Forum - BIOS Modding Guides and Problems » Stuck at post code 95 after bios flash..

Win-Raid Forum (Drivers - Firmware - Modding) � BIOS Modding � BIOS Modding Guides and Problems � Stuck at post code 95 after bios flash..

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#1 | Stuck at post code 95 after bios flash.. datum

Sun Aug 03, 2014 4:47 pm

Hi,

I modded my Asus P8Z68 bios to a newer intel raid rom version using mmtool. Just had one hiccup. After flashing from within the Asus bios utility and successful flash message the system rebooted and stalled on post code 95. Fearing a bad flash I pressed the power button and was able to continue no worse for wear. I tried this twice after reverifying my modules were placed correctly using hex editor. Should note i took the original bios file through a backup of the bios and then modded it. Never happened like this before. Anyone know what's post code 95 all about?

Thank you.

reply

#2 | RE: Stuck at post code 95 after bios flash.. datum

Sun Aug 03, 2014 5:12 pm (Last edited: Sun Aug 03, 2014 5:12 pm)

Zitat von davidm71 im Beitrag #1
Hi,

I modded my Asus P8Z68 bios to a newer intel raid rom version using mmtool. Just had one hiccup. After flashing from within the Asus bios utility and successful flash message the system rebooted and stalled on post code 95. Fearing a bad flash I pressed the power button and was able to continue no worse for wear. I tried this twice after reverifying my modules were placed correctly using hex editor. Should note i took the original bios file through a backup of the bios and then modded it. Never happened like this before. Anyone know what's post code 95 all about?

Thank you.

try modding your bios with UBU: [Tool] "UEFI BIOS Updater" (UBU)

reply

#3 | RE: Stuck at post code 95 after bios flash.. datum

Sun Aug 03, 2014 9:15 pm (Last edited: Sun Aug 03, 2014 9:15 pm)

@ davidm71:

Since I used an ASUS P8Z68-V mainboard for a long time, I have flashed very often a modded BIOS into the BIOS chip of the board.
I always modded the latest original BIOS version, which was offered by ASUS, and flashed the modded BIOS by using the EZ tool - without getting any problem while or after flashing the modded BIOS.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

error to load misc bin file [solved] �

Please enter a reason for warning.