Zitat von t105 im Beitrag #540

---

I am using MSI B550 Tomahawk with Ryzen 5600X and a SATA HDD (No nvme SSD is installed).
The AGESA version is 1.2.0.2.
I have tried to inject all the drivers in the folder "System Driver" and "USB Controller" to both boot.wim and install.wim using dism command.
However, when I tried to inject the drivers to boot.wim I got the following message

C:\drivers\USB Controller\AMD_1.0.5.3_USB_MOD_Win7\amdhub31.inf: Error - An error occurred. The driver package could not be installed.
C:\drivers\USB Controller\AMD_1.0.5.3_USB_MOD_Win7\amdxhc31.inf: Error - An error occurred. The driver package could not be installed.

While all the drivers can be successfully injected to install.wim without any error.

I just ignore this and tried to boot with the usb stick created. The Windows installation page is successfully loaded but the USB mouse is not working as expected. When I try to use a PS/2 mouse to proceed, it requests me to add necessary driver for CD/DVD. I tried to search for all the folder provided but no luck. I tried to install AMD_1.0.5.3_USB_MOD_Win7 again but it fails again.

May I know what should I do? Thanks in advance!

---

Hy @johnnygreat, @User32,@noctua2005, @Workstation and every other reader of this comment.
I know this is a support forum for problems of others, but would one or more of you guys be so kind to install my Windows 7 SP2.11 beta ISO with this native xHCI support on their pc on a third, or another, partition ? I ask this because I want to know if that unofficial native xHCI support that I try to integrate in my entire, future SP2.11 ISO release, which I currently work on, works on your younger systems, my time money is limited of course, my will not really, in that regard.

Don't use chrome; doesn't support FTP anymore at all.
In the folder one step up you can find my mobile slipstreaming folder, with those files in there everyone can create an ISO with custom drivers and/or updates, created all by myself, I think this is helpful.

ftp://fudi.internet-box.ch/NT%206.1/SP2.11/
Username: nutzer
Password: 132

I wonder if I can enable Resizable BAR/AMD Smart Access Memory with Win7 if I use manatails his UEFI hack?

I created and installed iso using your file, but I cannot activate aero.Freezes when trying to enable
how can enable aero?

@datokonoko Are you referring to me ?

yes

@datokonoko I assume you referr to me again.
Please use that function for adressing usernames, otherwise you annoy me right away.
I don't know your hardware at all, but a first suggestion ist to ask you if you installed the graphics driver correctly.

@PatrickK I'm sorry for the inconvenience.
Is this the right way?
I think the graphics driver is installed correctly.
Hardware is Ryzen9 x5900 Asus Rog Crosshair iii formula

@datokonoko Yes, that is the correct way, good to see this.
Ok, but what is graphic card are you using ? (The most important information your your case here).
Did you write a wrong model there? AFAIK this Asus Rog Crosshair iii formula is an AM3 board, and I am not able to find an official support site like normally, which irritates me.
Maybe you mean a ROG Crosshair VIII Formula ?

@PatrickK
oh sorry
The ROG Crosshair VIII Formula is correct.
GPU is RTX 2080 Super

@datokonoko Ok, these are the most information about your PC that I need to give you any assistance.
I don't have any experience with hardware like this, what I can say is to recommend flash the newest BIOS, se the settings to CMS enabled and legacy boot enabled and install the newest driver for Windows 7 for your graphics card from today and remove your current driver with the Display Driver Uninstaller. And don't install any dumb software like Avira, Driver Booster or similar. (Even though Driver Booster can be actually useful, I don't like it, always use your browser, the device manager and your brain to get drivers and software working).

Hi,

I was able to successfully install Windows 7 using the drivers from this post on the following motherboard:

PRIME B450M GAMING BR

All drivers have been recognized in the device manager.

However I have blue screen only when I try to start with my video card connected in the pci slot (AMD RX580)

If I turn on the PC without the video card, using only the processor's apu the system starts normally ...

What can it be ? The blue screen happens right after the Windows boot flag, apparently with the error code:

0X000000A5

Bios Version: 2807
AMD AM4 AGESA V2 PI 1.2.0.0

If anyone can help me I will be grateful

EDIT: to be able to format and install the edited windows with the drivers here from the post, I had to boot my pendrive with the video card outside my pc

With the video card connected it was resulting in a blue screen

@vinisilv4 have you installed the latest Chipset drivers from AMD?
you can find them here
https://www.amd.com/en/support/chipsets/amd-socket-am4/b450

the graphics card drivers are found here
https://www.amd.com/en/support/graphics/...s/radeon-rx-580

i had a similar board (X470 and A320) and it was working with the internal APU (Bristol Ridge) and RX560 on Windows 7.

@PatrickK tried your Windows 7 SP2.11 beta and it came in handy as was trying to upgrade from 970 Evo Plus (on which i had Windows 7 already installed) to a 980 Pro NVME (and cloning back with Acronis True Image).
The Cloning was succesful but the image would not boot on the newer NVME, and i found out that the 980 Pro apparently has another Controller embedded, which would need another NVME Driver (the Generic Microsoft ones that come with Windows 10 it seems)
With your ISO i was able to install Windows 7 fresh onto the 980 Pro NVME disk , and after going back to a BIOS from 2019, was getting full PciE 4.0 speeds on a B450 Board (nice!);
problem arose then, with your image, as it would not let me install my printer driver (EPSON ET-4750), it would complain of missing SPOOLER Service, tried several times; after some time it was too much of a hassle and i went back to the 970 Evo Plus stable Windows 7 Setup;
Hopefully in the future soon i might be able to upgrade to a System with faster PCiE 4.0 or PciE 5.0 NVME, the speed convinced me.

@riku Sounds great, thanks for sharing your experiences with us, this gives me useful information for my developing process.
You should be able to just re-enable the spooler sevice, use the Windows start menu and its options or just serach for 'dienste'.
I like to disable everything I don't need for myself, I really like it to see Windows 7 using less than 1GB of RAM, even on 64-bit an 8GB of RAM, but in the final ISOs this service will be started automatically, to avoid problems like you had.