@1000 - so confusing, sorry Do you have Sabertooth motherboard? If no, then BIOS in post one or JackSted's signature is for you. NVME Mod + Bifurcation includes unlocked PCI Subsettings (So you can set the bifurcation stuff)

Or, do you need same BIOS mods, but for Sabertooth BIOS? If yes, please zip images of your advanced BIOS page (just main/top view) and within current PCI Subsettings menu too)

Zitat von Lost_N_BIOS im Beitrag #31

---

@1000 - so confusing, sorry Do you have Sabertooth motherboard? If no, then BIOS in post one or JackSted's signature is for you. NVME Mod + Bifurcation includes unlocked PCI Subsettings (So you can set the bifurcation stuff)

Or, do you need same BIOS mods, but for Sabertooth BIOS?

---

http://s000.tinyupload.com/?file_id=00205168610356424330
 

[Offline] JackSted

----------------
@kosh06
The bios I provided does not contain an NVME startup module just the bifurcation options enabled in bios. None is needed if you dont use NVME for windows.
However I made you one with NVME boot. http://s000.tinyupload.com/?file_id=00205168610356424330

If your flashback button does not work I highly recommend getting a hardware BIOS flasher in case of failure to boot, before flashing.
I am curious however how you flashed a modified BIOS without flash back button since the BIOS did not have a valid checksum.
----------------

@1000 - you add too much info in your post, quoted stuff that add to the confusion, so I am still lost. Seems the mod BIOS you requesting is the one you linked??? See what I mean? Tinyupload link you gave is Sabertooth NVME Mod BIOS + Bifurcation changes etc.

Anyway, for my sanity I didn't wait for your reply, here is mod BIOS with updated ucodes, NVME, System Agent switched (For Bifurcation options) + PCI Submenu, hope this is what you wanted.
If this is not, please do not quote any other posts, or discuss other BIOS, tell me exactly what BIOS mods you want done and link the BIOS you want edited from Asus webpage
http://s000.tinyupload.com/index.php?fil...352864341779254

Thanks Lost_N_BIOS on BIOS version, now all options work !

Hello After having solved my bifurcation problem thanks to Lost N Bios and JackSted, I thank you that now I have no more access Raid Marvell controller
The Control + M Button no longer functions as the control + key
Have you ever had this problem?

Sounds like you installed some other incompatible Intel RST update, or bad Marvell update maybe? Did you apply other mods? Marvell is bad enough with a single disk, I couldn't image anyone trying to use it for RAID
If no other mods applied, then make sure you have it all enabled correctly in the BIOS.

Hello, yes the Raid is activated in bios, but I do not access the Raid configuration with Intel key control + I do not work.Is there any other way to configure raid mode with a boot system.No, I have not updated the marvell controller

@kosh06
Exactly, you need Marvell Storage Controller [Enabled], Marvell Storage OPROM [Enabled] and Option ROM Messages [Force BIOS].
Since my motherboard does not have a marvell sata controller I do not know much about these controllers.

By the way, do you have a HDD/SSD raid set with data connected on the Marvell controller. Or do you want a RAID set?
Or are you trying to RAID the NVME with boot? Because I can tell you thats not a possibility. You can however windows raid NON boot NVME drives on X79.
The best way to setup raid on your SATA drives is SATA Mode [RAID Mode] in bios. And then cofigure the RAID set with CTRL+i.
If you cannot access the option rom try to disable fast boot(bios), hibernation and fast startup(windows).

By the way, in testing I have yet to make 4x4x4x4 bifurcation to work properly. In recent testing on the second x16 slot connected to IOU 3 only the first and last NVME slot were functional of my Asus Hyper M.2 x16 Card. However this was tested with only 2 NVME drives installed.

Zitat von kosh06 im Beitrag #35

---

Hello After having solved my bifurcation problem thanks to Lost N Bios and JackSted, I thank you that now I have no more access Raid Marvell controller
The Control + M Button no longer functions as the control + key
Have you ever had this problem?

---

I just tested with the above minipulations but nothing to do.

No access to control + i or control + m.

I searched on the net but not a line on the problem, except a keyboard problem

I already had access to the marvell controller with a card Asus RAIDR Express 240GB Flash SSD Internal Flash PCI-Express, with the CDRom because without it I have never been able to, unfortunately I do not have it anymore.

@kosh06
But the BIOS does show the option rom before BIOS and or prompt for you to press a key? If so the problem is probably that you need to set BIOS > BOOT > USB Support > Full Init, And if that still does not allow you to enter raid setup try a PS/2 keyboard (connect when powered down).
Heres another bios with a smaller NVME ROM to test if davidm71 is correct.
MODDED-SABERTOOTH-X79-4701-small-NVME-IOH+PCIsub.zip

PS.
In order to help and save time please provide details on what drives you want on RAID and what you want to be booting from.
You can also configure iRST for data drives from windows.

I didn't know there was an orom version of the nvme module. Know there isnt so were there any other mods in there? Raid modules mods be my best guess what could max out the orom space.

Flash Back OK, but nothing to do no CRTL + M or I

No bios does not display ROM option

Asus hyper M2 card with SSD samsung 970 evo plus 500 gio x2