@elisw

Thanks!
In UBU:
File from "Files\Intel\GOP\1151\IntelGOPDriver.efi" copy to folder "Files\Intel\GOP\1151v2\"
If you select "Video", it should be displayed as 9.0.1080.
Replace, flash and check.

done!
both HDMi and DP are working fine, could enter the BIOS and edit parameters.
Unfortunately I cannot check the DVI port as I don't have a cable/adapter.
edit: not sure if it is relevant but it takes a bit longer to turn off: screen goes black, no HDD activity but it takes nearly 30 seconds to stop all lights and fan.

Thank you This information is enough for me.

When I update the Gigabit LAN modules of my ASUS Maximus X code board, I get this warning message:

For compatibility of the DevID,
it is possible to install up to versions 6.6.04 and/or 1.5.62

What does it exactly mean? To be complete, here's what all the text I got:

Network
[Current version]
EFI Intel Gigabit UNDI - 0.0.13
OROM Intel Boot Agent CL - 0.1.10

[Available version]
-\ for i82579/i217/i218/i219 chips
EFI Intel Gigabit UNDI - 0.0.23
OROM Intel Boot Agent CL - 0.1.14
-\ for i210/i211/i350 chips
EFI Intel PRO/1000 UNDI - 8.7.10
OROM Intel Boot Agent GE - 1.5.88
-\ for 10 Gigabit chips

1 - Replace Intel
0 - Exit to Main Menu
Choice:1

For compatibility of the DevID,
it is possible to install up to versions 6.6.04 and/or 1.5.62

EFI Intel Gigabit SubGUID 4953F720-006D-41F5-990D-0AC7742ABB60
parseFile: non-empty pad-file contents will be destroyed after volume modifications
parseFile: non-empty pad-file contents will be destroyed after volume modifications
File replaced
OROM Boot Agent CL SubGUID 50339D20-C90A-4BB2-9AFF-D8A11B23BC15
Set Device ID 0x15B8
parseFile: non-empty pad-file contents will be destroyed after volume modifications
parseFile: non-empty pad-file contents will be destroyed after volume modifications
File replaced

EFI Intel Gigabit UNDI - 0.0.23
OROM Intel Boot Agent CL - 0.1.14
Press any key to continue . . .

@kevindd992002

This is for special occasions. When on board for example 2 networks, and one of them has outdated information about Device ID.

Zitat von SoniX im Beitrag #380

---

@kevindd992002

This is for special occasions. When on board for example 2 networks, and one of them has outdated information about Device ID.

---

@kevindd992002

With the advent of the i219 chip, Device ID was divided between BACL/Gigabit sypport 82579, i217-i219) and BAGE/PRO1000 (i210, i211, i350, eyc).
Everything is fine with you, since the chip is i219. OROM and EFI were replaced with the corresponding versions.

Ok, got it. And are EFI Intel Gigabit UNDI - 0.0.23 / OROM Intel Boot Agent CL - 0.1.14 the latest available versions already? I can't find a thread in WinRAID that shows the latest versions for these modules.

Zitat von Fernando im Beitrag #384

---

@kevindd992002: If you have the required time to start a new thread about the latest BIOS LAN modules and to keep it up-to-date for the next months/years, feel free to do it. I have spent and still spend a lot of time for such threads, but concentrate by efforts on Storage Controllers related BIOS modules.

---

@SoniX

Are the firmware here: https://www.station-drivers.com/index.ph...&id=523&lang=en the same as the "EFI Intel Gigabit UNDI" in UBU?

Yes.

Annotation for the release of UBU 1.75

• For EFI GOP Driver SKL+, possibility of forced replacement until the latest version.
• Replacing GOP VBT for HSW+ and SKL+, provided that there is 1 file in BIOS.
• For Intel microcodes, the ability to create your own list for replacement.

There video on board ASPEED. Is there anyway to replace corretly with UBU?

There is very good resource of UEFI / OROM drivers at the ASPEED websites, but what is the directory in UBU? AND / OR is there need for spesific customization?

EDIT:

Also UBU update only RAID for SATA, but not the sSATA at the same time. Both have the same drivers.

It is about Asus Z10PE-D8 WS.

@raun0

Please post a direct link to your BIOS file. I will look and answer all the questions.