Followed the forum for some time, but now stuck myself.
We have several Supermicro X8DT3 Motherboards (5520 Chipset) with ICH10R SATA Controllers which I hope to upgrade to Server 2012 R2, but I cannot get any driver for the ICH10R Controller to work.
Supermicro have told me they don't think there is a supported 2012 R2 driver for this chipset\ICH10R
Does anyone know if there is a driver that will work or have these boards come to the end of their production lives?
welcome at Win-RAID Forum! Questions: 1. Which SATA mode did you choose or do you want to choose? 2. Did you already try the Intel RST driver v11.2.0.1006 WHQL?
Regards Fernando
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Zitat von NoNameNone im Beitrag #31) I am using it in RAID mode (RAID1)
Since the Intel SATA Controller is running in RAID mode, you should be able to get any Intel RST(e) driver of the v12 and v13 series installed (e.g. v13.1.0.1058 WHQL).
Zitat2) Yes, but I get the following: your PC ran into a problem and needs to restart (and it then reboots)
Did you install the driver from within the already running OS or did you load it at the beginning of the OS nstallation?
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Zitat von NoNameNone im Beitrag #52) I am trying to install during O\S installation
Had the OS Setup already detected the RAID array before you loaded the Intel RST driver v11.2.0.1006?
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Zitat von NoNameNone im Beitrag #7No, no controllers\drives are detected
So loading the Intel RST driver v11.2.0.1006 lets the OS Setup detect the RAID device and its volumes, but the system crashes at first reboot?
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Zitat von NoNameNone im Beitrag #9No, the system crashes once the driver is loaded. The "Knight Rider" type graphic go across the screen for about 60 seconds and then after that straight into the reboot error page. Error is displayed momentarily, but seems to be the "IRQ not less or equal"
This indicates, that the issue has not been caused by the special Intel RST driver version. What about the memory and PSU integrity and which Intel RAID ROM version is within the BIOS?
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Zitat von NoNameNone im Beitrag #11No issues running Server 2008 R2, so memory\PSU integrity seems fine - also we have multiple servers of this spec to try as well.
With which SATA mode are the Storage Controllers running and which driver do they currently use?
ZitatMotherboard running latest BIOS, and the Intel ROM version is 11.1.0.1413
This version matches the Intel RST RAID driver v11.2.0.1006 nearly as good as the v11.2.0.1527 OROM.
I still believe, that the Intel RST RAID driver v11.2.0.1006 WHQL would be the best choice for Intel RAID systems with an ICH10R Soutbridge. The BSOD after trying to load the driver at the beginning of the OS installation does not mean, that it will not work with the system.
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Print view
Sat Aug 16, 2014 10:48 am
reply
Win-Raid Forum (Drivers - Firmware - Modding)
»
Important Drivers (AHCI/RAID, NVMe, USB etc.)
»
Specific: Intel AHCI/RAID Drivers
»
ICH10R Issue
