Forum - RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!)

#16 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Thu Jun 27, 2019 10:25 pm (Last edited: Thu Jun 27, 2019 10:28 pm)

Working on it, would love a modded BIOS as long it doesn't brick my Toughbook.

How do I make a FPT BIOS region dump?

User32 has attached files to this post

DCIM.zip

reply

#17 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 7:16 am

FPT Dump is same as you did before at post #8 , only now it will have your unlocks applied already >> FPTw.exe -bios -d biosreg.bin

I will only send you edits I think would be safe, if I think it's a risky edit I wont send, unless/until you purchase cheap flash programmer setup (CH341A = SOIC8 test clip cable, less than $7 total for both shipped on ebay, let me know if you need linked examples)
And yes, I think I can unlock all BIOS for you, everything hidden in advanced and the chipset tab too, also even the "Debug Tab" which is really the usual hidden advanced renamed (Actual debug folder cannot be enabled ever on AMI BIOS)

Or if you want, I can simply make that one ATA Controller Speed setting visible for you?

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#18 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 11:42 am (Last edited: Fri Jun 28, 2019 6:52 pm)

Unlock everything that won't brick my laptop.

EDIT: I would especially love to know if there is a way to select RAM speed as it's (artifically?!) locked at 1333, probably because XMP isn't enabled by default.

User32 has attached files to this post

biosreg.zip

reply

#19 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 9:43 pm (Last edited: Fri Jun 28, 2019 9:44 pm)

Yes, it's limited by a setting, one "Default Profile" is default instead of Custom or XMP, and there is actual Freq Limiter set too (at 1333)

DIMM profile, VarStoreInfo (VarOffset/VarName): 0x20C, VarStore: 0x1, QuestionId: 0x432, Size: 1, Min: 0x0, Max 0x0, Step: 0x0 {05 A6 6B 04 6C 04 32 04 01 00 0C 02 14 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x58F58 One Of Option: Default DIMM profile, Value (8 bit): 0x0 (default) {09 0E 6D 04 30 00 00 00 00 00 00 00 00 00}
0x58F66 One Of Option: Custom Profile, Value (8 bit): 0x1 {09 0E 70 04 00 00 01 00 00 00 00 00 00 00}
0x58F74 One Of Option: XMP Profile 1, Value (8 bit): 0x2 {09 0E 6E 04 00 00 02 00 00 00 00 00 00 00}
0x58F82 One Of Option: XMP Profile 2, Value (8 bit): 0x3 {09 0E 6F 04 00 00 03 00 00 00 00 00 00 00}
0x58F90 End One Of {29 02}
0x58F92 One Of: DDR Selection, VarStoreInfo (VarOffset/VarName): 0x207, VarStore: 0x1, QuestionId: 0x1E7, Size: 1, Min: 0x0, Max 0x0, Step: 0x0 {05 A6 77 04 78 04 E7 01 01 00 07 02 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x58FB8 One Of Option: DDR3, Value (8 bit): 0x0 {09 0E 79 04 00 00 00 00 00 00 00 00 00 00}
0x58FC6 One Of Option: DDR3L, Value (8 bit): 0x1 {09 0E 7A 04 00 00 01 00 00 00 00 00 00 00}
0x58FD4 One Of Option: Auto, Value (8 bit): 0x2 (default) {09 0E 26 03 30 00 02 00 00 00 00 00 00 00}
0x58FE2 End One Of {29 02}
0x58FE4 Numeric: DDR Reset Wait Time, VarStoreInfo (VarOffset/VarName): 0x208, VarStore: 0x1, QuestionId: 0x1E8, Size: 4, Min: 0x14, Max 0x2DC6C0, Step: 0x1 {07 A6 7B 04 7C 04 E8 01 01 00 08 02 10 12 14 00 00 00 C0 C6 2D 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x5900A Default: DefaultId: 0x0, Value (32 bit): 0x1E8480 {5B 0D 00 00 02 80 84 1E 00 00 00 00 00}
0x59017 One Of Option: DDR Reset Wait Time, Value (32 bit): 0x1E8480 (default MFG) {09 0E 7B 04 20 02 80 84 1E 00 00 00 00 00}
0x59025 End {29 02}
0x59027 One Of: Memory Frequency Limiter, VarStoreInfo (VarOffset/VarName): 0x204, VarStore: 0x1, QuestionId: 0x1E9, Size: 1, Min: 0x0, Max 0x0, Step: 0x0 {05 A6 7D 04 7E 04 E9 01 01 00 04 02 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x5904D One Of Option: Auto, Value (8 bit): 0x0 {09 0E 26 03 00 00 00 00 00 00 00 00 00 00}
0x5905B One Of Option: 1067, Value (8 bit): 0x1 {09 0E 7F 04 00 00 01 00 00 00 00 00 00 00}
0x59069 One Of Option: 1333, Value (8 bit): 0x2 (default) {09 0E 80 04 30 00 02 00 00 00 00 00 00 00}
0x59077 One Of Option: 1600, Value (8 bit): 0x3 {09 0E 81 04 00 00 03 00 00 00 00 00 00 00}
0x59085 One Of Option: 1867, Value (8 bit): 0x4 {09 0E 82 04 00 00 04 00 00 00 00 00 00 00}
0x59093 End One Of {29 02}
0x59095 One Of: Memory Frequency Limiter, VarStoreInfo (VarOffset/VarName): 0x205, VarStore: 0x1, QuestionId: 0x1EA, Size: 2, Min: 0x0, Max 0x0, Step: 0x0 {05 A6 7D 04 7E 04 EA 01 01 00 05 02 10 11 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x590BB One Of Option: 1067, Value (16 bit): 0x42B {09 0E 7F 04 00 01 2B 04 00 00 00 00 00 00}
0x590C9 One Of Option: 1333, Value (16 bit): 0x535 (default) {09 0E 80 04 30 01 35 05 00 00 00 00 00 00}
0x590D7 One Of Option: 1600, Value (16 bit): 0x640 {09 0E 81 04 00 01 40 06 00 00 00 00 00 00}
0x590E5 One Of Option: 1867, Value (16 bit): 0x74B {09 0E 82 04 00 01 4B 07 00 00 00 00 00 00}
0x590F3 One Of Option: 2133, Value (16 bit): 0x855 {09 0E 83 04 00 01 55 08 00 00 00 00 00 00}
0x59101 One Of Option: 2400, Value (16 bit): 0x960 {09 0E 84 04 00 01 60 09 00 00 00 00 00 00}
0x5910F One Of Option: 2667, Value (16 bit): 0xA75 {09 0E 85 04 00 01 75 0A 00 00 00 00 00 00}
0x5911D End One Of {29 02}
0x5911F One Of: ECC Support, VarStoreInfo (VarOffset/VarName): 0x1FB, VarStore: 0x1, QuestionId: 0x1EB, Size: 1, Min: 0x0, Max 0x0, Step: 0x0 {05 A6 97 04 98 04 EB 01 01 00 FB 01 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0x59145 One Of Option: Disabled, Value (8 bit): 0x0 {09 0E 29 03 00 00 00 00 00 00 00 00 00 00}
0x59153 One Of Option: Enabled, Value (8 bit): 0x1 (default) {09 0E 28 03 30 00 01 00 00 00 00 00 00 00}
0x59161 End One Of {29 02}

