@Cancretto - anything can be unlocked, I'm not sure what you are asking when you say " Can that" ... what?

@philsrb - Your image is too huge, cropped off, and inside submenus (not the advanced page only) I can't tell what you are showing there. Doesn't look like what I asked, I didn't want to know what was inside anything except at root of Advanced.
Don't go into any menu except advanced, inside advanced do you see the submenu I mentioned (PCH Configuration)? Don't go into it, I only asked if you see that submenu or not, it's a simple question
I think you are inside the submenu I asked about, but not sure due to enlarged and cropped off. I don';t really need to see an image, you just tell me do you have this submenu visible or not >> Advanced >> PCH Configuration << Do you see that?

* Edit - @philsrb - here, flash via USB Flashback only (made from stock BIOS)

Asus ROG-MAXIMUS-XI-EXTREME-1005-906EC-PRE84-Mods-HPET-TCO-SPD


@Cancretto - same as above, made from stock BIOS, flash via USB Flashback only

Asus ROG-MAXIMUS-XI-APEX-0805-906EA-PRE-x4-Mods-HPET-TCO-SPD

yes...i have that menu
------------------------
thanks is very very kind of you. i have flashed it on bios 1 and it shows me the unlocked options. in intel me version it shows 12.0.39.1431
on bios 2 which is also 1005 but not the modded one it shows 12.0.6.1120
i flased the modded bios with asus flashback port directly. is it alright?
right now for some reason when i boot win 10 it crashes after a minute. linux boots alright na runs i think i noticed some error when shutting it down though.

after turning off oc i dont have the problem anymore guesss ill have to reset all the parameters manually

alright...so after setting oc back to 5ghz and fixed vcore of 1.35 llc4 no avxoffset i get around 3-5c lower temps at first impression. on my system 3-5c is a lot since cooling is very strong. before i had max temp of around 76c on one core and now i get 71c on that same one which is a lot...of course its highly subjective but thats the first impression. ill report about performance and in detail after a while.

thsnks a lot @lostnbios

@Lost_N_BIOS many thanks dude I'll try this bios asap, also i meant can you do basically a full unlocked 0805, like all submenus and subsettings visible and configurable?

@philsrb - I did not do anything to ME, only unlocked the settings you wanted and put in the uCode you asked for 906EC Rev 84.
Also, I only made one BIOS, not sure what you mean about "BIOS 2" Yes, flash it via USB Flashback
Any errors you see may be related to that very old microcode, which windows8-10 may replace once you get into OS (you'll have to check in windows what is live/in-use microcode with HWINFO64 or AIDA64)
Yes, you should always load optimized defaults after you flash, then reboot back to BIOS and make all changes you also need.

@Cancretto - You're welcome. Yes, as I mentioned, I can do full unlocked BIOS menus, but I need to see images of all your currently visible BIOS pages, all submenus and all settings (ALL)

@Lost_N_BIOS do you saw some locked XP compatibility option in thoose Apex bios ?
I'm trying to edit Gene XI bios with AMIBCP but some tabs are missing :(

Thanks.

@Doc.Brown - sorry, I don't know anything about that kind of editing, you'll have to ask the active users over in the XP section.

@Lost_N_BIOS No problem just an idea taht came to my head during reading this thread :)
I already ask them for help,they have huge knowledge on the subject.

About HPET unlocking if I provide you 2 bios for Gene is it possible for you to unlock them please ? also on older motherboard there was an "Execute Disable Bit" Enabled or Disabled option if it's exist now is it possible to also make it appear in bios option.Both have a good performance impact in some benchmark ^^

Thanks.

@Doc.Brown - Yes, sorry I'd help if I knew about that, but I've never touched any of that kind of stuff so I wouldn't even have a clue where to look or how to look into the module etc.

