@Lost_N_BIOS
I suggest we could establish a zone collecting bioses of mobos which cannot be downloaded in official website,or cannot be dumped by official bios file.
That could save mobos which bios is broken and could be use for modding or transplanting.

And we could dumped the bioses by spi programmer or afu/fpt.

Remember,we need the whole bios which size is equal to the bios chip in mobo.

Maybe we should wait until you have the Ivy CPU, just in case it's working in some manner but only with Ivy. I thought you already had Ivy.

@gloobox - that would be good, if someone had time to keep track of all that. Even when I get dumps from people I would never have time, remember etc, to add to the thread - I just keep copy in case I need, so if you ever need ask me too.
I finish mod BIOS all the time for people, and never have time, or remember, to go add a copy to the finish mod BIOS area

Hello, i have a t3610 with corrupt bios. The Machine do not boot. I want to program the two bios chips. SOIC8 and SOIC16 chips are on the board. What dump should i use and how do i split the dump?

Did you guys ever figure this out? In the same boat.

Is there any progress? I am highly interested in the mod since V2 Cpus are getting cheaper and T3610 Mainboards are really expensive.

@mikehue - Sorry I missed your post until now! Please dump both chips and send to me. Also, tell me the chip ID for each, and what software/version you make the dumps with.

@amunoz951 - I don't think so, but am not 100% sure. Do you have flash programmer?
@stefan0815 - Same as above

@gloobox - do you know where, or if, we ever were able to crossflash T3600 to T3610? I want to think for sure we did that somewhere, maybe even you did directly too, but I can't find the thread.
I need to find info about what we did, how etc - So I can advise two threads below, and users above
Dell t3600 bios upgrade to t3610 for Ivy Bridge
[REQUEST] Dell T3610 to use multiple NVME on Asus Hyper m.2 x16 (2)

@Lost_N_BIOS -I've done it myself. The dell machine is running again but has been replaced by an HP dl 360 Server.

@Lost_N_BIOS
I remember it!
But it's about T5600 crossflashing to T5610,and the consequence was kind of reluctant that the T5600 could launch with the IVB after flashing but stuck in the DELL LOGO.

Let's revive this topic! I have an T3600 and I want to run ivybridge cpu in it. So what i've tried:

1. In Flash Image Tool v8 I opened the T3610 dump and changed the GbE Region with the T3600's. After that the computer not boots.
2. In UBU tool (T3600 dump) I updated the cpu microcode to sandybridge & ivybridge ep. The computer starts, but after dell logo it halts with cpu microcode update fault. I think it needs ME8.
3. I flashed Lost_N_BIOS's modded bios for lowrck, but the computer not boot at all.

Here is my dump, if anyone wants help me, or just for fun :)

[[File:T3600_peti1000.bin.zip]]