My dump was also done with asprogrammer

So it’s safe

You can just mod my bios that I uploaded

Here are the pics you wanted too

Also my manufacture doesn’t give out bios to the customer.

So I will just use this as the base to be unlocked on

@liteon6x - Good you used asprogrammer
I need to see top of ADV too, and please resize images to 800-1000 px wide
Yes, OK, I will edit your dumped BIOS as-is then

Here is the picture

@liteon6x - Thanks, also need to see image of boot
Sorry I didn't remind you in last reply, I just noticed while getting ready to do the mod

No prob

Thanks for all the sideways images I only needed boot, but I know why you posted the others, my bad, sorry!
OK, I have to run right now, but I will make this for you first thing tomorrow

Lol, sorry took with my phone.

See you later

Thank you

Hi Lost_n_BIOS,

I provided the wrong url. I will try to post the archive (7.7 MB) as soon as I figure out where <g>. BUT, the correct URL to get to the page with the archive for download is https://opowered.com/lp1-support.html. I just tried it. I am attaching the three pictures (sum of the images is about 120 KB). The bottom of the Advanced Page cuts off the listing for the AMIBIOS : "V 2.20.1271 American Megatrends Inc (c) 2018".

@liteon6x - Thanks! here is your unlocked BIOS Flash it back via >> FPTw.exe -bios -f digitalstormUnlock.bin
http://s000.tinyupload.com/index.php?fil...851883438369383

*** WARNING - To ANYONE with laptop and unlocked BIOS!!!! ***
DO NOT try to enable this graphics card or disable that card, switch cards etc. Otherwise you will end up with no display output (ie black screen) and no way to recover except by blind flash or with flash programmer.
You can change graphics related settings, like changing memory sizes, or core speeds etc, just don't try to disable one card or change which is main etc.
Additionally, be very careful when trying to undervolt CPU, you can leave BIOS unbootable due to CPU voltage too low (Sometimes even 0.05 is too much)

*** WARNING *** - This BIOS is user specific! If you are not user liteon6x at Win-RAID.com forum, DO NOT USE THIS BIOS!!
If you do, and you are not liteon6x, then you will loose your serial, UUID, OG NVRAM, and possibly LAN MAC ID as well.
You have been warned!!!

@stevesr0 - Oddly, I now see the issue with the link! The link in post #670 = www.opowered, and the link only works if I remove the www (their site has no www on my browser either)?
Maybe this site auto-added the www when creating the dropped hotlink? We shall see below This is something their site coders should have coded a redirect link for the site to fix on page hits by default

https://www.opowered.com/drivers/OP-LP1/BIOS/intel_CFL_GK5N4Z5Z_ESI_BIOS_N.1.00_EC1.33.09_20180903.zip << at post #670
https://opowered.com/drivers/OP-LP1/BIOS/intel_CFL_GK5CN4Z5Z_ESI_BIOS_N.1.00_EC_1.33.09_20180903.zip  << From Opowered site
 

https://opowered.com/drivers/OP-LP1/BIOS...09_20180903.zip << Test dropped correct non-www link to see if our site changes it (* Edit, nope, our site didn't add, must have been your browser or something?)

Anyway, I got it now, thanks for the link and images, I will work on your BIOS shortly
Ohh! I also need to see the settings on bottom of ADV too, scroll down, thanks

Hi Lost_N_BIOS,

If you have the files you can ignore my pm asking for your email address so you could download the archive I posted on a site for you.

stevesr0

Yes, I just replied to that, and was confused on what was going on there
I got the zip from opowered site once I had correct link from you for the main download page.

Can I use the CH341A dongle with Asproggrammer to write the firmware

can I just do a straight write or do I need to erase ic the choose write ic if I can use asprogrammer?

@liteon6x - Ohh yes, sorry about the FPT comment, I forgot you dumped entire BIOS. Yes, write it back just how you dumped it
For any write, always >> Erase >> Blank Check >> Open file >> Write >> Verify

Zitat von Lost_N_BIOS im Beitrag #688

---

@liteon6x - Ohh yes, sorry about the FPT comment, I forgot you dumped entire BIOS. Yes, write it back just how you dumped it
For any write, always >> Erase >> Blank Check >> Open file >> Write >> Verify

---

@liteon6x - Great to hear the write went smoothly!! And thanks for the quick report back
If you want to use XMG BIOS, you need to flash over to XMG BIOS + matching EC FW for that BIOS version.
And no, any flash you do other than the unlocked BIOS I sent you then we'll have to dump and do the unlock again.

Thanks for asking, I do not do paypal, but I will send you donate info in case you want send something my way via one of the methods that work for me!

Merry Christmas & Happy Holidays to ALL, and I wish you all a wonderful New Year as well!