I can't wait! :D

But seriously, it would be great to have an updated UBUTool with all the latest files and fixes as the roll out the latest round of BIOS updates for AMD Boards with a new AGESA just has started on Friday.

@Fernando
I get these messages just after click on UBU.bat
It seems to me that the command line interpreter cannot recognize a single quoted text within this batch file.
Strange, because no one reports such a problem.

This issue has been carried over here from [Guide] How to flash a modded AMI UEFI BIOS, after Fernando discovered that it's related to the UBU tool.

I have problems successfully flashing my Asus ROG-Strix-X570-E-Gaming.

I can easily replace the RAIDXpert2 UEFI driver with UBU tool and after that it shows the correct version - 9.3.0.120. I am doing the standard Asus flashback via the special USB port. It shows that it's flashing as per normal - the light is blinking and so on. After it's done, I reboot it, reconfigure the UEFI settings and everything looks fine. However, when I check the RAIDXpert2 UEFI driver in the BIOS, is still shows the old version - 9.2.x.x. I am wondering how is this possible since the 9.3.0.120 module has been inserted successfully by the UBU tool. I tried every recommended method, but all of them give error when I try to flash it. Only the flashback is working, but then it still shows the old RAID version.

Any ideas?

I just wanted to add that there are also more issues with modding the other existing EFI modules on ZEN2 Asus bioses (Aptio 4).

I took the latest one (1407) of the ASUS ROG-Strix-X570-F-Gaming (nearly identical to the E-Gaming but without the WIFI/BT AX200 and the Realtek 2,5G PHY) trying to update all possible modules listet by UBU without success. E.g.: UBU told that 2 uCodes which could be upgraded but by letting UBU updating these (using latest MC.db) it tried to update alle existing uCodes (instead of the two not current ones). At the end UBU shows that the related uCodes weren't updated at all.

Yeah ASUS results are weird, I can not update microcode on ASUS ROG STRIX X570-E Gaming (https://www.asus.com/Motherboards/ROG-St.../HelpDesk_BIOS/)
For some reason UBU detects old AMD CPUID's using the "F" option.

Hi guys

I do not have this board in my hands but is already ordered, and I am anticipating the arrival.

Some considerations:
1- ASUS ROG STRIX X570-E should be detected as an Aptio 5 and not 4.
2- This is an 32Mb bios with 2 parts, 1st part for Ryzen 1000/2000 (Offset 00000000-00FFFFFF)* and the 2nd for 3000 (Offset 0100000-01FFFFFF)* series.

Splitting the BIOS to UBU modding and using MMtool 5.02.0025 as mmtool_a4:

Scanning both BIOS:




Disk Controller:





Video Onboard:



Network:






MicroCode:





Results:

Compare Mod BIOS (left) with Original:

 drive.google.com/file/d/1Giwj_PR3GIepuCm1QziiUSdFCK3kg03I/view?usp=drivesdk
 

; flash it at your own risk. As I said, I do not have the board yet, but that should not be a problem with the flashback feature. :)

Be well and be safe...

* Capsule removed.

EFI GOP Driver SKL-CML - 9.0.1107 (>9.0.1102)

@Fernando, @SoniX

@aGeoM Thanks, man. This is pretty interesting finding. I would flash it straight away to try, but I noticed that you used the old EFI RAID driver - 9.2.0.127. My idea was to insert the newest one which is 9.3.0.120.

Welcome
I tested the latest on my C6 Hero, only Sata RAID worked, NVMe RAID only recognized in Windows, could not boot from it. I can do it for strix as soon as possible.

@aGeoM:
I didn't mean the NVMe RAID, but the normal SATA RAID which should be 9.3.0.120. I am not using NVMe RAID at the moment, so I don't really care for now. Thank you!

It controls both SATA and NVMe.



drive.google.com/open?id=1HQCigfM0OWr_phS5qPgF0PKyGiMM9nBF

@aGeoM

Just flashed it and it works! Thanks a lot! Cheers!

You are welcome.

All the best...