That is a broken link you gave, if that is the BIOS from post #8 (EVGA BIOS), you cannot flash that with Qflash, you'll have to use flashrom DOS or Linux, or purchase a programmer as I mentioned to you long ago
You'd have it by now if you ordered back then And sorry, I just saw my comment on PLLC32 BIOS chip again, you'll need the USB Nano Programmer I linked for you from ebay (this is not regular CH341A programmer, and no need for SOIC8 test clip since your BIOS is PLLC32)

i've used so far awdflash.exe on a floppy disk, but how can i flash both bios from that way?

You cannot, you need flash programmer to program the backup BIOS physically. Flashrom from DOS may find both chips, if you can get it to work for that board, I've not used it so I don't know how it scans/detects the chips.

Hi Lost_N_BIOS, i managed to flash both bios using flashrom in linux. I am on this bios attached. I put in that oem amd phenom II x4 925 cpu in and it works and is detected. I want to go a little further and put in which is probably an oem phenom II x6 1055t 95w cpu that I also have. Could you have a look at this bios and see if it has support for that phenom II x6 processor or processor(s)?

https://www.bios-mods.com/forum/Thread-P...=20453#pid20453

There is a dropbox link in that post from that forum which is the bios i have flashed on my pc now.

I used that one because it correctly identifies the phenom II X4 i have. Let me know if has phenom II x6 support or if not, can you add support and identification into that specific bios? Thanks in advance.

@Milardo - what is your exact phenom II x6 CPU model so I can look up it's CPUID - sorry, I misread what you motioned, checking for support for phenom II x6 1055t now

I remember this thread, and that EVGA BIOS, at least think it was EVGA, didn't look again right now since I don't know what CPU you need checked about

* edit, the link you gave, dropbox is 404. Please upload the exact BIOS you want me to check out

here it is thanks for replying

Yes, that BIOS has 100FA0 microcode in it from 2/17/2010, so "should" work with phenom II x6 1055t

Couldn't get it to work. Maybe one has to add support for it? Could you take a look at that?

AMD Phenom II X6 1055T 2.8 GHz Six Core CPU Processor HDT55TWFK6DGR AM3 95W is what i have:

https://www.amazon.com/gp/product/B00QWD...0?ie=UTF8&psc=1

Can you also look at this bios-to see if it also has support for the x6?

https://www.bios-mods.com/forum/Thread-P...=24940#pid24940

If the x6 just doesn't work out, maybe I can try this:

https://www.amazon.com/gp/offer-listing/...&condition=used

Only problem I see is that nobody on that forum topic above tried to use a phenom II x4 with turbo like the 960t i posted above.

Hi Lost_N_BIOS,

Couldn't get it to work. Maybe one has to add support for it? Could you take a look at that?

AMD Phenom II X6 1055T 2.8 GHz Six Core CPU Processor HDT55TWFK6DGR AM3 95W is what i have:

https://www.amazon.com/gp/product/B00QWD...0?ie=UTF8&psc=1

Can you also look at this bios-to see if it also has support for the x6?

https://www.bios-mods.com/forum/Thread-P...=24940#pid24940

If the x6 just doesn't work out, maybe I can try this:

https://www.amazon.com/gp/offer-listing/...&condition=used

Only problem I see is that nobody on that forum topic above tried to use a phenom II x4 with turbo like the 960t i posted above.

Please see links in my previous post

Just replying to see i anybody can look at this?

@Milardo - What other CPU do you need checked? I don't want amazon link, give me the model and I will check.
All I can check is if microcode is there, you can do that yourself too with MC Extractor + Find CPU model on CPU-world.com and get it's CPUID then look at MC Extrator microcodes for the BIOS you dropped onto it.
Here is output from both to save you some time (both exact same)

http://www.cpu-world.com/CPUs/K10/AMD-Ph...WFGRBOX%29.html

and

http://www.cpu-world.com/CPUs/K10/AMD-Ph...6ZTWFK4DGR.html

Your answer is in image I showed above, both CPU have same CPUID - 100FA0
That is all I know to check, ucode for that CPUID is there

Thanks for replying, however the x6 processor i have still doesn't work. I think something is missing perhaps. Here is a different gigabyte board that didn't support 6 core phenom ii until it's last bios update. However it supported non turbo phenom II x4 before that last bios it seems. Could you have a look, maybe what they did is what is needed for the x6 processor to work in my board, thanks in advance.

https://www.gigabyte.com/Motherboard/GA-...support-dl-bios

Beta BIOS
Fix onboard VGA compatibility
Update CPU AGESA 3.7.0.0 for AMD 6core CPU

https://www.gigabyte.com/Motherboard/GA-...-10#support-cpu

By the way i have that board as well.

Yes, maybe it's not compatible, as we've known all along. All I can check or change is what I've shown you above and we've discussed.
I know nothing about editing BIOS in regards to what CPU can work or not work etc, other than inserting microcodes which we've already done. Sorry I can't help more than this