I will work on BIOS soon and get back to you with first quick test before I start unlocking it all

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#20 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 9:44 pm (Last edited: Fri Jun 28, 2019 9:44 pm)

Can I enable XMP with grub?

reply

#21 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 9:46 pm (Last edited: Fri Jun 28, 2019 9:48 pm)

Yes,
setup_var 0x20C 0x2 >>> XMP1
setup_var 0x20C 0x3 >>> XMP2
setup_var 0x20C 0x0 >>> Put back to default

For that to work properly, you may need to also change the limiter option, I'm not sure. What is your XMP speed?

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#22 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 9:49 pm (Last edited: Fri Jun 28, 2019 9:52 pm)

F yeah it's working, thanks again!

GPU-Z screen:
http://gpuz.techpowerup.com/19/06/28/ng6.png

reply

#23 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 9:53 pm (Last edited: Fri Jun 28, 2019 9:54 pm)

So what speed did you get? Why are you showing GPU-z image?

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#24 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 9:54 pm

1866, as I have Kingston HyperX 1866 modules in my 19.

reply

#25 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 9:55 pm (Last edited: Fri Jun 28, 2019 9:55 pm)

See my edit above, check memory speed with CPU-z memory tab (not SPD tab)
Ohh, so that shows/uses same speed as main memory?

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#26 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 9:56 pm

Also says 933 MHz, and since it's DDR it translates to 1866.

reply

#27 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 9:57 pm

Great! I assume the main timings also got set properly too then, correct?

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#28 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 9:58 pm (Last edited: Fri Jun 28, 2019 9:59 pm)

1866 CL11, which i'm quite sure is correct.

EDIT: HWiNFO says 1866 11-11-11-32

reply

#29 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 10:03 pm

Show me CPU-z SPD tab, that is very loose timing for 1866 speed, doesn't sound like it would be an XMP profile speed (especially for Hyper X)

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#30 | RE: [REQUEST] Panasonic Toughbook CF-19 Mk7 unlocking SATA3? (and advanced menu?!) datum

Fri Jun 28, 2019 10:04 pm

https://i.imgur.com/pSnztmC.png

reply

Please enter a reason for warning.