@Lost_N_BIOS Sir I uploaded eveything I was using for updating the ME firmware, you can check fit.log what files was used

@37_ - See my edits on previous page. Thanks for fit_log! Yes, you did not follow guide properly. You opened base stock ME FW as source (12.0.64.1551_CON_H_BA_PRD_EXTR.bin), this is incorrect and cannot ever lead to proper ME FW for your system. This file is never opened with FITc during the ME FW Update or cleaning process
You could have used 12.0.64.1551_CON_H_BA_PRD_EXTR.bin and FWUpdLcl.exe tool to simply update your ME FW, but 12.0.64.1551_CON_H_BA_PRD_EXTR.bin is never opened with FITc program during any point in the guided process. This is why your ME FW is corrupted, guide was not properly followed.

Anyway, lets try to fix without you having to do pinmod, if we cannot get it fixed, then pinmod or flash programmer is your only way to fix this.
OK, I found Evoo gaming laptop 15" EG-LP5-BK and Overpowered V 2.0 is same model GK5CP6X, so we can use it's ME FW / BIOS as base to fix your ME FW. Please wait, while I write out instructions for you and fix/update a ME FW for you.

First, flash in that mod BIOS I sent you and do as mentioned at post #264, so you can get windows back up and running, then let me know once you are done

@Lost_N_BIOS Hello, I have an evoo LP4 laptop and would greatly appreciate your help unlocking the BIOS to enabling settings like deeper C-states and PEG Port ASPM.
Here is my biosreg file :https://mega.nz/file/3EBlmK7B#ZoJjxf0Xkk...mr_0Tqw4w2L8YWE

@zamroc9 - Did you already disable BIOS Lock? And what is the full model name for this system?
Or, can you already write back BIOS region with FPT without issue? >> FPTw.exe -bios -f biosreg.bin
= success?

@37_ see my edit above

@Lost_N_BIOS the prober bios file from post #264 can not be flashed... see log attached

@Lost_N_BIOS I did not disable the lock. The device is EVOO-EG-LP4 or a Tongfang GK5CP5X

@37_ - do not reboot! Show me the full window, so I can see the title bar AND the command you entered. Very odd, I've never seen such FPT error.
Flash back whatever known working dump you have, if it's OK and success, then you can reboot again, if not, DO NOT reboot or = brick

Looks like you entered wrong command! Actually, DO NOT Reboot at all now! Please show me full CMD window, including the title bar and command you used
That probably happened because your ME FW is corrupted, and you cannot load ME driver, so should not use FPT in windows. Did you flash previously in windows, AFTER you seen ME FW was corrupted?
Or, could just be wrong command, not sure, can't see everything I need to see

@zamroc9 - thanks, please test above mentioned bios region write back at post #274, do you get success or error 280/368?

@knowsthedose @TheRiddick - Can either of you dump ME FW region for me? Please try, thanks!
FPTw.exe -me -d me.bin

If not, do either of you have a stock BIOS package, or know where a full BIOS dump is for your model? Thanks!

It works. I used it to get the bin file.

@Lost_N_BIOS Ok I finished flash the proper modded bios

strange, I moved the entire folder to D: and tried again, now finished without error...

@zamroc9 - dumping BIOS is not same as writing BIOS, please do as mentioned at post #274 and let me know.
We usually have to disable BIOS lock before you can flash in mod BIOS, but not always, this is how we test,

@37_ great to see it! I was wondering about folder location, but your desktop shouldn't have been an issue, unless maybe that underscore in folder name caused some problem?
Looks OK, you can reboot now, and then again flash in the mod BIOS (if the flash above is not the mod BIOS flash-in)

I cannot find stock complete BIOS package for your model or, EVOO/Overpowered LP5, or Z7-CT7 GK, or Infinity X5-9G6-88, all use same TongFang GK5CP6X BIOS
So, if the above two users I tagged can't dump ME FW, we cannot fix your ME FW until we find someone with one of the above systems and a flash programmer can dump BIOS for us
Even if you had a flash programmer now, we can't fix, no base ME FW source to make you proper configured for your system ME FW

@Lost_N_BIOS Sorry for the misunderstanding I used the "FPTw.exe -bios -f biosreg.bin" command and it was successful. Thank you.

@zamroc9 - Great you got what I meant, and now tested with success! This means you don't have to do anything to flash back in mod BIOS now, please wait, I will make you unlocked BIOS now

@Lost_N_BIOS I sent you a PM, take your time Sir I hope you can find everything you need there!

@zamroc9 - Here is your unlocked BIOS, flash back via >> FPTw.exe -bios -f biosregm.bin
http://s000.tinyupload.com/index.php?fil...744118704204842

*** WARNING - To ANYONE with laptop and unlocked BIOS!!!! ***
DO NOT try to enable this graphics card or disable that card, switch cards etc. Otherwise you will end up with no display output (ie black screen) and no way to recover except by blind flash or with flash programmer.
You can change graphics related settings, like changing memory sizes, or core speeds etc, just don't try to disable one card or change which is main etc.
Additionally, be very careful when trying to undervolt CPU, you can leave BIOS unbootable due to CPU voltage too low (Sometimes even 0.05 is too much)

*** WARNING *** - This BIOS is user specific! If you are not user zamroc9 at Win-RAID.com forum, DO NOT USE THIS BIOS!!
If you do, and you are not zamroc9, then you will loose your serial, UUID, OG NVRAM, and possibly LAN MAC ID as well.
You have been warned!!!

@37_ - Thanks, I will check it now

* edit - @37_ - Please make DOS Bootable USB, and disable secure boot in BIOS @ Security Page
Copy all contents of V12 FPT DOS folder to root of USB (nothing in folders), then copy this ME.BIN also to root of USB - http://s000.tinyupload.com/index.php?fil...276192352676748

Make second USB to boot go grub, then boot to grub and do the following to enable ME FW Re-Flash (case sensitive) >>
setup_var 0x8F1 0x01

Then CTRL-ALT-Del and on startup hit boot menu hotkey and boot to DOS immediately, do not reboot to DOS from windows, or let machine reboot twice etc (or you will have to redo this)
As it's rebooting from CTRL-ALT-Del above, swap Grub USB to DOS USB and boot to DOS as mentioned. Do this fast, so USB is loaded, or have both USB installed during this whole time, just be sure to boot to DOS directly after you CTRL-ALT-Del above

At DOS prompt >>
FPT.exe -me -f me.bin
FPT.exe -greset

If you get error (Show me error or tell me error #), reboot and try ALL again, probably lost setup_var change, it only remains for one boot, if system is booted twice it's reset.
If you get error and cannot set the variable at grub, then you will have to use RU method I mentioned here - Gigabyte Aero 15 OLED BIOS Unlocking and Modding Issue (8)
If you use the RU method, this will hard set this setting, so ME FW will be disabled, and you will need to redo this and set 0x00 to Disable this setting instead of 0x01 once you are done, after the FPT flash, then ME FW will be enabled.

@Lost_N_BIOS Thank you!