@IntiMD yeah, was thinking of that, i also have the cd that came with the motherboard, so i assume those wont be a problem at all.
One thing started happening, after i rebooted couple of times, untill i go into F8 menu and start with disabled driver signing it goes into windows automatic repair everytime, which is odd.... did i do something wrong ?!

The culprit of unsigned detection of v5.0.3.43 and v5.0.4.44 drivers is missing Microsoft Windows Hardware Compatibility Publisher signature. Fernando has provided in this post drivers v5.0.3.42 which have MS WHCP sig. They are detected as signed on the hardware which detects v5.0.3.43 and v5.0.4.44 as unsigned.

I will try those out when i have the time again :)

P.S: tried integrating those you mention @winyl and this is the error i got in NTlite: with the error: cant find those .inf files.

nvm i got it to work, installed the certificates and it was all good ! thank you !

Did you get it to work in ntlite? @valcugen

Please where is the password for the first zip file. I'm having trouble 4 weeks searching ofr a usb driver for my damn B260 pro board

I found the password and it worked, but I need more a driver called "Management Engine interface' for windows 7. If you find it please help because it was the only file missing after updating the USB 3.0. Thanks

@madnikos no, it doesnt matter, you just have to install your drivers in test mode and you're good to go after you reboot.

@canonkong:

Thank you for providing those magic drivers, using your digitally signed generic USB 3.0/3.1 drivers, i could install windows 7pro-64 on my Optiplex 3060/I5-8th.

I have registred in Win-Raid to thank you for your efforts and share with others my win7pro64-usb3intergated, If it's allowed.

Regards.

@aladinsinbad
You can share it.

@sarath


what you need to install win7 on your Optitex3060 8th,


Windows 7 ISO


Ntlite

https://www.ntlite.com/download/


usb 3 drivers, provided par canonkong

No Signed modified intel IO/USB3.1 driver 32/64bit:https://yadi.sk/d/ISNYv5jV9dX5zQ

SHA256 Signed modified intel IO/USB3.1 driver 32/64bit:https://yadi.sk/d/30Ku1rUm-XdRvA


Tutoriel, provided by Fernando


[Guide] Integration of drivers into a Win7/8/10 image

@canonkong

windows 7-64BIT with USB 3.X integreted drivers

https://mega.nz/file/ErgwkQxK#Hx26DQu_n2jrfcC64AQ7JC7Vykph39PDV7EJSPlmAyM

For those who can't find drivers for wifi - Intel® Wireless-AC 9560 officially doesn't work on Windows lover version 10.
Just buy WiFi module like Intel 8265 ( 8000 series work with Win7 ) and replace it.

Zitat von fdamours im Beitrag #22

---

Hi, I tried your driver this morning on a C246 chipset and it worked perfectly. The C246 is the workstation version of the Z390. I also have a 9th gen CPU.

With a modified ISO burned on a DVD, I installed Win7 on the NVMe hard drive, but none of the USB ports worked. So this morning, with remote desktop connection, I installed the driver and the USB ports became available. I didn't tried a lot of things, but the mouse is working, and I reached 90Mb/s with a USB3 stick. The files copied were not corrupted. So at least for my use, your driver will do the job.

Motherboard ; GIGABYTE C246M-WU4
CPU : i5-9600K

Thanks a lot

---

Zitat von winyl im Beitrag #197

---

The culprit of unsigned detection of v5.0.3.43 and v5.0.4.44 drivers is missing Microsoft Windows Hardware Compatibility Publisher signature. Fernando has provided in this post drivers v5.0.3.42 which have MS WHCP sig. They are detected as signed on the hardware which detects v5.0.3.43 and v5.0.4.44 as unsigned.

---

Hi

I'm new to the forum and facing problem while installing windows 7 on my new PC build as:

MoBo: Gigabyte Z390M
CPU: i5-9600K
SSD: WD 500GB M.2

I, somehow managed to get past the language selection dialog box cuz of PS/2 mouse (none of USB ports working), but after that I get an error (even after adding drivers through DISM) stating:

"A required CD/DVD is needed to install the missing device drivers"

On the "Browse", I only get to see the "X" partition and no other partition is shown, meanwhile no usb ports are working (was thinking to plug usb stick with the drivers to solve).

Additionally, I tried to install windows 7 on an external HDD, but on booting the OS, Windows 7 freezes with a BSoD (0x000007b) immediately after that logo screen.

Where am I going wrong....Please guide