[Edit] The BIOS in the OP has RST OROM and EFI SATA modules that are old i.e. 15.5.0.2875
I would recommend updating the BIOS modules to 17.5.3.4203 with Optane Driver 17.7.0.1006 (or using modules 17.5.0.4136 with Optane driver 17.5.1.1021).
Intel recommends to use RST v16.8 and later here;

Zitat

---

Intel has identified a driver issue with Intel® Optane™ memory enabled systems with Intel Rapid Storage Technology (RST) driver v.16.0.x, 16.5.x, or 16.7.x may potentially cause the loss of end user data or render a system inoperable.

---

This means you should also have RST OROM and/or EFI SATA modules in your BIOS that are 16.8 or higher and matched with a similar driver version.
ntel also has suggested fixes for Optane here.

Zitat

---

The module contains old data and needs to be reset or may not have been disabled properly from an earlier volume.

---

Acer also reported problems with Optane application pinning (only applicable to Optane modules greater than 16GB) here, for versions 15.9.x, 16.0.x, 16.5.x, or 16.7.x.

I am running a Kaby Lake 8130U with an Optane M10 using Optane driver 17.7.0.1006.

EDIT by Fernando: Unneeded blank lines removed (to save space and for better readability)

I update the bios RaidDriver, but the computer bios can not be entered.Can you help me to point out my errors ?Thanks.

I download the efi. file which is pure (without header) and and update the RaidDriver according this method, [Guide] How to extract/insert/replace EFI BIOS modules by using the UEFITool.

I only update the efi intel rst to 17.2.5.4046 ,while leaving the orom at 15.5.0.2875.
I list a picture below from the UBU tool. Thanks.
@ chinobino@Fernando


Giga B250m HD3, I3-9100f CPU

@lndbdx I have written a list on OROMs and EFI SATA modules that work (and don't work) with my Gigabyte Z170 motherboard here.

17.2.5.4046 is on the list that didn't work.

I recommend 17.5.3.4203 or 17.5.0.4136 and replacing both the OROM and the EFI SATA modules.

I can not find the 17.5.3.4203 or 17.5.0.4316 efi raid modules, can you post them up ,thanks! Because they are updated by the newer ones.
And what's the difference between efi raid driver and raid rom, I'm a bit confused.Thank you.

Sure.

The mod bios which functions well is created by the automatic tool. And I update the bios rst modules with UBU to 17.5.3.4203.
Unfortunately ,the mod bios still can not be entered. Maybe my operation is wrong, but I can not find out yet. Or the B250 chip is not suitable for the bios modules. Thank you anyway.




My computer: Gigabyte B250m-HD3， I3-9100f cpu