@Lonely wolf - Great, thanks! Looks like you're all unlocked already, so no more hassles for you
Here is your unlocked BIOS, flash it back via >> FPTw.exe -bios -f biosregm.bin
http://s000.tinyupload.com/index.php?fil...221721219646144

*** WARNING - To ANYONE with laptop and unlocked BIOS!!!! ***
DO NOT try to enable this graphics card or disable that card, switch cards etc. Otherwise you will end up with no display output (ie black screen) and no way to recover except by blind flash or with flash programmer.
You can change graphics related settings, like changing memory sizes, or core speeds etc, just don't try to disable one card or change which is main etc.
Additionally, be very careful when trying to undervolt CPU, you can leave BIOS unbootable due to CPU voltage too low (Sometimes even 0.05 is too much)

*** WARNING *** - This BIOS is user specific! If you are not user Lonely wolf at Win-RAID.com forum, DO NOT USE THIS BIOS!!
If you do, and you are not Lonely wolf, then you will loose your serial, UUID, OG NVRAM, and possibly LAN MAC ID as well.
You have been warned!!!

@Lost_N_BIOS Thank you again :D

@Lonely wolf - Your're welcome! Anytime you need BIOS mod, let me know and I can usually do

Zitat von Lost_N_BIOS im Beitrag #389

---

@shtooka
So, you're using this BIOS then >> XMG-NEO-15-M18-XNE15M18-GK5CN6X_N.1.09?

---

@shtooka - Not sure what you're talking about doing there with PEIOverclock etc, but it does not sound ideal, and will = bricked BIOS. NVRAM yes, probably contains the failed settings, but other stuff likely corrupted as well.
Don't worry, I will make you working BIOS, I just have not yet because I needed to be sure what base BIOS you were using. Please wait, I will make fixed and unlocked BIOS for you now

* Edit - @shtooka - Please FPT flash this in, or program in BIOS region only if you want, then boot to windows twice, then dump the BIOS and send back to me. This allows the NVRAM to rebuild and re-populate out from stock
For the dump, you can also dump back to me BIOS region only with FPT if you want (FPTw.exe -bios -d biosreg.bin), then we'll fix serial etc
First, use the one named FixStockUnlockedPad.bin, if that is not bootable, then use FixStockUnlocked.bin instead.
http://s000.tinyupload.com/index.php?fil...377479307412690

Zitat von Lost_N_BIOS im Beitrag #395

---

Please FPT flash this in, or program in BIOS region only if you want

---

HELLO I HAVE THAT LAPTOP AND WHEN TRYING TO CHANGE THE VOLTAGEF I PUT -250MV INSTEAD OF -150 AND NOW THE LAPTOP IS ON, BUT IT DOES NOT GIVE AN IMAGE AND I DON'T KNOW WHAT TO DO HELP

@wsjbw Try to press 1 min a power button, it will reset a CMOS without disassembly. But in case with voltage fault im afraid you have a problem like mine if CMOS reseting not working. I have once trouble with 150mv undervolting, but at 10 time booting i can reach bios and reset, because it was not very low value, CMOS reset is not helping to me.

so I let it reboot 10 times with no image? When I seemed to press the button for 1 minute, it didn't work, nor will it be the NVRAM? really this is a problem everything is perfect except the screen

Tongfang GK7CP6R XMG Core 17 (Core i7-9750H, GeForce GTX 1660 Ti, 144-Hz Display)

@wsjbw That worked for me, because undervolt was not too low and in one out of ten booting cases i can be able reach a BIOS settings. And CMOS reset is not help for me as i remember. Try to remove batteries then. If not help, you need a programmer.

Should I disconnect the battery from the laptop and the cmos? Then connect it to power and do the process you mentioned before?

@wsjbw You can try, i didnt know about this method. Just when power is off, memory with settings will be reseted like RAM after a some time.

I found information on the manual and the Bios Stock on the laptop page, but I suppose you should use one per range to reset the VMRAm and remove the chip from the laptop, right?

@wsjbw Im not fully understand you, but in case if CMOS reset not helping, you need a programmer ch341a+soic8(sop8). Chip removing is not needed, just connect directly with it(im not sure about your laptop model, better to ask somewhere in your model topic or Lost_N_BIOS with photo and chip name).

Sure bro just let me try, i got the Origina BIOS.rom and that tools its comming the next week, After that I write to see how it went THANKS!