@Lost_N_BIOS

Try to sue them for violation of the right to choose.
Only 100% will receive a counterclaim for violation of copyright rights and intellectual property rights.
So rejoice at what is. :)))

Edit:
This is a joke. :))

F seriously. On the one hand, the fact that BIOS is protected from outside interference has its advantages. F seriously. On the one hand, the fact that BIOS is protected from outside interference has its advantages.
F seriously. On the one hand, the fact that BIOS is protected from outside interference has its advantages.

@aGeoM

Asus recently does not shine with its former reliability. I used to prefer Asus, but lately there have been sheer disappointments and my priorities are now MSI and Asrock.

5.0.0.2 it is antique. I had 5.1.x.x, but also not ice.
The Logo is better, easier and more reliable manually change

Zitat von 100PIER im Beitrag #1297

---

@Ludolf
Thanks, I tried (W10 x64) but did not worked nor with Python v3.8 nor with v3.9b version.
I tried also default settings (users) for the Python emplacement on system disk and also the personalised emplacement such as C:\program.
No success. UBU does not detect Python.

---

@ALL

Please respond who uses the Matrox graphics.

The Microsoft Store version of Python does not have the "py" command, only "python".

@SoniX Looks like that line needs to be changed again for the Microsoft Store version;

set mce=python mce.py

In general, all this is strange.
It runs without problems without specifying "py mce.py" or "python mce.py".
At the moment, Python 3.8.3 is used.

Added:

Ok. Let's try.

Can this new version be run without installing Python at all? Like my inserting the MCE.exe file from an older version into the UBU folder?

I am not a fan of installing much on my PC so I am not looking to install Python if I do not have to.

@D2theZ

You can use MCE.exe, but you will need to update the MCE.exe and MCE.db files yourself.
Download the latest versions of MCE

Hello,

I use since a long time ubutool, up to version 1.78 with z87-plus motherboard + bios 2103
I think since version 1.79 is out, when i try to flash z87PL.cap with asus flashback, there is a strange thing happening:

Temperature tab on main uefi page (ez mode) show just temperature, and in advanced mode, Monitor, cpu temperature is negative.
Fan from grandmacho rt run at 331rpm, but won't go higher in automode and manual mode.

It's like this since 1.79, even if i just update only one module from sata, to gop or gbe. Same thing happen, if i update only Microcode.

I don't know if it has already been posted, as it would be a duplicate bug report, anyway 1.78 latest version is fine :)

I just remember one time , one version of ubu tool bringed negative temperature report, but it was fixed once evolving to the next version.
I didn't reported it , because i thought it was due to bios corruption of some sort, or just not having cleared cmos.

Anyway, thanks everybody at win-raid forum, this site is a gem.

It's off topic, but still:

I thought the temperature bios bug was due from me having updated to latest 9.1 version on a 8. chipset. I was mlucky to bring back the ME to 9.0 from using amisetupwriter 0x8A 0x0 0x3c3 0x1 0x89 0x0 0x8C 0x0 to unlock bios lock and me reflash. I just had to use ctrl alt del to reboot, and ulock again with amisetupwriter 0x3c3 0x1
Next step was:

with help of intel ME system tools 9.1 + flash toolkill batch files : merefl.bat with 2103 bios renamed bios.bin, worked. 9.0 original me engine loaded after automatic reboot. next step, i upgraded firmware to latest 9.0 branch ME with meupd.bat, + 1.5Mb firmware files renamed to ME.bin + shutdown batch, to reset ME.

Ok sorry again for off topic just to say i had still negative temperature with orignal 9.0 ME, till i went back to ubutool 1.78 branch.

Have a good week :)

Hi guys!
Im confused right now. Asus Crosshair Hero VIII latest bios 2103. First question is it ok that UBU tell everywhere this:

parseBios: one of volumes inside overlaps the end of data
parseBios: one of volumes inside overlaps the end of data
parseSection: GUID defined section with unknown processing method
parseSection: GUID defined section can not be processed

Second question to python. Installed colorama and prettytable.

Traceback (most recent call last):
File "mce.py", line 1017, in <module>
mce_hdr(mce_title)
File "mce.py", line 897, in mce_hdr
hdr_pt,hdr_pt_empty = mc_table([], False, 1)
File "mce.py", line 862, in mc_table
pt.set_style(prettytable.UNICODE_LINES)
AttributeError: module 'prettytable' has no attribute 'UNICODE_LINES'

And endless string AttributeError: module 'prettytable' has no attribute 'UNICODE_LINES' in cmd after looking for newer database. How to fix this?

I will stay with the old versions of UBU (I don't want to use python, have to install it), too bad
Or possible to use the latest version of UBU and MCE (like before actually) ?

Thanks

@tistou77 - Yes, see post #1314 just a few posts up

@Lost_N_BIOS

Thanks but I have already tried and I still have the information that python is missing and it does not work

Sorry @tistou77 - I had not tried myself, and only assumed it was OK that way based on above comment and I thought someone else did before and explained too.
You'll have to wait for @SoniX to explain how to use the normal non python, probably something in main ubu batch file needs changed for that.