Immediately apologize for my curve English.

I purchased a Samsung 970 Evo Plus NVMe M.2 SSD and under no circumstances can my computer see it.
The problem is this. I did everything as indicated in the instructions, changed the file via "UEFITool", but when I flash the BIOS, it gives an error.
I tried it through Efiflash, it writes Current Flash Utility is outdated. Ask your supplier to visit the Gigabyte website (http gigabyte.com). For updated!
Help to get around this problem.

Gigabayte Aorus Z390 Master

@Seraph1m - please upload your modified BIOS and I will fix it for you so you can flash with Qflash.

https://drive.google.com/open?id=1kCW4OX...EeXGoEyvphwZTLu

I would be very grateful if you point out my mistakes

Zitat von Lost_N_BIOS im Beitrag #4545

---

@Seraph1m - please upload your modified BIOS and I will fix it for you so you can flash with Qflash.

---

@Seraph1m

If you want to ask someone in this forum a question, you must do as Lost_N_BIOS and I did to you, and put "@" before the user's name. Then they will be notified. Otherwise, they will never know unless they read every thread in the forum.

@Lost_N_BIOS
https://drive.google.com/open?id=1kCW4OX...EeXGoEyvphwZTLu
My bios

@Paulos7 Thanks I'll know.

@Seraph1m - your BIOS Mod is done correctly - if you want to flash BIOS using Qflash, you must make this exact edit - [OFFER] Gigabyte GA-Z370-Aorus Gaming 7 BIOS mod (6)
If you can't figure out how to do that let me know and I will do it for you

@Lost_N_BIOS
I am very bad at programming and in numbers. If it doesn't bother you, help me not to do anything stupid.

@Lost_N_BIOS I did everything as you said. But now Qflash does not see my modified file.

@Fernando
Yes, I tried it too

@Fernando
If the file is not edited from 01 to 00, the Qflash file sees. After editing, it will stop seeing it

@Fernando
I figured it out. I flashed the BIOS with the NVMe module through Qflash, but the BIOS and W10 do not detect my SSD M2