MB: Asrock Z68 Extreme3 Gen3
SSD:OCZ Solid3 60G firmware 2.25
build RAID 0

I've flashed MB bios which downloaded from "ftp://thoosa.no-ip.org/"
and checked OROM version is 12.6.0.1867, than install RST Driver 12.6.0.1033, but trim still not work
please help me how to fix the problem

i used to HxD Editor to test a file insert to C:\, than record cylinder address, when i use shift + delete kill the file , usually find the same String at cylinder address

wjChen

-------------------------------------------------------------
yes i sure. That ocz solid3 is support trim, and I've intall windows 7 on just one OCZ Solid 3 60G disk, trim can work!

I will try your method!
and feedback if successful or not.
thank you.

I've flashed bios(contain Intel Raid ROM v11.6.0.1.1702), rebuild raid 0 array, reinstall Windows 7 Unlimited x64, install asrock Z68 Extreme3 Gen3 Disc Driver for all, update Intel RST Driver to v11.7.4.1001
I executed DriveControllerInfo software but still not display brush in my raid 0 disk.
I put a file and delete in C:, than use HxD Editor check should trim be clean area, but the String still alive.
now I have no idea.
is someone procedure error??
Sorry to take up your valuable time.

wjChen