Please put those in a zip, thanks. I only asked for a single page image, what is all those anyway?
On the setting you mentioned, thanks for the info, I didn't ask for that reason but it's good to know. This I assume all ties back to the vBIOS (in BIOS), since you said all that is fixed with the other smaller screen

I replied to your question what can i see on that page. So i made a couple photos of menues are avaliable there.

Yes it's sreen related as laptop switch to 15 model and limits gpu to max q version. To match 15 r4 heatsinks output.

Also one more thing to add. The Intel GPU is active in device menager but it will not output any image. I can connect monitor to laptop and only output card would be nvidia. Intel gpu will say error that there are no displays connected to it. And normally in alienware laptops intel gpu alway outputs image to the ports and to the built in display.

OK, thanks for clarifying, I didn't want to view the images like that so I didn't know what it was. All the graphics related things you can change in BIOS once I unlock for you.
Please keep in mind this is ES system, so you may not be able to switch/enable/disable one graphics over the other etc, usually this is locked into the other way around from what you mentioned though, so hard to guess what will be possible via changed settings.
Usually when this is attempted = black screen and only way to recover is blind BIOS reflash, programmer recovery, or actual full hard CMOS reset which most laptops also never do.

Ok! Thats fine for me. I know what you are talking about.

@code9523 - on the Advanced >> CPU Performance mode >> "Customization" << If you select that, can you then edit the otherwise grayed out options below (Ratio limit overrides and Power Limit 1/2)?

Yes i can all is adjustable.

Did you ever install this, or does it fail? https://www.dell.com/support/home/us/en/...?driverid=9dkj1
It may be too old, or for other systems in general, not sure? I came across it just not looking around, due to I noticed a hidden from you setting in your original advanced section (ELC FW Update). So looking for Dell ELC on google took me to this page
Below is a "model list", and there is an exe in the exploded package that has a SetModelKey.exe, but I think maybe this is just for the software (Still digging around in package to find the supposedly included ELC FW)


* Edit - yes, I see this setmodelkey thing is just for windows/software side -
readModelFromApplicationSettings- readModelFromRegistry - readModelFromRegistry64 - WriteModelToRegistry - writeModelToRegistry64

What is ELC? I have this option in bios can set it to enable or disable

Ahh, see my edit above. Sorry, I only noticed this because I thought while looking at your image this was hidden, now you say you can see, and I look again and I see you do have it visible
I am not sure what ELC is, this has something to do with the AlienFX lighting I think. I'm still looking in this file for the "ELC FW" The dell download page say it contains the FW too, so this is why I was looking at this.
Probably a waste of time, due to ES/Retail like everything else, but it caught my eye so I went digging for you

I assume, if enabled, this allows BIOS update to update ELC FW, disabled stops the BIOS update process from updating ELC FW (Thus keeping the on-board version, instead of whatever is in the BIOS update at that time)

The link in your post is broken. if you can fix it i can give it a try.

As i look in to alienfx controller specs it has built in memory so i think it's need a firmware in my case i think it has basic stock firmware and needs to be flashed to work.

That is Dell link, I just checked and it worked. Ohh, maybe the forum "re-direct" software is broken, it's been messing up for me all week now I think
Here is same URL, copy/paste

https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=9dkj1
 

I don't find any ELC FW in this package, Dell is full of crap There is some kind of FW at the end of the retail stock BIOS, unsure if this is for the ELC/AlienFX or if it's EC FW (255kb)
You can't rely on "Specs" from any OEM company, they give specs like they think dummies are reading, so can never be trusted what is said is actual or what is meant is what is said etc.
I'm sure it does have some FW, but if that is part of BIOS or EC, or by itself, we can never know without another sample or a retail sample to play with.

I have found something in alienware command center elc/firmware. Looks like firmware.
Files attachhed.

Everything looks like FW to you J/K.
Where was the exact path of this post-install, so I can find it on my extracted end. * Edit - did you name these files?

* Edit - 90KB file looks like FW, this is how normal EC FW looks, even mentions UU ITE which I often see in EC FW (ITE8291 controls LED's in keyboards, so this for sure part of that)
Hex file looks like controller or color settings, not FW, but likely used in conjunction with somehow.

Zitat von Lost_N_BIOS im Beitrag #88

---

Everything looks like FW to you J/K.
Where was the exact path of this post-install, so I can find it on my extracted end. * Edit - did you name these files?

* Edit - 90KB file looks like FW, this is how normal EC FW looks, even written with same UUITE Software

---

See my edits above. Thanks for the info, I was only asking about the names, since I didn't see any of that in my extractions of both programs within the double extracted exe.
In the command center extraction, I only got several language named folders and a SDK folder (plus all the stuff not in a folder). Maybe I didn't extract all the way, or with the right tools, I'm sure I could probably find the files via hex or other just didn't look far enough before you installed, thinking I already extracted it all

Yes, I assume software wouldn't work at all without EC FW or other FW on the board

* Edit - back to BIOS unlock here, have fun playing around