Also, I enabled ETU in the Bios. However, nothing seems to work.

https://1drv.ms/u/s!Atb9t3ChBFJqi_l-SX09d5W07n4BAA?e=eHOcMl

Also I see the PC also doing thermal throttling.

Also, I went to Power and performance-> CPU Power management control -> CPU Lock configuration-> CFG Lock was on, so I disabled it. Still I can't Overclock.

Regards,

I could undervolt the CPU through the Bios (Currently -50 mV) i7 10870H . However, I wonder how to setup the timings for the RAM and not get a bricked laptop.

This is the RAM that I have. Currently running at 2600 Mhz. The manufacturer says that they run at 3200 Mhz with XMP but the Gigabyte AERO 15 KC doesn't support that feature. So, How can I setup that speed?
https://1drv.ms/u/s!Atb9t3ChBFJqi_l_fucg8L0wgaJBHA?e=MKMDqY

I was able to apply the XMP profile through the Bios. Also, I increased the VCCIO/VCCSA to 1.15 volts .. Just in case. Hopefully, everything worked. Now I have the laptop running at 3200 Mhz with an Undervolt in the bios with -50 mV. Maybe I can apply more undervoltage.

However, now I'm interested in enable USB wake up. Could you, please, let me know where I can find that feature in the bios?

Hi guys,

I have a Gigabyte Aero 15 OLED XD (Intel i7 11800H) and would like to use XTU or Throttlestop to undervolt my CPU.

I am still new here in the forum and therefore wanted to ask if a BIOS unlock can unlock this. Has anyone here already had experience, or can held me to unlock this feature?

Thanks for the help

I found the BIOS dump-Tool from @BDMaster and create a backup of my Bios.

sendspace.com/file/c6bbjt

I think that can help you :)

Ok friend; you have to unlock the eeprom Write settings these variables by RU shell and using the FPT 15 make a bios backup.

FPRR VarOffset - 0x683
BIOS Lock VarOffset - 0x1C

You'll find under PchSetup [4570B7F1-ADE8-4943-8DC3-406472842384] GUID

Here there are the RU links and tutorials and the FPT15 to use :

[Request] Gigabyte Aero 15 OLED BIOS unlocked (27)

[Request] Gigabyte Aero 15 OLED BIOS unlocked (27)

https://nstarke.github.io/0037-modifying...ing-ru-efi.html

http://ruexe.blogspot.com/2020/05/ru-5250379-beta.html

http://ruexe.blogspot.com/2020/05/ru-5250379-beta.html

To make a bios backup, just run by double click Dump.bat program into FPT15 folder, then to reflash back the biosregmod.bin , put it into the folder and run at
same way the Write.bat program.

After Flashing the mod , please make a Bios Menu Tabs Photo and upload here to check that all is ok

Let me know
Regards

@BDMaster

Hey thx for the links...

Here is my dump: ht tps://w ww.sendspace.com/file/nl10lb

i add some " "

Ok friend, unpack and flash as well as ...

https://www.mediafire.com/file/8pj7holsr...11_Mod.rar/file

After Flashing the mod , please make a Bios Menu Tabs Photo and upload here to check that all is ok

Let me know
Regards

thx :)

I think everything is working correctly

@

Zitat von BDMaster im Beitrag #476

---

Here you go :

https://www.mediafire.com/file/7c3cc6ofl...02_Mod.rar/file

Flash it by fpt :

fptw.exe -f biosregmod.bin -bios

Then if all is ok , make the Bios unlocked photos and upload the for me here ...
Let me know
Regards

---

BDMaster, hi
0. I make backup stock bios Fptw64.exe -d biosorig.bin -bios
1. I found my unlock addresses 0x17 and 0x6DD.
2. Made a bootable USB flash drive with RU.EFI
3. If trying to change 0x17 in Setup, it gives an error (Write variable failed: 0x0000001A), if trying to change 0x17 in PCHSetup, then ok. Reboot and i can restore my stock bios biosorig.bin normal.
P.S. 0x6DD in Setup and PCHSetup = 0

I can not understand unlock or not bios!?!?

- It's my backup stock (biosorig.bin)
https://drive.google.com/file/d/1iuHNEcc...iew?usp=sharing

- It's my mod bios (0x17=00) in PCHSetup (biosunlock.bin)
https://drive.google.com/file/d/1MhMqSUT...iew?usp=sharing

In bios, I need:
1. Change XMP profile (3200 memory)
2. Settings for IGPU (I need to set DVMT PREALLOCATED = 64, DVMT TOTAL GFX MEMORY = 256, APERTURE SIZE = 256 (or 512 or max)
3. The possibility of undervolt the CPU to reduce the temperature.

4. All other useful settings that I might find useful :-)

Thanks a lot in advance for your help !!!

@Apollozyn

Here you go (included patch FB09 SA) :

https://www.mediafire.com/file/cy4lea4j0...+Patch.rar/file

Flash by FPT :

fptw.exe -f biosregmod.bin -bios

Here is explaned the UEFIPatch use :

1. Use Drag'nDrop mode, just drag'n'drop the biosreg.bin (bios backup file) on it and it will give the patched one.

2. Use a Command Line window, just open it from biosreg.bin folder (go to FILE menu tab folder) by PowerShell and then run cmd.exe + Enter, write Uefipatch_039.exe biosreg.bin and it will give the patched one.

