@painsiy - I thought maybe so, but it's so huge I can't download just to check it for BIOS version.
Update BIOS then reboot and immediately update EC FW.

Or, you can do like this, similar system/process, but you'll have to adjust for file names etc - https://www.reddit.com/r/motile/comments...eeding_windows/

Yes, your FPT backup would be backup you could use to go back, if you ever needed to, and or for BIOS recovery with programmer if you ever needed to (but, someone would need to rebuild BIOS for you)
And for the last part I mentioned, you should dump the following as well, just so you have
FPTw.exe -desc -d FD.Bin
FPTw.exe -ME -d ME.BIN << May error/not let you
FPTw.exe -gbe -d gbe.bin <<< May error, if not present

Hi Lost_N_BIOS, I have a evoo lp6 and I'm a bit scared of modifying the bios. Could you please modify mine?
My bios link mediafire/file/u05zfxuuka94ecp/biosreg.zip/file

@NoHope - Here you go
http://s000.tinyupload.com/index.php?fil...564497423703978

*** WARNING - To ANYONE with laptop and unlocked BIOS!!!! ***
DO NOT try to enable this graphics card or disable that card, switch cards etc. Otherwise you will end up with no display output (ie black screen) and no way to recover except by blind flash or with flash programmer.
You can change graphics related settings, like changing memory sizes, or core speeds etc, just don't try to disable one card or change which is main etc.
Additionally, be very careful when trying to undervolt CPU, you can leave BIOS unbootable due to CPU voltage too low (Sometimes even 0.05 is too much)

*** WARNING *** - This BIOS is user specific! If you are not user NoHope at Win-RAID.com forum, DO NOT USE THIS BIOS!!
If you do, and you are not NoHope, then you will loose your serial, UUID, OG NVRAM, and possibly LAN MAC ID as well.
You have been warned!!!

@Lost_N_BIOS Hello! I have a chinese laptop - Hasee KingBook X57S1, seller told me it's Tongfang based-one laptop, but i am not sure about that. I did unlock for advanced settings (Chipset / Advanced settings > just changed in AMITSE module to hide Menu / Security pages and put on their places Advanced / Chipset). And i saw, that you managed to unlock all the pages and keep old one in BIOS too. Is it possible to do in my case too?

Link to the FULL dump from FTP tool (including updated ME and GOP/desc/BIOS/unhidden Advanced/Chipset) - https://yadi.sk/d/FXNQdWVlymX0sQ
Link to ONLY BIOS dump from FTP tool - (updated GOP/unhidden Advanced/Chipset) https://yadi.sk/d/XSowJz5JwB8EzA
Link to vendor latest BIOS update (FULL) (with old GOP/ME/and locked advanced settings) - https://yadi.sk/d/NXuZ-9DpglojRQ

@b0ltun - Hey! Yes, probably I can, but I would not want to edit your BIOS that you already edited.
Please reflash stock BIOS using stock method, then send me FPT dump of clean unedited BIOS region >> FPTw.exe -bios -d biosreg.bin
With this, please include one image of each main BIOS page (ie main, advanced if there, security, boot, exit etc) Please resize these images to 1000px wide or so, 100-300kb max is all that's needed) - Put all with BIOSreg.bin in max compressed zip

So, what needs unlocked here, stock BIOS does not have Advanced and Chipset I assume, correct? Maybe add Overclock Performance menu too, yes?
I don't see two advanced, or two boot etc, in the BIOS, so I assume you don't need to keep the some advanced and unlock some hidden one (just unlock ADV and Chipset, correct?)

The BIOS you linked (last link, vendor latest) I checked. No, this does not look at all like any Tonfang based BIOS, but yes, I can unlock for you
There may not be room to add all three (Advanced, Chipset, Overclock Performance Menu), without swapping for some sections you may not use (like Main or Security, like you already mentioned doing)
So, due to this ^^, I may not be able to help you more than you already know how to do. It's due to the way they structured AMITSE, didn't leave enough empty places at the menu areas, but we may be able to do without adding there, will have to test and see.

Zitat von Lost_N_BIOS im Beitrag #575

---

I don't see two advanced, or two boot etc, in the BIOS, so I assume you don't need to keep the some advanced and unlock some hidden one (just unlock ADV and Chipset, correct?)

---

@b0ltun - Please do images as I asked, I am on limited internet, thanks.
Please resize images to 800-1000px wide, and put all images + BIOS region into one max compress zip. You may not be able to attach here, it's OK, upload to any free file host.

OK, I will first make you BIOS try to keep them all, not sure if there is enough empty places, but we'll try something like that first
Then if no luck we can swap as you did >> Main / for ADV, Security / For Chipset + Add Overclock Performance Menu (There is one empty place for sure)
And yes, any menu you replace, settings will be left at default (or we can change first, or later, if you needed)

OverClocking Performance Menu is inside "Setup", two entries above "Chipset", look at the BIOS in AMIBCP, you will see it

Zitat von Lost_N_BIOS im Beitrag #577

---

@b0ltun - Please do images as I asked, I am on limited internet, thanks.
Please resize images to 800-1000px wide, and put all images + BIOS region into one max compress zip. You may not be able to attach here, it's OK, upload to any free file host.

OK, I will first make you BIOS try to keep them all, not sure if there is enough empty places, but we'll try something like that first
Then if no luck we can swap as you did >> Main / for ADV, Security / For Chipset + Add Overclock Performance Menu (There is one empty place for sure)
And yes, any menu you replace, settings will be left at default (or we can change first, or later, if you needed)

OverClocking Performance Menu is inside "Setup", two entries above "Chipset", look at the BIOS in AMIBCP, you will see it

---

@Lost_N_BIOS Sorry!! I did wrong dump again, heh. I just checked, that's it was an attempt to unlock. I did clean reflash vendor bios and dumped again. Sorry for that mistake!

So, BIOS above (post #579) is after clean stock BIOS flashed?

Zitat von Lost_N_BIOS im Beitrag #580

---

So, BIOS above (post #579) is after clean stock BIOS flashed?

---

@b0ltun - Thanks for confirmation. First, lets test this, please test and let me know if you can see Advanced + Chipset.
I know how to easily enable them, but they may not show up here, this is me testing something to see if we can make them appear without having to swap anything, and leaving one open space in AMITSE so we can add Overclock Performance Menu
Only explaining above, so you don't think I don't know what I'm doing, if you end up not seeing ADV/Chipset here
Please test in the following order, once you see Advanced + Chipset, stop and let me know which.
If none show it, then we will have to do swapping, in order to have room for Overclock Performance menu.
1. SetO
2. SetAMITSDU
3. SetAMITSDS

http://s000.tinyupload.com/index.php?fil...438614036266163

@Lost_N_BIOS No one worked, only defaults pages appear :(

@b0ltun - OK, sorry to see! This means we'll have to use swap method, there is only room to add one additional.
So, this is OK for you >> Swap - Main / for ADV, Security / For Chipset + Add Overclock Performance Menu

* Edit - If yes, above is OK >> Here, I think all three should be visible this way - http://s000.tinyupload.com/index.php?fil...278072297796787
If you do not see Overclock Performance let me know and I will change it's Access Level to User/Super, or add it into one of the other menus as a submenu instead

please i need a backup of bios of a Overpowered OP-LP3 to see if I can make my laptop image since the backup I did does not give me an image and in the analyzer it says "Intel BIOS image detected!: D
The ME / TXE region is corrupted or missing ", I made the backup with an external programmer a ch341" hazing ", I thank you in advance