In the afternoon I tried to replace it with the ME firmware you provided and successfully started the computer. I updated the computer ME firmware to 12.0.40.1433, but my sound card OED still exclamation mark, it seems that the sound card OED failure caused by the intel me version is not too low. In addition, my BIOS has limited my memory so that it does not work properly on 2666. The computer limits it to work at 2400. Is there a way to unlock the BIOS and make it work on 2666? This is the BIOS I am updating the ME to the latest version.zbook17G5 DUMP bios

delete

Ok, I will do what you say. The sound card driver I have installed the latest, the problem is in the intel oed bus driver. I used the earlier 2017 oed driver although there is a yellow exclamation point, but it can make a sound. If I install the 2018 HP official website to provide the latest, there is no sound in the yellow exclamation point computer. I researched the BIOS and updated intel me to solve this problem. This problem has bothered me for two months, which makes me very upset. What has been modified in the BIOS you provided to me? Can the memory work on the 2666 frequency? Or according to what you said, you have merged the BIOS part of the official website Q71 with the intel me part? thank you very much for your help.

2019.7.31

Can anyone help me unlock the BIOS cpu advanced option (overclocking option) or help me modify the bios CPU power consumption to unlock to 65W TDP long time 90W TDP, the default factory default limit of the notebook, limit his TDP leads to poor performance, I need your Thank you very much.@Lost_N_BIOS

https://mega.nz/#!VTQQiQAT!i_KGwV7thjoz3...kRWE6meR6QbQQNE DUMP BIOS

Hello, can you help me make the Q80BIOS provided by the official website into a DUMP BIOS? I directly put the BIOS provided by HP into the ROM can not start, with winhex I do not know how to modify, Q80 I can upgrade myself, but the official website intel me 12.0.39.1431 I can not update successfully. The forum did not provide 12.0.39.1431 ME firmware, I have no way to use FIT for synthesis.

Also, how can I back up the ME or BIOS in the official website BIOS? Do you still need to use WINHEX to copy backups with the FPTW64.EXE command? thank you very much.

HP Q80 bios ：http://h30318.www3.hp.com/pub/softpaq/sp98501-99000/sp98817.exe

This is the BIOS that you originally helped me to synthesize, Q70 ME1433 https://mega.nz/#!VTQQiQAT!i_KGwV7thjoz3...QNE@plutomaniac



2019.8.29 我已经解决，非常感谢论坛的知识。