Forum - RE: How to get XP installed onto an Intel 9-Series chipset AHCI system?

#31 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Mon Apr 13, 2015 12:15 am

... a small step forward :)
Now the problem is, the Installation cannot see the HD. But at least I do not get the driver error anymore...

reply

#32 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Mon Apr 13, 2015 8:49 am

Zitat von ostatit im Beitrag #31
Now the problem is, the Installation cannot see the HD.

This message indicates, that you haven't loaded/integrated the appropriate textmode driver for the on-board SATA Controller, which is managing the target HDD.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#33 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Fri Apr 17, 2015 12:21 pm

hello? Do you know how to get XP installed onto Intel 8-Series chipest AHCI system? I have a notebook computer ,and it's HM87,and I can't find any AHCI for HM87 on internet.(sorry , I can't write better because I'm not pass the CET-4,I'm chinese)

reply

#34 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Fri Apr 17, 2015 12:36 pm

Just a little question? Why do you want XP on such a PC?
XP is dead. D-E-A-D! It should have died with the release of .Net Framework 3 or Windows 7!
But it is still alive... somehow.

Install Windows 7 and virtualize XP. Or install Linux and virtualize XP.
There is enough power to do this und you know it! And it is very simple, too.

1 year since the end of support and people are still riding a dead horse.

Unsecure link removed by Fernando

reply

#35 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Fri Apr 17, 2015 12:55 pm

Oh， you are right.Just for fun...

reply

#36 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Fri Apr 17, 2015 2:02 pm (Last edited: Fri Apr 17, 2015 2:09 pm)

@ liuxiaohei:
Welcome at Win-RAID Forum!

Zitat von liuxiaohei im Beitrag #33
Do you know how to get XP installed onto Intel 8-Series chipest AHCI system? I have a notebook computer ,and it's HM87,and I can't find any AHCI for HM87 on internet.

Here is what I recommend to do:

Boot into the Windows OS, which is currently running on your notebook, and check the DeviceID of the Intel SATA AHCI Controller (right click onto it > "Properties" > "Details" > "Property" > "HardwareIDs").
Go >here< and download the listed "Universal 32bit Intel RST textmode driver v11.2.0.1006 mod by Fernando".
Integrate the driver according to my guide (see above link). When you get the list with all supported Intel SATA Controllers, just highlight the "Intel(R) 8 Series Chipset Family Mobile SATA AHCI Controller" with the matching DeviceID (see point 1).
Follow the instructions of my guide (see above link).
Enjoy Windows XP

Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#37 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Fri Apr 17, 2015 2:03 pm

thank you !

reply

#38 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Wed May 27, 2015 1:12 am (Last edited: Wed May 27, 2015 1:18 am)

To all people, who say XP is dead, please consider there are sometimes critical imporant software which is not ready for new OS, or which is very very expensive like in my case.

Im still using XP in H97 board series with fast SSD and HDD in AHCI mode which is very stable and fast, so im very happy.
Please look at my first post how to do it.

In my opinion best is install XP in IDE mode, because its hard to do it in AHCI mode - and change it after OS install with Fernando's driver.
Im almost sure it can be possible also with old installed earlier XP windows, but please remember, when you do it wrong (its easy to do mistake) system dont wake up anymore.
So i reccomend to do copy and try it with not important OS system (install new XP OS for example) before change IDE to AHCI.

Thank you Fernando one more time :D.

reply

#39 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Wed May 27, 2015 11:07 am

@ dr_aus:
Welcome at Win-RAID Forum and thanks foir your contribution!

Zitat von dr_aus im Beitrag #38
In my opinion best is install XP in IDE mode, because its hard to do it in AHCI mode - and change it after OS install with Fernando's driver.

The question is: How did you manage the switch from IDE to AHCI mode?

