@ambad4u - that is a lot to assume, in what you are asking I mean, we have to assume what you meant
I would assume not, and would correct BIOS specific for your system. Unless you compare stock BIOS from each, post extraction and find all regions to be matching.

Additionally, you would not want to use any file here, otherwise you will loose your board specific details (serial, asset tag, LAN MAC ID etc)
You could use FD region from any BIOS here, but that is as far as I would assume unless it's been proven and tested that the ME and or BIOS region is swappable between all those and everything still functions properly.

Noted, I will just have to wait until I get one (an SFF).

Yes, once you have system, you can send me dumped BIOS and I can do whatever you need done to it.

@Lost_N_BIOS

What he met the "F1" when he boot the machine @sith means He boot it only with the nvme SSD and without any SATA HDD or SSD.
So the bios would show the "F1".

I also wonder how to solve this "problem" by modding bios?

@gloobox - sorry, I don't know what you mean above (or what you're referring to there either), or what that problem is, so I can't tell you how to solve with mod BIOS.
Ohh, I looked back, I think you mean you get stop on POST Screen with F1 message about no hard drive? If yes, then do M.2 or NVME mod to BIOS, then follow guide, get BIOS setup to boot from that device then F1 should go away
If you mean how to bypass the error itself like I mentioned on post #29, I was talking about editing the module that contains that error to bypass it in assembly, so it's never a possible option

@Lost_N_BIOS
Yeah,I mean I got stop on POST Screen with F1 message about no hard drive.
I ever saw someone mod the bios of HP Z97 and had bypassed the error message even no hard drive or no fan plugged in.So I wonder how to mod it.
Here is the modded bios about the HP mobo.
HP 2B36-A0.13.bin
http://s000.tinyupload.com/?file_id=49116626727914067304

Hey @sith ,
Do you happen to have the txt file for FPT I could use? I tried digging for it but all the download links don't work anymore. When I run FPT, I get "FPT cannot be run on the current platform".

Also, I get "Platform Signature not found" while using phlash16.

Thanks to anyone who can help!

Zitat von Lost_N_BIOS im Beitrag #35

---

@gloobox - sorry, I don't know what you mean above (or what you're referring to there either), or what that problem is, so I can't tell you how to solve with mod BIOS.
Ohh, I looked back, I think you mean you get stop on POST Screen with F1 message about no hard drive? If yes, then do M.2 or NVME mod to BIOS, then follow guide, get BIOS setup to boot from that device then F1 should go away
If you mean how to bypass the error itself like I mentioned on post #29, I was talking about editing the module that contains that error to bypass it in assembly, so it's never a possible option

---

@Jah-On I believe this is the text file that works with FTP which is 639kb

And the source of the FTP was in the attached zip file of Intel ME System Tools in the 'Flash Programming Tool / DOS' folder.

Posted in wrong thread. Sorry.

Hi @sith

As far as I understand you had completed following steps:
1. Install jumper to enable Service mode
2. Crete full SPI dump 12 Mb (FPT.exe -d backup.bin) from FreeDos
3. Create BIOS region dump 6 Mb (fpt.exe -bios -d bios.bin)
4. Mod BIOS region dump from step 3 by MMTool 4.5
5. Insert NVE small compressed due to volume size limitation (volume 03.02-00 at position B8)
6. Write mod to flash (fpt.exe -bios -f mybios.bin)
7. Remove jumper to disable Service mode
8. Install Windows 10 at UEFI mode to GPT nvme disk
Is it correct?
As I understand you flash BIOS mod from MMTool 4.5 and it's working fine.

I confirm that sequence from post #41 is working fine.
BTW, I eliminated "Alert! No hard drive found" by unchecked all SATA drive in BIOS except SATA CD-ROM.

Post 41, confirmed working on a dell precision t5610. Also post 42's solution to disable the no hard drive found error, worked as well. Thanks guys!