Hi,

@Lost_N_Bios

Assuming you have this code snippet:

End {29 02}
0x78EE0 		One Of: 5G LAN Card, VarStoreInfo (VarOffset/VarName): 0x11BF, VarStore: 0x1, QuestionId: 0xDC2, Size: 1, Min: 0x0, Max 0x1, Step: 0x0 {05 91 90 22 91 22 C2 0D 01 00 BF 11 10 10 00 01 00}
0x78EF1 			One Of Option: Disabled, Value (8 bit): 0x0 {09 07 0B 13 00 00 00}
0x78EF8 			One Of Option: Enabled, Value (8 bit): 0x1 (default) {09 07 30 18 10 00 01}
0x78EFF 		End One Of {29 02}
0x78F01 		Subtitle: Statement.Prompt: , Flags: 0x0 {02 87 02 00 00 00 00}
0x78F08 		End {29 02}
0x78F0A 		Suppress If {0A 82}
0x78F0C 			QuestionId: 0xDC2 equals value 0x0 {12 06 C2 0D 00 00}
0x78F12 			One Of: 5G LAN PXE Option ROM, VarStoreInfo (VarOffset/VarName): 0x11C0, VarStore: 0x1, QuestionId: 0xDC3, Size: 1, Min: 0x0, Max 0x1, Step: 0x0 {05 91 92 22 93 22 C3 0D 01 00 C0 11 10 10 00 01 00}
0x78F23 				One Of Option: Disabled, Value (8 bit): 0x0 (default) {09 07 0B 13 10 00 00}
0x78F2A 				One Of Option: Enabled, Value (8 bit): 0x1 {09 07 30 18 00 00 01}
0x78F31 			End One Of {29 02}
0x78F33 		End If {29 02}
0x78F35 		One Of: Intel LAN Controller
 

How would you hide from being displayed in bios setup the 5G Menu Lan option?

Thanks

Will this work:

0A 82 Supress if
12 06 C2 0D 01 00 variable dc2 equals 1 (moved up to top from below)
05 91 90 22 91 22 C2 0D 01 00 BF 11 10 10 00 01 00
09 07 0B 13 00 00 00
09 07 30 18 10 00 01
29 02
02 87 02 00 00 00 00
29 02
05 91 92 22 93 22 C3 0D 01 00 C0 11 10 10 00 01 00
09 07 0B 13 10 00 00
09 07 30 18 00 00 01
29 02
29 02

So, hide 5G LAN and unhide 5G LAN PXE? Or do you want to hide them both? It looks like you are hiding both now, but you'd have to test the edit and see what it looks like in IFR post-edit
In general, yes, you can move suppression from the bottom to the top, entirely so only top is hidden (needs 1x 2902 moved up to top for that too), or make it encompass both, just make sure you aren't adding or subtracting any bytes

What is the edit here for? >> variable dc2 equals 1, and if you meant to change that to avoid the suppression 01 may not work either, best to use FF.
Also, be sure to check similar suppressions with variable other than 00 to make sure you are adding the 01 or FF in the correct location

You can also do this, to avoid suppression and not edit the variable at all (unless MSI BIOS)
Suppress If {0A 82}
QuestionId: 0xDC2 equals value 0x0 {12 06 C2 0D 00 00}
End If {29 02}
One Of: 5G LAN PXE Option ROM, VarStoreInfo (VarOffset/VarName): 0x11C0, VarStore: 0x1, QuestionId: 0xDC3, Size: 1, Min: 0x0, Max 0x1, Step: 0x0 {05 91 92 22 93 22 C3 0D 01 00 C0 11 10 10 00 01 00}
One Of Option: Disabled, Value (8 bit): 0x0 (default) {09 07 0B 13 10 00 00}
One Of Option: Enabled, Value (8 bit): 0x1 {09 07 30 18 00 00 01}
End One Of {29 02}


This may need done via AMIBCP Show/Hide, if setup edit fails to have any effect.

Zitat von Lost_N_BIOS im Beitrag #3

---

So, hide 5G LAN and unhide 5G LAN PXE? Or do you want to hide them both? It looks like you are hiding both now, but you'd have to test the edit and see what it looks like in IFR post-edit
In general, yes, you can move suppression from the bottom to the top, entirely so only top is hidden (needs 1x 2902 moved up to top for that too), or make it encompass both, just make sure you aren't adding or subtracting any bytes

What is the edit here for? >> variable dc2 equals 1, and if you meant to change that to avoid the suppression 01 may not work either, best to use FF.
Also, be sure to check similar suppressions with variable other than 00 to make sure you are adding the 01 or FF in the correct location

You can also do this, to avoid suppression and not edit the variable at all (unless MSI BIOS)
Suppress If {0A 82}
QuestionId: 0xDC2 equals value 0x0 {12 06 C2 0D 00 00}
End If {29 02}
One Of: 5G LAN PXE Option ROM, VarStoreInfo (VarOffset/VarName): 0x11C0, VarStore: 0x1, QuestionId: 0xDC3, Size: 1, Min: 0x0, Max 0x1, Step: 0x0 {05 91 92 22 93 22 C3 0D 01 00 C0 11 10 10 00 01 00}
One Of Option: Disabled, Value (8 bit): 0x0 (default) {09 07 0B 13 10 00 00}
One Of Option: Enabled, Value (8 bit): 0x1 {09 07 30 18 00 00 01}
End One Of {29 02}


This may need done via AMIBCP Show/Hide, if setup edit fails to have any effect.

---

I hear that, I'd want to hide them both too then. Try AMIBCP 5.02.0031, if you can't find it shoot me a PM
Since you are hiding it you can leave variable as original, no need to edit to 01 or FF

Zitat von Lost_N_BIOS im Beitrag #5

---

I hear that, I'd want to hide them both too then. Try AMIBCP 5.02.0031, if you can't find it shoot me a PM
Since you are hiding it you can leave variable as original, no need to edit to 01 or FF

---

Link me to BIOS and a stock flashed FPT dump, combined into a single package. Did your setup edit not work? If not, are you sure it was OK, looked good and proper on edited file IFR output?
You may need to use older version if 0023 worked and 0031 didn't, try 5.01.0014