@HEADLESS - It looks like you have it all connected correctly.... And BIOS looks OK!

Here is fixed BIOS with latest fixed ME FW, with unlocked FD in case you run into issues in the future this will help you reflash via FPT without having to use programmer every time.
http://s000.tinyupload.com/index.php?fil...325435493401726

okay then . now I will continue PART 3 ([GUIDE] Flash BIOS with CH341A programmer) right? and what I am going to do after
@Lost_N_BIOS

@HEADLESS - Sorry for not saying, yes, please go ahead now and erase chip, blank check, then open the BIOS I sent you, then write/verify.

Then remove power cable from board if not already, leave board sitting for 1+ minute without any power. Press and hold the power on button for 10-15 seconds, or short pins.
Then connect power, hook everything back up and boot to BIOS and load optimal defaults, then make any changes you need and save and exit.

WE DID IT. I erased and wrote your file sent me before. there is no shutting problem anymore. there is no exclamation mark on TXE driver. After fixed, tablet let me update the bios versiyon from 1.40 to 1.80. Every things working fine. THANK YOU SO MUCH.
But How did you fix the file I sent you. Please share us @Lost_N_BIOS

@HEADLESS - Great to hear all is now working properly! You're welcome!

Yes, as Plutomanic mentioned above, I simply ran your dumped BIOS through his linked guide, replacing your old ME FW with new latest version FW and transferred your original ME FW settings.
That could be done with same version old FW too, if you wanted, but I suspected you'd probably want the latest version so I updated it for you while I was there.

Zitat von Lost_N_BIOS im Beitrag #21

---

@HEADLESS - Great to hear all is now working properly! You're welcome!

Yes, as Plutomanic mentioned above, I simply ran your dumped BIOS through his linked guide, replacing your old ME FW with new latest version FW and transferred your original ME FW settings.
That could be done with same version old FW too, if you wanted, but I suspected you'd probably want the latest version so I updated it for you while I was there.

---

Zitat von elsacorv im Beitrag #22

---

Zitat von Lost_N_BIOS im Beitrag #21

---

@HEADLESS - Great to hear all is now working properly! You're welcome!

Yes, as Plutomanic mentioned above, I simply ran your dumped BIOS through his linked guide, replacing your old ME FW with new latest version FW and transferred your original ME FW settings.
That could be done with same version old FW too, if you wanted, but I suspected you'd probably want the latest version so I updated it for you while I was there.

---

@Lost_N_BIOS
Excuse me, can re upload fixed dump? (tinyupload is down)

I worked with 25q64 at 3.3v before know it was 1.8v and now dont power on :S

---

I flashed the bios and the same. i Discard now the bios chips.

Its obiusly i damaged something in motherboard for the 3.3v ( 5v at datalines)


Thanks you @HEADLESS @Lost_N_BIOS