UPDATE:

managed to get it to work!

not exactly sure why but this was what I had to do, installed a windows 7 ultimate sp1 iso all in one version with rufus to my 8gb usb key with ntfs/MBR format instead of GPT/UEFI,

then I set my bios to CSM/Legacy instead of UEFI, and the next time the windows 7 install asked for usb driver, I unchecked "hide drivers that are incompatible with my devices" (something like this) and selected the 32-bit usb 3.1 extensible driver from @canonkong , for some weird reason the 64bit ones wouldnt show up even though it is a 64bit version of win7, and it worked!

it loaded the drivers and setup for the first time did continue and successfully install ! :)

however, after win7 was installed usb-mouse and usb-keyboard did not work immediately, but the usb key with win7 was recognized and I was able to browse to it with my ps2keyboard and run canonkongs exe-installer for the 64bit drivers (saved all drivers I needed including this in a folder on the usb)

and now everything works fine :)


so happy now :D



Only question now is, are there any chipset z390 drivers for windows7 available or should I just ignore the yellow exclamation marks in device manager? disk speeds and fps tests in games seem to be fine:

https://i.imgur.com/NJzFL44.png

https://i.imgur.com/ZXDXheT.png


also sound, graphics, network all work fine, it was scary to try to install everything with only ps2 keyboard connected on the first boot, but all went good :)


thank you @canonkong for the drivers and thank you to @Fernando for this amazing forum, you are the best!

@alexander86 Other drivers can download >here<.

EDIT by Fernando: Link corrected

Also by the way, i'm afraid if I ever have to reinstall windows 7 for some reason I will probably, with my bad luck, run into problems or forget exactly how I managed to install it this time :D

so I request from someone, if possible, a win7 ultimate sp1 english iso with the drivers from @canonkong integrated into the image for a smooth and easy install if possible, I have a license for both win7 and win10 so that is no problem but, if I ever have to reinstall windows 7 i'm scared that I will run into problems, and have to install win10 and then win7 again afterwards and so on,

so if anyone has the time or kindness to create a win7 sp1 ultimate English iso with these drivers integrated / slipstreamed with DISM or similar for an easy boot I would be forever grateful, cheers and have a nice day everyone !


PS i'm sure other users could benefit greatly from having this iso as a easy backup for reinstallation of windows7 on z390, etc. thanks again !

@canonkong
Thank you so much for your pipes. Millions of users are grateful.

MY HARDWARE ID IS

PCI\VEN_8086&DEV_A36D&SUBSYS_085C1028&REV_10
PCI\VEN_8086&DEV_A36D&SUBSYS_085C1028
PCI\VEN_8086&DEV_A36D&CC_0C0330
PCI\VEN_8086&DEV_A36D&CC_0C03
PCI\VEN_8086&DEV_A36D&SUBSYS_085C1028&REV_10\3&11583659&0&A0

I INTEGRATED THE DRIVERS TO WIN7 SP1 64 BIT BUT NO KEYBOARD AND MOUSE WORKING DURING STARTUP THIS IS DELL OPTIPLEX 3060 WITH NO LEGACY SUPPORT

MY HARDWARE ID IS

PCI\VEN_8086&DEV_A36D&SUBSYS_085C1028&REV_10
PCI\VEN_8086&DEV_A36D&SUBSYS_085C1028
PCI\VEN_8086&DEV_A36D&CC_0C0330
PCI\VEN_8086&DEV_A36D&CC_0C03

I CANNOT FIND THE SOLUTION ALL DRIVERS ARE INTEGRATED TO WIN7 SP1 64 BIT WITH UEFI SUPPORT NO LEGACY OPTION. BUT LEGACY OPTION IS FOR EXTERNAL DEVICE ONLY

PLEASE HELPME MY DEAR FRIEND

MY HARDWARE ID IS

PCI\VEN_8086&DEV_A36D&SUBSYS_085C1028&REV_10
PCI\VEN_8086&DEV_A36D&SUBSYS_085C1028
PCI\VEN_8086&DEV_A36D&CC_0C0330
PCI\VEN_8086&DEV_A36D&CC_0C03

sorry my dear

Hello,
i got a asus rog Maximus XI hero z390 Board.

I tryed canonkong´s drivers, and the version of Fernando to place USB drivers into my Window 7 Ultimate Iso with NTlite.
The Intel 3.1 eXtensible-Hostcontroller 1.10 found drivers;
generic usb hub and USB-Root-Hub (xHCI) are still missing. all usb port´s not working. I cant pass the Windows 7 installation screen.

any solutions?
thank you

Zitat von Fernando im Beitrag #77

---

@pracc:
AFAIK only WHQL certified storage and USB drivers can be successfully inserted into a Win7 ISO file.

---

@pracc
You can use “Dism++” to make a install image.

I guess the reason why the 32 bit drivers have to be loaded (f6) during windows installation is that the windows installer is a 32 bit system, regardless of what it installs (32 or 64 bit windows).

Then if you install 64 bit windows, after first boot you will have to add the 64 bit drivers.