Zitat von Fernando im Beitrag #3743

---

if you additionally update the Intel EFI RaidDriver module by using the UBU tool and check thereafter within the BIOS, which version the "Intel(R) Rapid Storage Technology" option shows.

---

@Fernando unfortunately motherboard refused the bios, I formatted my usb with FAT32 and pasted into the usb then flashed via flashback method but the light of usb blinking twice and stopped.

@Fernando R4G.CAP name is mandatory for flashback bios. Check this out https://www.youtube.com/watch?v=JVvHwq3syqI

Also I uploaded ASUS RAMPAGE IV GENE latest Original Bios file,if you can add nvme module which is works and as you said before with IRST update I would be grateful.
Best Regards.Thank you.

@Fernando @Paulos7 I just realized about the bios update problem; I tried 3 different USB flash to Update Bios and I thought two USB was succesfully after blinking flashlight first and 5 mins later faster blinking and stopped. so I checked the bios dates still the same (for my latest date showing 2014/05/15) and this mean my motherboard corrupted to upload bios,also in EZ Flash method I tried upload ASUS Rampage IV GENE latest original Version 4901 2014/06/26 bios date but still showing 2014/05/15 bios in my information,so I tried your modded R4G.CAP nvme IRST v13.1.0.2126 integrated bios file and was succesfull with flashback method as the same after 5 mins. blinking stopped. and I returned to Bios as you said,I disabled CSM and changed AHCI to RAID and saved with F10 and I shutdown my pc as you said about 1-2 min and after I entered to the bios so in the SATA Controller under RAID the "Intel(R) Rapid Storage Technology" is disappeared. and I checked the date in EZ Flash Utility in bios,still same date 2014/05/15! I don't know why, I did correctly everything but still can't flashing original bios or modded. Asus Suite III Update Program doesn't work anymore in Windows 10. I unplugged everything in the motherboard but Flashback Method doesn't work too.. I'm upset why is that I can't figured anymore I'm so exhausted with this situation. so how can I update bios without flashback method? :(

or should I try to downgrade bios?

@memomix - smaller USB Better, like 256MB - 2GB, cheaper better too. It sounds like it's working, blinking lights, getting faster as it ends, that's working.
Anyway if you cannot get it, you can use FPT (Flash Programming Tool) from this Intel System Tools package - https://mega.nz/#!CF1l1LJK!K2l6_74FPsGig...Rvp8Efj8a5drZSc

First, make a backup using FPT >> FPTw.exe -bios -d backup.bin
And then keep that safe in case you need to fix serial/UUID later, in case you need to fix any ID's later that are stored in BIOS Region.

Then open your modified .cap BIOS in UEIFTool, and right click BIOS region as shown in this image below, choose extract as-is, save as whatevernameyouwant.bin

Then, run this command to flash BIOS region using the BIOS region file you extracted from your modified BIOS using UEFITool >> FPTw.exe -bios -f whatevernameyousavedaboveas.bin

Do not use this tool with .cap files, and do not proceed if you get a yellow or size warning, if you do show me image of command entered and warning shown and I'll let you know what to do next.

@memomix,
I wish I could help you with the BIOS flash issue, but I'm unfamiliar with Asus flashing. You'll have to wait for Fernando to reply. But, don't give up. It took me a solid week to figure out how to mod the BIOS, install Windows 10, and also install Windows 7. So, 2 or 3 days is not so bad :). It could be something as simple as the flash drives you're using. I think smaller than 8GB and only USB 2.0 is best, but that's just me.

@memomix I used the 0801 Beta ones straight off the ASUS Website and a Kingston PCIe M.2 Adapter Card.
The USB Stick I used was one I received with my copy of the Evolve game - Probably a generic AF 8GB stick which I quickly reformatted into FAT32.

Upgrade was fairly straightforward - Turn OFF PC - Insert USB Stick into ROG Connect USB Port on the IO Shield - Push and hold ( 3sec ) ROG Connect Button on the IO Shield - ROG Connect Button will light up, then slowly start blinking until it finishes with fast blinking then, after like 2min, signaling it's done by turning off - Turn ON PC - Rejoice with working NVMe SSD =)

@Fernando thank you for your help,some helper are here saids 8 GB USB Flash is the problem for update to Bios,is it? I think my motherboard is soft bricked to bios update,EZ Flash or Flashback method doesn't work,looks like it was updated successfully but when I turn back to in Bios is the same date with same IRST. by the way I didn't try your mod yet.. I will soon..

@Lost_N_BIOS thank you for your help,it's seems need to be expert with dos stuffs to do this method I think,I don't want brick my motherboard. is there any Video or screenshot guide with step by step please?

@Fernando in THIS link is the latest official bios files on the top, "Version 4901" "2014/06/26" what I was send you. Now I'm using bios with modded but still can't see if it is. in the Bios nothing changed,I can't see in the "Boot Priorities" SSD or PATA or PATA SS so when I change AHCI to RAID the IRST showing up first before saving F10 but when I saved and restart and go to in Bios then IRST disappeared. so how can I find look up information IRST in Windows? I have AIDAX64 EXTREME EDITION but I didn't find anywhere to looking IRST information if changed or not! UBU Tool wants only bios file to find out,so how can I reach this information if is changed?