Forum - RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems

Win-Raid Forum (Drivers - Firmware - Modding) � OS related Topics � Windows 7/Vista/Server 2008 � [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems

Page 45 of 50 � Page 1 ... 40 41 42 43 44 45 46 47 48 49 50 Page �

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#661 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Fri Jul 09, 2021 6:52 pm

Zitat von Morpheas im Beitrag #660
Morpheas

Great! I'm glad everything worked out.

reply

#662 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Sat Jul 10, 2021 9:20 am

I see there is new driver UPDATE Some DRIVERS. 2021.07.05, will it solve the problem for Asus X470 series, windows 7 freezing after installation. This problem only for asus motherboads, on MSI B550 works well the previous drivers too.

Asrock X470, Ryzen 3300X, Patriot DDR4 4400, Geforce 2060, Windows 7 Prof X64,

reply

#663 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Sat Jul 10, 2021 9:50 am (Last edited: Sat Jul 10, 2021 10:24 am)

Zitat von Atom Ant im Beitrag #662
I see there is new driver UPDATE Some DRIVERS. 2021.07.05, will it solve the problem for Asus X470 series, windows 7 freezing after installation. This problem only for asus motherboads, on MSI B550 works well the previous drivers too.

Have you tried disabling the legacy USB support in the bios to see if it will fix this? It worked for the older MSI bios which froze at the Windows log on screen with these drivers so it's probably worth checking on your Asus board as well.

reply

#664 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Sat Jul 10, 2021 3:31 pm (Last edited: Sat Jul 10, 2021 3:40 pm)

@ryegrass @Atom Ant
For ASUS AM4 mainboards, if using win8 port driver from MDL, disabling the legacy USB support will still can not wor. Enable PBO funtion and disble Fmax seem can work. But for ryzen 1000/2000 cpu, they not support PBO. So, if your mainboards are ASUS AMD platform, I rencommed use the driver I post here, also if you still want to use win8 port driver, you can do this:USB DRIVER MOD

reply

#665 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Sun Jul 11, 2021 1:15 pm

Ok, thanks, but where is to possible to download that modded Asus driver? Because i can read �I posted here�, but i only find way to download non Asus drivers.

Asrock X470, Ryzen 3300X, Patriot DDR4 4400, Geforce 2060, Windows 7 Prof X64,

reply

#666 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Mon Jul 12, 2021 1:05 pm

Zitat von cityhopper im Beitrag #634
I used a driver package called Ryzen 3000 Serise_149C_Drivers_B3_Win7_SHA1.rar. I forgot the download address. This driver should also be made by Canonkong. You have to look at the AMD AGESA version of BIOS P2.6 first; if the version is appropriate, it is recommended to use Canonkong's latest B7 mod driver package. Keep CSM enabled and the status is UEFI（My hard drive partition is GPT）.

Do you happen to have the "Ryzen 3000 Serise_149C_Drivers_B3_Win7_SHA1.rar" file still? I can't seem to find it on here.

Or if anyone else reading this has this file, please let me know. Perhaps canonking might?

I have AMD AGESA version 1.0.0.4.

I've been busy with other things going on and I finally have the time to work on it some more. Windows 7 does indeed boot and work; I just need to get the drivers installed at this point before continuing further.

reply

#667 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Mon Jul 12, 2021 11:23 pm

Zitat von StormSpotterJohn im Beitrag #666
Zitat von cityhopper im Beitrag #634
I used a driver package called Ryzen 3000 Serise_149C_Drivers_B3_Win7_SHA1.rar. I forgot the download address. This driver should also be made by Canonkong. You have to look at the AMD AGESA version of BIOS P2.6 first; if the version is appropriate, it is recommended to use Canonkong's latest B7 mod driver package. Keep CSM enabled and the status is UEFI（My hard drive partition is GPT）.

Do you happen to have the "Ryzen 3000 Serise_149C_Drivers_B3_Win7_SHA1.rar" file still? I can't seem to find it on here.

Or if anyone else reading this has this file, please let me know. Perhaps canonking might?

I have AMD AGESA version 1.0.0.4.

I've been busy with other things going on and I finally have the time to work on it some more. Windows 7 does indeed boot and work; I just need to get the drivers installed at this point before continuing further.

Exactly which CPU, and motherboard do you have?
(MSI, Gigabyte appear to be OK, Asus possible, ASRock- no for USB 3 drivers)

reply

#668 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Tue Jul 13, 2021 7:00 am

Zitat von ryegrass im Beitrag #667

Exactly which CPU, and motherboard do you have?
(MSI, Gigabyte appear to be OK, Asus possible, ASRock- no for USB 3 drivers)

I have an ASRock x570 Steel Legend with an AMD Ryzen 5 3600.

