These problems have now been sorted！！

Looks like you can use Resource Hacker to extract the individual files, the BINDATA (contains setup.exe) and BINDATA2 (other files,) looks like 1st it shows the filename, 2nd is the file and 3rd what seems to be a offset.







Edit: so you will need to extract Update2.exe from main installer, then from this you extract with resource hacker Pack.exe (this is your 7zip SFX)



Here is the command the SFX runs to install your bios

;!@Install@!UTF-8!
RunProgram="H2OFFT-W.exe -sfx7z %%S execApp "
Protect="no"
;!@InstallEnd@!
 

Zitat

---

Internal variables of the module
Additionally, you can use the following variables of the module:

%%M - the name of the SFX archive (without path)
%%P - the value x86 or x64, depending on the platform of the OS
%%S - full path to the directory containing the SFX archive
%%T - full path to the directory where the contents of the SFX archive are extracted
All of these variables in modules are case sensitive.

All of these variables of the module can only be used in the configuration file and not in other programs (.Cmd, .Bat files) launched from the module.

---

Thank you for your reply

@wosyuanxiao - I ran BIOS EXE, collected files in %TEMP%, BIOS is inside Update2.exe. With 7zip installed, right click Update2.exe, choose open archive w/ #, select all and extract to new folder (or only select WinExtractor.exe and extract this), that contains the actual BIOS and flashing package
Run WinExtractor.exe and again go to %TEMP%, BIOS file and flasher will be in "ExtactTemp" in the %TEMP% folder - here is package in case you can't get it - http://s000.tinyupload.com/index.php?fil...237062161294187

Original BIOS link here, since the OP edited all the initial info out - https://www.fujitsu.com/downloads/COMP/f...937_VP_1.10.exe

@wosyuanxiao - I have moved this thread into the BIOS Guides and Problems section, since it had nothing to do with Intel ME section you originally posted in.