@Lost_N_BIOS Ok need a little bit time, I need to organize a secound USB flash drive 😂

update:

-->> grub with setup_var command --> no problem


-->> then reboot with CMD + ALT + DEL and boot into DOS --> no problem
-->> FTP the ME.bin --> Error 238: CPU has no write access to target flash area...


tried 3 times all the same result, Secure Boot is disabled, somehow the ME version number is back again, but I noticed under Windows 10 the task "System" (ntoskrnl.exe) is constantly causing ~10% load, which leads to higher idle CPU package power consumption and 10°c temperature hotter, the CPU speed never goes below 3.8Ghz

@zamroc9 - You're welcome! Let me know if you need help with any other BIOS issue, I can usually help

@37_ disable secure boot already? If yes, don't use Rufus, make a Win98 SE disk instead, or don't use MBR Rufus options, or don't use UEFI Rufus options etc.
Here's how to make Win98SE USB Boot, follow steps 1-2 ONLY, then copy in there your FPT files and ME.BIN - <Request> Flagship X470 Gaming 7 Wifi Motherboard BIOS Fix

Grub was no problem? I mean, did you test this with current variable, just to see if you get same error as previous (not able to set variable)? You can test now, if you want, for the sake of testing, it will just be reset after you reboot
I ask this because, in the end, due to your previous no luck with grub and setup_var, it may just be easier for you to set this via RU method (and while there, you can also disable BIOS lock variable too if you want )

@Lost_N_BIOS grub was no problem at all, but FTP has Error 238, see my edit above

Sorry, I thought you said you had problem to use grub previously, you couldn't set BIOS Lock variable? Or sorry, maybe I confused you with other user, or maybe even other user in other thread (I get lost in here sometimes )
So nice, looks like ME is now working! Please confirm with HWINFO64 >> DOWNLOAD HWINFO64 HERE
See image below for where to check ME FW version, if you see version # properly and not 0.0.0.0 or N/A or missing ME FW entirely in this section, then ME FW is OK and must have been all along (maybe some glitch had it disabled)?
Or, maybe it was only messed up, until you flashed in the proper mod BIOS I made you? Anyway, if ME FW shows up properly here, nothing to do, all is fixed and OK

No Problem, with all the help requests to you it's fully normal to get lost 😁

ME version is showing normal, but the CPU is constantly at 10% load caused by SYSTEM, I'll google it how to solve this issue.

@37_ Yes, ME FW looks good now Ha, yes, thanks for understanding, I think I was thinking of these guys, few of them in last page or two had issues tonight with setup_var - Gigabyte Aero 15 OLED BIOS Unlocking and Modding Issue (8)

Sorry, not sure about 10% system, could be ANY number of things. You may need to do diagnostic startup using only system services first and see if issue still there, if not, then add everything else back one by one.
You might be able to see what it is from task manager properties, expand until you get right to the item, and then right click and open file location or go to service etc - that may help you find it.
Aside from that, check startup items, clear temp folders etc, run spyware/adware scans etc.

@Lost_N_BIOS, greetings! Can you unlock bios for my laptop? I have original Tongfang GK7CP0 chassis flashed with last bios from XMG Neo 17 (XNE17M19), it works fine without any problems from december 2019.

Here is link for original bios from XMG: https://download.schenker-tech.de/package/xmg_neo17xne17m19/ (EC and BIOS for XMG_NEO_M19_RTX2060)
Link to my actual FPT dump: http://www.mediafire.com/file/xu26omk5wq724c7/biosreg.bin/file

The Result of FPT Dump and reflash:


Bios screenshots:


I hope on your help, thanks.

@KORD_12.7 - Here is unlocked BIOS, flash via >> FPTw.exe -bios -f biosregmunlock.bin
http://s000.tinyupload.com/index.php?file_id=98742980516115445869

@Lost_N_BIOS thanks for your help. I flashed your modified bios without errors, but... there is no "Add Main 2", "Adv 2", "Chipset", "Boot 2" options .
But i see some differences in "Advanced". I tried to load optimized defaults, but it doesn't help

Screens:

@KORD_12.7 - Very sorry about that, seems I forgot to insert the main mod file and thought I did before I did final rebuild
Here, all should be correct now, apologies again for the mix-up!
http://s000.tinyupload.com/index.php?fil...932894145529865

*** WARNING - To ANYONE with laptop and unlocked BIOS!!!! ***
DO NOT try to enable this graphics card or disable that card, switch cards etc. Otherwise you will end up with no display output (ie black screen) and no way to recover except by blind flash or with flash programmer.
You can change graphics related settings, like changing memory sizes, or core speeds etc, just don't try to disable one card or change which is main etc.
Additionally, be very careful when trying to undervolt CPU, you can leave BIOS unbootable due to CPU voltage too low (Sometimes even 0.05 is too much)


*** WARNING *** - This BIOS is user specific! If you are not user KORD_12.7 at Win-RAID.com forum, DO NOT USE THIS BIOS!!
If you do, and you are not KORD_12.7, then you will loose your serial, UUID, OG NVRAM, and possibly LAN MAC ID as well.
You have been warned!!!

@Lost_N_BIOS, now it's perfect, thanks a lot!

@KORD_12.7 - Great to hear it, thanks for quick test and report back

Is there a modded bios for the Evoo LP6?

@Inori - What is your LP6 TongFang model (example = GK7CP0S)? Anyway, probably not, all BIOS here are user/system specific, you have to dump your BIOS and send to me and I will mod for you.
Please link me to the stock BIOS download page if you can, and then do below. Also, show me image of Advanced >> Lighting Option (select/open this), that way I can see first and last lighting choice given to you, so I know which one is visible/hidden so I can add other one for you

Thank you. Mine comes in tomorrow. I'll make sure to dump it right away thanks again