Yes, I can make those edits for you, please make a thread about the Gene so others can find the mod BIOS too. I assume it has USB Flashback correct? If yes, then yeah please make a thread and I'll edit stock BIOS that way everyone can use.
If it does not have USB Flashback, then no need for a thread just send me the BIOS in a zip and I'll do the edits. Add a text file in there explaining what you want done to each BIOS, including whatever older one you mentioned (hopefully I can edit it too)

@Lost_N_BIOS

No problem I understand perfectly it's also my problem because of my lack of knowledge and there's not that much of info on the web to learn how to do it,it's sad cause it's a very interesting subject.

Yes there's USB Flashback on this board too so I'll open a thread in few days ;)

Do you use AMIBCP to make the mod ? (I've tried it but there's a problem of too much strings so the good tabs to make appear/disappear options are missing,while it's ok for Maximus 9 and 10 bioses).

Thanks.

@Lost_N_BIOS many thanks man, bioses are working well.
Hopefully later this day I can send you screenshots of my bios menus showing all the visible settings.
Also another thing man, the modded bioses you sent are using my motherboard ids or are just standard bioses?

Thanks again for your patience and help 😁

@Doc.Brown - OK, look forward to helping you on the thread once you make it.
For some BIOS edits, yes, in some ways I use AMIBCP, but generally not for any actual edits. I use it mainly to inspect options easier/quicker, but main edits or changes I would make in AMIBCP I make directly in the AMITSE/SetupData module or Setup Module instead
Setup module holds some stock setting values, and any textual changes you make in AMIBCP, AMITSE/SetupData holds any settings changes you make (ie Access Level or Failsafe/Default setting)
For any BIOS you can't open properly in all AMIBCP versions publicly available then above edit method is the only way to do it, latest version I know of is 5.02.0031 and if your BIOS doesn't open in that then you'd have to use above direct edits.

@Cancretto - Great BIOS still working well for you! If you flashed the BIOS using USB Flashback, then all your original board specific info will be retained in place (UUID, Serial, LAN MAC ID etc)
You're welcome!

Zitat von Lost_N_BIOS im Beitrag #101

---

@Doc.Brown - OK, look forward to helping you on the thread once you make it.
For some BIOS edits, yes, in some ways I use AMIBCP, but generally not for any actual edits. I use it mainly to inspect options easier/quicker, but main edits or changes I would make in AMIBCP I make directly in the AMITSE/SetupData module or Setup Module instead
Setup module holds some stock setting values, and any textual changes you make in AMIBCP, AMITSE/SetupData holds any settings changes you make (ie Access Level or Failsafe/Default setting)
For any BIOS you can't open properly in all AMIBCP versions publicly available then above edit method is the only way to do it, latest version I know of is 5.02.0031 and if your BIOS doesn't open in that then you'd have to use above direct edits.

@Cancretto - Great BIOS still working well for you! If you flashed the BIOS using USB Flashback, then all your original board specific info will be retained in place (UUID, Serial, LAN MAC ID etc)
You're welcome!

---

@Lost_N_BIOS hi man, here I made screens of all the visible settings of your modded 0805 bios
https://www.mediafire.com/download/mywnhuuz9e9h42y

Tell me if you need anything else

@Doc.Brown - it's not as hard as it looks, it's only looks intimidating when you haven't played around in there before.
I explained a little how this works here, and included image of an edit example. It may not directly apply to your BIOS I'd have to check, I mean the values used for User/Super/Default, those vary between some BIOS types or BIOS series etc
[Request]Maximus XI Hero - Unlock AMIBCP

@Cancretto - thanks, I will work on this for you as time permits - OMG @ 100MB of images!?!

Zitat von Lost_N_BIOS im Beitrag #104

---

@Doc.Brown - it's not as hard as it looks, it's only looks intimidating when you haven't played around in there before.
I explained a little how this works here, and included image of an edit example. It may not directly apply to your BIOS I'd have to check, I mean the values used for User/Super/Default, those vary between some BIOS types or BIOS series etc
[Request]Maximus XI Hero - Unlock AMIBCP

@Cancretto - thanks, I will work on this for you as time permits - OMG @ 100MB of images!?!

---