attached (CPU Core ratio not getting more than 45). Is that something that MSI artificially locked via software (meaning that it is moddable) OR is that something with the B250 chipset that is not changable/unlockable?

Thank you again for all your hard work!

@slugger - You're welcome!

I think it's due to B250 chipset, this is not meant to even have any options I made available to you.
Can you increase it over that with XTU in windows? If yes, then maybe some BIOS setting/combo is needed

No, XTU doesn't allow me to increase it.

Then it's chipset locked If you can find someone using B250 with higher multi let me know, I will check out it's BIOS options and see if I can spot anything.

Well that's okay, You have already helped me more than enough :)
Let me know if you find anything.

I hate to revive an old topic but the links for the bios mods are dead. Is there anyway to get them reuploaded? Thank you in advance.