I tried to create a Cloud on Google, but unfortunately I am offered to create a Storage as a Business.
Resuos Mega is not available for me.
:((

Zitat von honeybadger im Beitrag #525

---

I have reached out to Asrock support. They responded with usual BS how it does not need to be updated. Called them out on it. Flashed my hex edited bios. Willing to share it with others. if they need it.

---

Well.
I used another Internet provider.
Created an account on Mega. That's what happened

https://mega.nz/#F!MSRDxSqR!5etS-te7ZqRQX9Zb25es_A

Folders are still confusing, but if users see the folders "Modding" -\ "Files" and "Tools", then I will fill them out.

I can see them with a german IP.

https://mega.nz/#F!MSRDxSqR!5etS-te7ZqRQX9Zb25es_A

@SoniX @Fernando

I have the newest UBU. Those links work fine. I should have been more specific. The link that's dead is for the latest version of the 7z-archive named "Intel_RST (e)" I'm assuming this is an archive of all the RSTE Drivers & Orom bios files for UBU? The newest UBU doesnt have any drivers in the Files/Intel/RST. I'm not sure where to find or how to add them for my bios to update my OROM intel RST for sata. I added some pics to show what pops up in the beginning and then the original drivers and then after i updated everything. The only one i havent been able to update is OROM intel RST for sata. This is my first attempt at bios mod so im just trying to figure it all out

Another question that i had was.. Before the update of my Network - I have 2x intel gigabit ports on my board - it shows OROM INTEL BOOT AGENT GE for both of them. Then after the update is shows GE on one and CL on the other. i dont use the network boot anyways just curious to why it changed like that

EDIT: I found the files! In the link that Sonix posted. DUH! i just didn't dig deep enough! I thought FILES was part of the UBU

EDIT by Fernando: Fully quoted posts replaced by directly addressing (to save space)

Ok so i think i have it finished!

I've uploaded the original bios and the updated as well as a pic of before and after. I updated everything plus the microcodes. Could anyone confirm this is good please? Also are these the newest/best updates available? I'm running raid on the Intel and Marvell controllers. I've got the RSTe DRIVERS v13.1.0.1058 and RSTe Software v13.1.0.1058 to go with the 13.1.0.2126 update. What is the recommended Drivers for the Marvell controller on windows 10?

All the guides are excellent! You guys are awesome! Without this i'd have never been able mod a bios! Thank you!

Hallo guys!

Well, I am playing with an old intel DG31PR motherboard with sc775 and I use UBU_v1.76.0.1 with MMTool 4.50.0.23 as mmtool_a4.exe to add/inject the microcode for old Xeon E5430 (https://ark.intel.com/content/www/us/en/...33-mhz-fsb.html) into the bios.

Now I really wonder why the option 5 regarding microcodes ONLY allows to "Find and Replace" the micorcode via either MCUpdate.txt or USR_list.txt instead of, lets say, "Find and Add". The "Find and Replace" option deletes all other microcodes. Why? Because of final bios file size? I dont want to lose the option to use all the sc775 CPUs that are natively supported, I just wish to add some more microcodes for more CPUs, including HW+SW mode for sc771 CPUs.

I remember couple years ago, I just added microcode in to my ASUS P5P43TD bios using MMTool and the option "Insert..." in the CPU Patch tab, with no need to remove other microcodes. The P5P43TD now runs Xeon X5472.

Here is the original bios file: https://downloadcenter.intel.com/downloa...-?product=50375 It contains microcodes for 57 CPUs.

Here is my modded bios file: with only 13 micorcodes/CPUs support:
https://www49.zippyshare.com/v/NgfeDiJf/file.html
http://www.mediafire.com/file/nkku21du9w...PR0071.zip/file

QUESTIONS:
1. Is there a way to inject the new/additional microcodes in the bios, while keeping the other microcodes, using the UBU tool...at all?
2. If not then what tool shall I use to do so?

Thank you in advance!!

Regards, George

Zitat von GeorgettaCZ im Beitrag #578

---

1. Is there a way to inject the new/additional microcodes in the bios, while keeping the other microcodes, using the UBU tool...at all?

---

Zitat

---

306C3 USR_mCode\cpu306C3_plat32_ver00000027_2019-02-26_PRD_4F5914B9.bin
306C2 USR_mCode\cpu306C2_plat32_verFFFF0006_2012-10-17_PRE_30531EB4.bin

---

After

Zitat

---

306C3 USR_mCode\cpu306C3_plat32_ver00000027_2019-02-26_PRD_4F5914B9.bin
306C3 USR_mCode\cpu306C2_plat32_verFFFF0006_2012-10-17_PRE_30531EB4.bin

---

For 306C2 use as 306C3 'CPUID'.

@sonix ubu 1.76 is it supported for phoenix bios?thanks

If Phoenix UEFI - partial.

@pokuly - glad you were able to do the mod yourself. Yes, either way is OK/same, especially since new/old microcode is same size in this case, I just wanted to be sure since that user didn't reply back originally.
Sometimes this breaks the BIOS so hoped we could be sure from him before you did anything.

Zitat von Scoty im Beitrag #523

---

I used UBU first time and i will Update my Bios. Here some Screenshots. Microcode i see new Update, Disk Controller i have the latest but Network and VideoOnboard i see nothing. Which file i need for both?
My Board is a Gigabyte z390 Designare and latest Final Bios is F8.

---