!!! IMPORTANT AND AWARE !!!

Look the log anyway and check that the patched offsets are like these :

parseBios: unaligned revision 2 volume
parseFile: non-empty pad-file contents will be destroyed after volume modifications
patch: replaced 2 bytes at offset 4FB60h 1727 -> 1127
patch: replaced 2 bytes at offset 4FB88h 1827 -> 1227
patch: replaced 2 bytes at offset 4FBB0h 1927 -> 1327
patch: replaced 2 bytes at offset 4FC00h 1B27 -> 1627
patch: replaced 18 bytes at offset 4FC18h 4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000
patch: replaced 2 bytes at offset 507F0h 1727 -> 1127
patch: replaced 2 bytes at offset 50810h 1827 -> 1227
patch: replaced 2 bytes at offset 50830h 1927 -> 1327
patch: replaced 2 bytes at offset 50870h 1B27 -> 1627
patch: replaced 18 bytes at offset 50880h 4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000
Image patched

These have to be in the same format !!!

1727 -> 1127
1827 -> 1227
1927 -> 1327
1B27 -> 1627
4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000
1727 -> 1127
1827 -> 1227
1927 -> 1327
1B27 -> 1627
4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000

That will means that patched is good :)

@member1800

Hi friend, the BIOS Lock VarOffset - 0x17 is unlocked as you were into wrong GUID "Setup" and not into the right one "PchSetup" , so you have to choice the second to find the var to edit.
You made well to attach the pictures ;), but as the BIOS Lock VarOffset - 0x17 by Default is 0x00 you can try to flash the bios mod also, so here you go :

https://www.mediafire.com/file/kjo5dk0e9...03_Mod.rar/file

Flash by FPT :

fptw.exe -f biosregmod.bin -bios

Manufacturer - GIGABYTE
Model - AERO 15
BIOS release - FB03 12/18/2020
BIOS platform - AMI Aptio 5

parseFile: non-empty pad-file contents will be destroyed after volume modifications
patch: replaced 2 bytes at offset 503B0h 1727 -> 1127
patch: replaced 2 bytes at offset 503D0h 1827 -> 1227
patch: replaced 2 bytes at offset 503F0h 1927 -> 1327
patch: replaced 2 bytes at offset 50430h 1B27 -> 1627
patch: replaced 18 bytes at offset 50440h 4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000
patch: replaced 2 bytes at offset 509A0h 1727 -> 1127
patch: replaced 2 bytes at offset 509C8h 1827 -> 1227
patch: replaced 2 bytes at offset 509F0h 1927 -> 1327
patch: replaced 2 bytes at offset 50A40h 1B27 -> 1627
patch: replaced 18 bytes at offset 50A58h 4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000

Try this one , to check if Eeprom is unlocked, then if it's ok go into bios to check all options and if there aren't which you find , i will modify to unlock them !
Let me know
Regards

BDMaster, THANK YOU VERY MATCH !!!

Zitat von BDMaster im Beitrag #492

---

@Apollozyn

Here you go (included patch FB09 SA) :

https://www.mediafire.com/file/cy4lea4j0...+Patch.rar/file

Flash by FPT :

fptw.exe -f biosregmod.bin -bios

Here is explaned the UEFIPatch use :

1. Use Drag'nDrop mode, just drag'n'drop the biosreg.bin (bios backup file) on it and it will give the patched one.

2. Use a Command Line window, just open it from biosreg.bin folder (go to FILE menu tab folder) by PowerShell and then run cmd.exe + Enter, write Uefipatch_039.exe biosreg.bin and it will give the patched one.

!!! IMPORTANT AND AWARE !!!

Look the log anyway and check that the patched offsets are like these :

parseBios: unaligned revision 2 volume
parseFile: non-empty pad-file contents will be destroyed after volume modifications
patch: replaced 2 bytes at offset 4FB60h 1727 -> 1127
patch: replaced 2 bytes at offset 4FB88h 1827 -> 1227
patch: replaced 2 bytes at offset 4FBB0h 1927 -> 1327
patch: replaced 2 bytes at offset 4FC00h 1B27 -> 1627
patch: replaced 18 bytes at offset 4FC18h 4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000
patch: replaced 2 bytes at offset 507F0h 1727 -> 1127
patch: replaced 2 bytes at offset 50810h 1827 -> 1227
patch: replaced 2 bytes at offset 50830h 1927 -> 1327
patch: replaced 2 bytes at offset 50870h 1B27 -> 1627
patch: replaced 18 bytes at offset 50880h 4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000
Image patched

These have to be in the same format !!!

1727 -> 1127
1827 -> 1227
1927 -> 1327
1B27 -> 1627
4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000
1727 -> 1127
1827 -> 1227
1927 -> 1327
1B27 -> 1627
4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000

That will means that patched is good :)

---