I can't assume for sure, but I would guess that Mr. Nobody and cityhopper had working USB 3.0 ports. cityhopper told me how they were able to get Windows 7 up and running (they used the B3 drivers and worked it fine by the sound of it).

reply

#669 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Tue Jul 13, 2021 7:37 am (Last edited: Tue Jul 13, 2021 7:55 am)

Zitat von StormSpotterJohn im Beitrag #668
Zitat von ryegrass im Beitrag #667

Exactly which CPU, and motherboard do you have?
(MSI, Gigabyte appear to be OK, Asus possible, ASRock- no for USB 3 drivers)

I have an ASRock x570 Steel Legend with an AMD Ryzen 5 3600.

I can't assume for sure, but I would guess that Mr. Nobody and cityhopper had working USB 3.0 ports. cityhopper told me how they were able to get Windows 7 up and running (they used the B3 drivers and worked it fine by the sound of it).

Since I don't have an ASRock board, I'm just going by what canonkong said on page 1 of this thread "ASRock 500 series mainboards CAN NOT work on win7 and will A5/7E BSOD becaus of the BIOS". He's done extensive testing not only of the modified drivers here, but also of the Windows 8 USB driver mentioned earlier, so I trust his judgement.

I do however have copies of his earlier drivers but not as compressed .rar files. If you know which driver you need that was included in "Ryzen 3000 Serise_149C_Drivers_B3_Win7_SHA1.rar", I might have it. That way you can determine for yourself whether or not they will work on your ASRock x570 Steel Legend.

reply

#670 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Tue Jul 13, 2021 12:52 pm

Zitat von ryegrass im Beitrag #669

Since I don't have an ASRock board, I'm just going by what canonkong said on page 1 of this thread "ASRock 500 series mainboards CAN NOT work on win7 and will A5/7E BSOD becaus of the BIOS". He's done extensive testing not only of the modified drivers here, but also of the Windows 8 USB driver mentioned earlier, so I trust his judgement.

I do however have copies of his earlier drivers but not as compressed .rar files. If you know which driver you need that was included in "Ryzen 3000 Serise_149C_Drivers_B3_Win7_SHA1.rar", I might have it. That way you can determine for yourself whether or not they will work on your ASRock x570 Steel Legend.

According to other two users and from what I can say so far (with the help of Mr. Nobody and cityhopper), the ASRock x570 Steel Legend does work, although you have to a Matisse or an earlier Ryzen processor. @cityhopper (if you're reading this, thank you once again!) told me that you need to make sure that you have BIOS revision P2.60 (or earlier) or the setup will BSOD. This revision limits you to Matisse or earlier Ryzen processors.

You'll have to use a PS/2 mouse (or a PS/2 mouse and keyboard via a splitter cable) until the USB drivers are installed once you are in Windows.

I have Windows 7 up and running but without the drivers of course. Would you be willing to send the AMD, ASRock USB drivers and the Intel networking drivers that came with that package? Sadly I am not sure which USB driver it needs but I am willing to test each one until it works.

I believe there is a modded driver for the Intel I211AT ethernet controller for Windows 7 but I could be wrong. If not, I do have a Wi-Fi card I can always install.

reply

#671 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Tue Jul 13, 2021 6:44 pm (Last edited: Tue Jul 13, 2021 7:18 pm)

Zitat von StormSpotterJohn im Beitrag #670

Unfortunately, I have no idea which driver is the one which may work for ASRock nor was in the Ryzen 3000 Serise_149C_Drivers_B3_Win7_SHA1.rar package, as he never listed them that way in his downloads.

These are the earlier USB drivers that I have:

asmedia-usb3-v1.16.56.1
USB 3 Driver 2.0.0.48
USB 3 Driver 2.0.0.49 most Recent
USB 3 Driver 2.0.0.60
USB 3.2 Driver 2.0.0.68

And the two Intel LAN Drivers:

Intel WLAN (which contains an exe file)
Intel(R) I211 Gigabit Network Connection

Here's a link to an earlier package with the .68 drivers and I211 Network Driver https://yadi.sk/d/elVdi3YjM6M-7A Password: xiaofengmod

Disclaimer: make sure you have a full image of your Windows drive before you do anything, and that it can be properly restored, otherwise you could be left with a system that won�t boot.

reply

#672 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Thu Jul 15, 2021 1:22 pm (Last edited: Thu Jul 15, 2021 1:26 pm)

Zitat von StormSpotterJohn im Beitrag #666
Zitat von cityhopper im Beitrag #634
I used a driver package called Ryzen 3000 Serise_149C_Drivers_B3_Win7_SHA1.rar. I forgot the download address. This driver should also be made by Canonkong. You have to look at the AMD AGESA version of BIOS P2.6 first; if the version is appropriate, it is recommended to use Canonkong's latest B7 mod driver package. Keep CSM enabled and the status is UEFI（My hard drive partition is GPT）.