According to my knowledge this is the simpliest way without touching the registry (Pre-condition: You should know the exact DeviceID of your on-board Intel SATA AHCI Controller):
1. Install XP with integrated SP2 or (better) SP3 in IDE mode.
2. Run the Device Manager and expand the "IDE ATA/ATAPI Controllers" section.
3. Right click onto the listed Intel SATA Controller (if you see more than 1 Controller, check the HardwareIDs to find the Intel one = VEN_8086).
4. Choose "Update Driver Software" > "Browse my Computer..." > "Let me pick ..." and hit the button "Have Disk".
5. Navigate to the folder, where you have stored the "Universal 32bit Intel RST AHCI & RAID driver v11.2.0.1006 mod by Fernando" and hit the file named iaAHCI.inf.
6. Disregard the warning, that no compatible device could be found.
7. When you get the list with all available Intel SATA AHCI Controllers, choose the one, which suits your system (according to the DeviceID).
8. Let the OS install the driver (disregard all warnings).
9. Choose to reboot, but enter the BIOS instead of letting the system finish the reboot (otherwise you will get a BSOD).
10. Set the Intel SATA Controller to "AHCI".
11. Save the changed BIOS setting and reboot.
12. Enjoy Windows XP in AHCI mode.

Did you do it this way?

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#40 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Sun Aug 23, 2015 2:57 pm (Last edited: Sun Aug 23, 2015 3:59 pm)

Hello i have Asus Z97-Pro motherboard and follow your guide but get
" the file iastor.sys is damaged "

And with a clean CD of windows xp profesional sp3 i get :
the bios in this system is not fully acpi compliant

So what i can do ? i really needs xp os on my new pc

my skype: madocter

reply

#41 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Sun Aug 23, 2015 4:08 pm

@ miguelitito:
Welcome at Win-RAID Forum!

Zitat von miguelitito im Beitrag #40
Hello i have Asus Z97-Pro motherboard and follow your guide but get " the file iastor.sys is damaged "

This message indicates, that you have tried to install a 64bit driver into a 32bit OS or vice versa a 32bit driver into a 64bit OS.
Which guide did you follow and which driver did you install/load/integrate?
>Here< is the guide about how to inegrate an Intel textmode driver into a Windows XP CD. This method works even with Intel 9-Series Chipset AHCI and RAID systems.

Zitat
And with a clean CD of windows xp profesional sp3 i get :
the bios in this system is not fully acpi compliant

How did you try to install XP? Which "Compatibility Support Modudule" (CSM settinghave chosen within the BOOT section of the UEFI BIOS?

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#42 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Sun Aug 23, 2015 5:37 pm (Last edited: Sun Aug 23, 2015 5:42 pm)

i think i didnt mistaked with 32/64 bits . i will try again

#

CMD is enabled on my bios but i dont know how i can launch cd using cms mode or uefi ...

reply

#43 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Sun Aug 23, 2015 5:52 pm

Zitat von miguelitito im Beitrag #42
CMD is enabled on my bios but i dont know how i can launch cd using cms mode or uefi ...

"CSM" has to be enabled, "Fast Boot" has to be disabled and all LEGACY options have to be enabled.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#44 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Sun Aug 23, 2015 6:27 pm (Last edited: Sun Aug 23, 2015 6:31 pm)

CMS is enabled , i didnt saw LEGACY option at bios , disabled APM options , and others that could conflict with OS installation . i've integrated the x64 correct driver on windows 2003 x64 now get :

"the bios in this system is not fully acpi compliant"

I setup advanced / pch storage configuration / sata mode selection : IDE and SATA but nothing .

My skype is : madocter can you giveme a hand there i can even make a donation for your work and time sspent on me

reply

#45 | RE: How to get XP installed onto an Intel 9-Series chipset AHCI system? datum

Sun Aug 23, 2015 6:46 pm

Zitat von miguelitito im Beitrag #44
i didnt saw LEGACY option at bios

look into the "BOOT" section for something like "Addon ROM display" and "Launch Storage OROM policy".

Zitat
"the bios in this system is not fully acpi compliant"

Within the "Advanced" UEFI BIOS screen there should be a section "ACPI Configuration". If these settings do not help, press F5 or F7 when prompted to hit F6 at the beginning of the OS installation.

Zitat
My skype is : madocter can you giveme a hand there i can even make a donation for your work and time sspent on me

I don't have the time for doing any private support.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.