@Lost_N_BIOS Hello again. I took some pictures and have uploaded them to imgur for you. The file sizes are quite small 100KB or less. Let me know if you would like me to archive them with RAR next time or if uploading to imgur is ok

HWInfo pictures - https://imgur.com/a/bb7PgCP

MEInfo verbose pictures - https://imgur.com/a/IxwgPBU

Bios Pictures - https://imgur.com/a/Irqepf4

Not sure if those are enough pictures of the BIOS for you. The multipliers are still locked and I cannot OC my CPU or touch my RAM timings either.

@sosaa - As requested, please put in a archive, I do appreciate the small image sizes, but I need them all zipped so I can put in folder with your BIOS as I work.
Also, I need to see all of OC Tweaker (you missed bottom), and root of Advanced is missing, so I can see what all submenus you can see in advanced. Boot + Save and Exit missing also

Looks like ME FW is not badly corrupted, but it's still not correct due to your mentioned symptoms, or the BIOS is not etc.
We've seen this before, ME and BIOS looked good, but only flash programmer fixed (ME and or BIOS reflashed never corrected for other users) - One example here

Since you have programmer and I have your dump, I will now fix it with stock BIOS, your NVRAM, unlock FD so you can FPT flash in future, and redo the ME FW. That should fix your current issues (OC, ram etc)
Program this on, then remove all power from the board (ie remove PSU cable from wall or board 24+8pin), then press and hold the case power on switch for 10-15 seconds, then let system sit for one+ minute in this state without any power. This is to reset ME State
Then plug back in, boot to BIOS, load optimal defaults and save/exit, reboot back to BIOS and try some OC settings. This should fix that, then I'll work on BIOS menu for you once I have all the images.
http://s000.tinyupload.com/index.php?fil...318749783487086

@Lost_N_BIOS I have added a more comprehensive list of pictures. Hopefully this is all of them that you needed. I archived them below included in the attachament.

I downloaded that FDME3.00.bin file but I am not exactly sure what to do. Do I add it to my programmer with my bios chip in it then override current BIOS?

@sosaa - sorry, I assumed since you have a programmer, and sent me a programmer dump, that you knew how to use your programmer
Yes, put chip in programmer, erase, blank check, then open BIOS file, write/verify. Then put back into board.

Thanks for images

@Lost_N_BIOS Hey. I finally got around to using the programmer again and I believe I successfully overwrote everything. When I go into my BIOS I am now able to change my core speed to 42(100x) and the number no longer resets back down to 38. I checked HWMonitor and the values are now reading 4.2 as well!

Hello to everyone.
@Lost_N_BIOS i have similar problem, i have I7-3770K and when i try to change the multiplier come back to x39... also i can use only 2 of my 4 bank of ram..
If i go in the System Browser from BIOS or in CPU-Z i can see the 16 GB of ram but in windows and in the Home of the Bios only 8..
Can i flash this file in my Mobo or there are some specific info in the Bios and won't work?
Thanks a lot in advance.
i have attached the response from this command MEInfoWin64.exe -verbose, the fd.bin dumped file and some useful info.

There is also the Bin of my bios
Regards
Stefano

Hello to everyone.
i have a problem similiar to this:t4368f16-Z-Extreme-k-stuck-multipliers-2.htmlsimilar.
I have I7-3770K and when i try to change the multiplier come back to x39... also i can use only 2 of my 4 bank of ram..
If i go in the System Browser from BIOS or in CPU-Z i can see the 16 GB of ram but in windows and in the Home of the Bios only 8..
Can i flash this file in my Mobo or there are some specific info in the Bios and won't work?
Thanks a lot in advance.
i have attached the response from this command MEInfoWin64.exe -verbose, the fd.bin dumped file and some useful info.

Did you know also wich chip for the bios is used (What i need to select in CH341A programmer Tool)?

I have also replied to the other topic but i dosen't have received any rely so i think i need to create a ne topic.
Regards
Stefano

I have the same problem as you, but my card is older a little bit z68 streme 3 gen 3 I'm waiting for someone to help me with bios mod because the last version of my bios is beta I'm at 2.30. my mult crashes at 39

@sosaa - Good to hear you sorted with programmer as well, sorry for the super late reply!

@wes93 @PG HARDWARE - You both need CH341A flash programmer + SOIC8 / SOP8 Test clip with cable. Let me know if you need linked examples at ebay or amazon.

wes93 - only being able to use two memory slots is almost always bent pins in CPU socket, but it's possible you may have voltage issue if trying to use 32GB (raise QPI/Vtt voltage to 1.20-1.25 and see if it still only shows two slots)
If voltage change does not help, remove CPU and show me some images of your socket from side angle views, off to the side, looking down, not straight over the socket. Do this will no flash in a bright room, do not try to zoom in super close to the socket either, that will make bad image.
Please put all images into a max compressed zip - thanks! No need for new topic, merging both of your replies to the other thread now

@Lost_N_BIOS
Hello again!! :)
Thanks a lot for your reply and for have merged my post :)
Yesterday I have flashed the stock bios from the asrock website (2.90 not the beta) with the programmer, CH341A and everything seems ok now:)
Also the Ram and the overclock value!! :)
Thanks a lot again
Stefano

@wes93 - Great to hear you sorted it out yourself already! Is your Ethernet LAN still working OK? This (LAN MAC ID), and sometimes UUID is all Asrock puts in BIOS, so those would be all you possibly need to carry over into the stock BIOS.
Beta is OK to use if you want * edit - Ohh, hey, so this also fixed your 2 missing memory slot issue too? If yes, Great to hear! I've never heard this cause that issue too, but maybe others did not notice it when they had same problem

@Lost_N_BIOS
Thanks again for your reply!! :) I love this forum!! :)
1. Yes, no changes in my MAC address or UUID(Windows 10 remains activates and the MAC is the same, I have the rules in my router referred to the MAC address.)

2. Yes again after I have installed the bios in my mobo everything works again (I doesn’t have touched the RAM or CPU, just unplug the bios flash with CH341A and put back in the mobo)