Do you happen to have the "Ryzen 3000 Serise_149C_Drivers_B3_Win7_SHA1.rar" file still? I can't seem to find it on here.

Or if anyone else reading this has this file, please let me know. Perhaps canonking might?

I have AMD AGESA version 1.0.0.4.

I've been busy with other things going on and I finally have the time to work on it some more. Windows 7 does indeed boot and work; I just need to get the drivers installed at this point before continuing further.

I found out my old hard drive and looked for the download address of Ryzen 3000 Serise_149C_Drivers_B3_Win7_8.1_SHA256.rar. Its link page is: https://pan.baidu.com/s/1eZDquNsH6CI_8aSxIGhOWg
Code:hdsc

There are basic driver files in the driver package. You need to let Win7 problematic devices (yellow exclamation mark) to find and install automatically one by one.

The network card and usb interface are used normally, but some new USB devices (individually) are inserted, and win7 cannot recognize them.

reply

#673 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Tue Jul 20, 2021 8:22 pm (Last edited: Tue Jul 20, 2021 8:28 pm)

Zitat von PatrickK im Beitrag #573

I am not shure what KB3033929, does, maybe one or more drivers need it to work properly, just try it out, don't be shy to make mistakes.

the KB3033929 update is a crucial update that adds SHA-2 (sha256) code signing support to Windows 7.
essential for modern drivers that are digitally signed with SHA-2 certificates.

however, KB3033929 is not needed anymore as it is superseded/replaced with the KB4474419 update.
Install KB4474419 update instead of the KB3033929 update.

Zitat von radek im Beitrag #572

So, KB3033929 should be integrated with install.wim (Windows 7 Pro),
NETWORK,NVME,SYSTEM DEVICES and USB DRIVER with boot.wim Index1 Microsoft Windows Setup (x64)

try integrating KB4474419 instead because KB4474419 replaces KB3033929

reply

#674 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Tue Jul 27, 2021 2:19 am

Thank you for the link, cityhopper! I can't seem to download the file, however. I'm having to use a translator and it does not seem to let me download it without an account for Baidu. It fails each time sadly.

Once again I've been busy with other things in real life (I meant to respond earlier) and I once again have some time to work on my new machine, haha. So close to having USB. I was able to get the Intel I211 ethernet to work with the package that ryeglass linked to me.

reply

#675 | RE: [Solution] Win7/8.1 Drivers for USB 3.0/3.1 Controllers of new AMD Chipset Systems datum

Tue Jul 27, 2021 7:05 am

Update: Everything is working with Windows 7 Ultimate on ASRock x570 Steel Legend... at the moment!!!

After some more testing and, I was able to get the 1.0.0.13 drivers to work from the latest driver pack. I have had zero issues so far; no BSODs, etc. Intel I211 Gigabit ethernet is working fine with no issues as well. If I run into any difficulties, I'll try another driver. Right now, all of my front USB ports work (2 USB 3.0 ports, 2 USB 2.0 ports) and all of the flash drives I have thrown at it seem to work fine so far. I did notice that one of my older USB 2.0 flash drives (an older 4GB SanDisk Cruzer from 2014 or so) only seems to work in only one of the USB 3.0 ports. Go figure I guess! I haven't tested all of the motherboard USB ports yet, but I know my USB switch for my keyboard and mouse. Other than that odd flash drive issue, everything appears to be stable at the moment.

A big thank you to @cityhopper, @Mr_Nobody, and @ryegrass for all of your help and support! I hope each of your replies and their respective messages help someone else out too!

If I have any issues, I'll be sure to ask about them if I can't figure it out myself. If everything works well for the next several days, I'll try to do a follow up. Have a great day and/or night!

reply

[GUIDE] How to get Win7 clean installed onto an NVMe SSD � � Installing i225-v ethernet drivers (W10 drivers) on windows 7?

Page 45 of 50 � Page 1 ... 40 41 42 43 44 45 46 47 48 49 50 Page �

Please enter a reason for warning.