Hi friend, your result file is empty, so there are two possibility :

1. CPU not Intel , but AMD
2. Backup_Tool needs to be runned as Admin

so if not 1, try the 2 , run it as Admin etc post result , then use the FPT15 too to make a Bios Backup , run this command from a Command Line Interpreter (CLI)
with Admin rights :

fptw.exe -d biosreg.bin -bios

Let me know
Regards

@BDMaster

Sorry, I tried again and it seems to work this time. Here are the results and the BIOS backup: drive . google . com/drive/folders/1cX1YUPkJJ6XhMT30_j_mp-ndkPHg8Pk4?usp=sharing

Question!

For the current version of Rufus, the Boot Selection choices are different from the original Notebookreview thread.

I think the 2 possible choices are "Non bootable" and "UEFI:NTFS". Which one should I choose?

Thanks!

@Veritable
Not bootable , only FAT32 , it needs for UEFI bios to boot from USB , then you have to create a folder into the path , follow the tutorial :

https://nstarke.github.io/firmware/uefi/...ing-ru-efi.html

To access the UEFI menu, create a bootable USB media:

Format a USB device in FAT32.
Create a directory on the USB device:

/efi/boot/

Copy the file shell.efi to the directory created above (shell.efi from RU shell site)

http://ruexe.blogspot.com/2020/05/ru-5250379-beta.html

Rename the file RU.efi to BOOTX64.efi
Restart the system and enter the UEFI menu.
Select the option to Boot from USB.

Regards

@AoLun
Hi friend, there are your NVRAM Variables to set to 0x00 :

BIOS Lock VarOffset - 0x1C
FPRR VarOffset - 0x683

Your bios is like that of Mercury ...

Follow the tutorial unlock the Eeprom by RU shell and use this bios mod , flash it by double click on Write.bat :

https://www.mediafire.com/file/hjxgaoqn9...02_Mod.rar/file

When you got your goal, then make a Bios Menu Tabs photo to see that all is been done ...
Let me know
Regards

@BDMaster

It worked, thank you very much for your help :)

@AoLun

You're welcome and thanks for your report !
Regards

@BDMaster:
Thank you. I got RU working now. It seems to shut off and cause the computer to reboot if I sit there for too long, but once I know which variables to edit then I will try to be quick :-)

Here is my results file: sendspace(dot)com/file/nh7v9x
I have an Aero 15 YD on BIOS FB04 / EC F004

Edit by Fernando: Unneeded fully quoted post replaced by directly addressing to its author (to save space)

Hi friend, you have made this result after the mod ?

It shwon the Error 167 so Eeprom is write protect ...

Your NVRAM variables are these :

FPRR VarOffset - 0x683

BIOS Lock VarOffset - 0x1C

If you have a doubt then ask to me, make a photo and upload and i will reply ...

To check if your eeprom is unlocked use BACKUP_Tool to get the result file , then unpack the result and look for this file

write_15.0.1.1347.error.log , if there isn't then it's unlocked, but you will see during the result creation file too ;)

This is your Bios Mod , you can rewrite back by double click on Write.bat program , after you will unlocked the Eeprom :

https://www.mediafire.com/file/ap9vj3omv...04_Mod.rar/file

Ket me know
Regards

P.S. as i say to anyone, after the mod please post a photo of unlocked bios to check if all is gone well !

@BDMaster

Please unlock and mod my bios. I have a Aero 15 oled 11th gen YD rtx 3080 I want to under volt and need to change ram settings to use balistix ram 32000 CL 16

https://www.sendspace.com/file/glpxwy

Zitat von BDMaster im Beitrag #534

---

Hi friend, you have made this result after the mod ?
It shwon the Error 167 so Eeprom is write protect ...

---

@god503

Hi friend, file empty , look above there is the FPT15, if the result will be again empty then get a bios backup by FPT15, try to run the tool as Admin ...
Regards

@BDMaster

i hope this is the one. I use the dump.bat file to create it

https://www.sendspace.com/file/td74zx

@god503 hi friend, this one is good ...

Here you go :

https://www.mediafire.com/file/e6e9usyq6...03_Mod.rar/file

Flash it by Write.bat ... post a Bios Photo to check it ..

Let me know
Regards

@BDMaster
:
Running it as admistrator but getting these error messages

Error 51: Could not access PCI device.

Error 51: Could not access PCI device.

Error 64: Failed to initialize SPI interface.

FPT Operation Failed.