@pipes80 - Flashrom method bypasses all that.

Stupide thing have done 🤦
Delete bios with the command erase 🤦

@pipes80 - DO NOT REBOOT!!! Did you make any backup of BIOS first, ever, using any method? If yes, send to me to check to be sure it's full BIOS, unless you know how. Then program it back.
If you do not have any BIOS backup, please confirm you have the non-Wifi model, correct? https://www.asus.com/Motherboards/TUF-Gaming-X570-Plus/
If yes, download the stock BIOS, open in UEFITool and select AMI Capsule and right click, choose extract body. If you have the WIFI model, download it's BIOS and do the same. Then program that to the BIOS. This will get you booting.
Then send me images of all the stickers on your board, don't forget the long white skinny one, and be sure to check top/bottom sides of PCI/PCIE slots, and side of 24 pin. As well as on sides/bottom of all the I/O area, sticker may be on that plastic somewhere.

Never mind the above for now, Asus does not provide complete BIOS image on their website, BIOS does not end (no VTF - Volume Top File), so it will not boot like that, at least I'm 99.9% sure it wont.
You will need to find someone else with same board on some forum (Ask this user at OCN, or find others), and ask them to send you a dumped BIOS, using the method in the Annex section of post #1.
That or purchase one of the dumps found in google at paid places, but before you do that, be sure users comment that it's OK (some places just extract body from capsule and call this a "BIOS dump" and in this case that will not be bootable, or at least I do not think so anyway)
Then we fix with your details, then you program it back.

Do not reboot, unless you have flash programmer, then it wont matter and we can fix with programmer, once you have someone elses dump we can use.
Once you reboot though it will be bricked, so be ready for that, and know it's coming, or do not reboot.

@icelandicsamurai @PH9214 - Do you guys still have X570 TUF Gaming Plus (Non-WiFI or WIFI Models OK for this purpose)
If yes, would you mind to please dump BIOS using method from "Annex" section of post #1 in this thread, if you can, thank you very much!
Sorry PH9214, if you're still stuck, I just now seen [url=https://www.win-raid.com/t6347f16-TUF-Gaming-X-Plus-Stuck-In-Recovery-Mode-After-afudos-recovery.html]your thread[url]. You may need to wait here too, once we fix this for pipes80 I can help you fix, but you will need flash programmer if you can't boot to DOS right now.

Too late, i have reboot thinking then the command E no work and now the board not boot Up only Power on

@pipes80 - Very sorry to hear you rebooted!!

This board is not very TUF without USB Flashback, bad name they chose for the series!
You will need flash programmer to fix + you will need to make your own SPI header cable, because BIOS on this board is WSON and cannot be clipped
Tag @elmor over on this Asus page, and ask him if he can give you the pinout for 13-pin SPI header for Asus - https://rog.asus.com/forum/showthread.ph...p-PCIe-x16-slot
Or maybe @dsanke or @chinobino can link you to an image or some info etc

Hello ,

I run UBU tool and flash in Asrock >> instant Flash >> flash and reset >> reboot and ME FW 11.8 by the same not any change to 11.7 for coffeelake . Any brothers show me solution pls , many thanks ! Asrock H110M-DGS rev 3

Zitat von Lost_N_BIOS im Beitrag #755

---

@pipes80 - Very sorry to hear you rebooted!!

This board is not very TUF without USB Flashback, bad name they chose for the series!
You will need flash programmer to fix + you will need to make your own SPI header cable, because BIOS on this board is WSON and cannot be clipped
Tag @elmor over on this Asus page, and ask him if he can give you the pinout for 13-pin SPI header for Asus - https://rog.asus.com/forum/showthread.ph...p-PCIe-x16-slot
Or maybe @dsanke or @chinobino can link you to an image or some info etc

---

@digilabs - You need flash programmer, or do to pinmod (see E.1 here) then dump FD with FPT, edit per section B, spoiler 2, image 1 or two of same thread, then flash it back.
Then you can flash in the modified ME FW region downgrade using FPT

@pipes80 _ ALL This BIOS mods you do over time, and you don't have cheap programmer yet!?!?! Get a set, it's cheap
Genrally speaking, you use SOIC8 (SOP8) test clip with cable, to attach to BIOS that are soldered to board, or you use U Type Flat IC extractor to pull BIOS that are in sockets.
Connecting via SPI cable can be done as well, if you have the right cables or make them, if the board has SPI header. But, directly about this board, it SPI Header, right beside the BIOS chip, I looked before I replied to you. That is SPI/TPM (either or)

Wow, another board bricked too!?!?! Please stop flashing BIOS to boards for now, it sounds like you need help doing BIOS mods At least let someone check your mod before you flash
I can help anytime, just ask me

PLCC32, soldered, is tough one, you will need to desolder probably! Unless board has a SPI header?
If it was in socket, I could link you to programmer to fix

I have TLC 866 but cannot flash a soldered BIOS...the bios had updated for Xenon mod withaward BIOS editor but maybe have wrong things...

@Lost_N_BIOS
I wonder if flashrom could flash the assign region or address of bios?

@gloobox - Not sure, he would have to try, probably not since the board is so old. Maybe via COM or SPI header, but I don't know about any guides on how to connect to COM for flashrom/BIOS functions.
@pipes80 - See if you can read chip with flashrom using Fernando's method in "Annex" section of post #1 in this thread

Zitat von Lost_N_BIOS im Beitrag #761

---

@gloobox - Not sure, he would have to try, probably not since the board is so old. Maybe via COM or SPI header, but I don't know about any guides on how to connect to COM for flashrom/BIOS functions.
@pipes80 - See if you can read chip with flashrom using Fernando's method in "Annex" section of post #1 in this thread

---

@pipes80 - Ohh yes, sorry, I forgot you need to boot the board to use flashrom that way Flashrom may work when connected via COM port, but I have no idea how to connect that for this kind of usage, but surely you can find some guide for "SPI COM port flashrom" in google
Those programmers you linked are highly regarded by many, but I've never used. If you can desolder and solder that kind of chip, then it should work once inserted into the adapter.
And, if you can desolder that chip, may be best to solder a PLCC32 socket in it's place instead of putting the chip back. Use solder paste, not flux, and hot air, to solder socket in it's place, unless socket has legs on outside too, then either way solder/hot-air could be used.

I have TLC 866 non plus and work fine but no have SPI connettori version

You'd have to make a cable yourself, to connect into programmer like DIP8, then connect to COM port, but I am not sure what wire goes where to COM