@BDMaster

I read through everything and tried again using RU and...




I did it, finally! Thank you so much for pointing me to the right places, so that I could learn what to do properly. All is done now! Will give Throttle stop a try again.

Massive thank you again BDMaster, this means a lot to me :)

@Squirrlz What throttlestop settings did you end up going with?

He didn't reply me after mod, so we have to ask him about ...
Glad to see You have done ;)

P.S. where you came from ? IT

@BDMaster I did reply, thank you so much! (check my reply right after you linked me the patch file!

@bason230 I am currently stable at -115mv on the cache and -130 on the core. -25 on iGPU, -15 on both system agent and iGPU unslice. I think the core might be able to go slightly further, and I might try jumping it a bit lower in 5mv increments but the cache will not go further than -115 without causing instability when the cores dip to low idle. There are some other settings I have Throttlestop using based on a thread I found on reddit that had a small TS guide for the 10875h, which is pretty close to this CPU so I used it as a baseline.

Simply having it throttle less from heat limits has made MMO game performance much smoother. I could maybe get temps a couple degrees (like maybe 1 or 2 max really) cooler if I push the core a bit further but I'm not sure it's necessary.

Oh another interesting side benefit is that my 32GB DDR3200 actually runs at the highest JEDEC, so I'm getting true 3200 speeds out of it now whereas without having the overclock features enabled in the new BIOS it was stuck at the 2933 JEDEC with no way to change it. So that's also pretty nice.

:) Yes my friend, true !!!, but I meant about the Trottlestop settings, as you were much happy ;)
Regards

@BDMaster Hey sorry for the late reply, but what were you asking me exactly when you wrote this?

> P.S. where you came from ? IT

Did you mean what my job is or where I come from? Either way, i work in IT and I live in France currently!

Yes man !!! nice , but pandemia is a pain for me too :(

Hi friend,
I have update the Patches list so we have FB03, FB07, FB08, FB09 and FD09 ... here all together

https://www.mediafire.com/file/r40947pc1...o+OLED.rar/file

Regards

Zitat von Squirrlz im Beitrag #319

---

There are some other settings I have Throttlestop using based on a thread I found on reddit that had a small TS guide for the 10875h, which is pretty close to this CPU so I used it as a baseline.

---

Hallo BDMaster,
can you mod bios for Aero 17 HDR XC as well?
What about the lock variable? Is it the same for all Gigabyte Aero? So always 0xBD?

Hi friend, we can try it, let me know which bios version you have or link me to your stock bios and i will can extract IFR to check all !
Let me know
Regards

Ok friend , these are equal as structure so FB03 has the same patch like Gigabyte Aero OLED.
Here I tested for Gigabyte Aero 17 HDR XC version FB03 :

parseFile: non-empty pad-file contents will be destroyed after volume modifications
patch: replaced 2 bytes at offset 503B0h 1727 -> 1127
patch: replaced 2 bytes at offset 503D0h 1827 -> 1227
patch: replaced 2 bytes at offset 503F0h 1927 -> 1327
patch: replaced 2 bytes at offset 50430h 1B27 -> 1627
patch: replaced 18 bytes at offset 50440h 4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000
patch: replaced 2 bytes at offset 509A0h 1727 -> 1127
patch: replaced 2 bytes at offset 509C8h 1827 -> 1227
patch: replaced 2 bytes at offset 509F0h 1927 -> 1327
patch: replaced 2 bytes at offset 50A40h 1B27 -> 1627
patch: replaced 18 bytes at offset 50A58h 4A10597B0DC0584187FFF04D6396A9151C27 -> 000000000000000000000000000000000000
Image patched

Here you go (your patch) :

https://www.mediafire.com/file/6ee86tbbr...C+FB03.rar/file

Thanks to CodeRush and Lost_N_BIOS !!!
Regards

I used this reddit thread as a starting point:

https://www.reddit.com/r/XMG_gg/comments...h_throttlestop/

Note that in the end, the best I was able to achieve in TS was a -82 core and -90 cache. Everything above that was causing BSOD when closing the laptop lid, I'm guessing because the core speeds probably dial down as low as they go when going into sleep states. There are probably changes you can make to sleep state settings or maybe setting the minimum core clock to something higher but I don't want to mess with too many settings because they start to get away from you after a while.

Zitat von Squirrlz im Beitrag #329

---

I used this reddit thread as a starting point:

https://www.reddit.com/r/XMG_gg/comments...h_throttlestop/

Note that in the end, the best I was able to achieve in TS was a -82 core and -90 cache. Everything above that was causing BSOD when closing the laptop lid, I'm guessing because the core speeds probably dial down as low as they go when going into sleep states. There are probably changes you can make to sleep state settings or maybe setting the minimum core clock to something higher but I don't want to mess with too many settings because they start to get away from you after a while.

---