@Lost_N_BIOS I agree x2 menus is not clean, but I was trying to save you some time :) Whoever is flashing this just wants the capabilities, I guess looks are not as important, but let's see if you figured it out. I'm testing this now ...

EDIT: No go ... cannot enter BIOS anymore, F2 yields a blank blue screen, didn't like that edit.

Thanks for testing @nimaim - I suspected it wouldn't be that easy
So, what do you think we should do, proceed with the dupes, or work on figuring out settings move from one to another? I know it's possible, I'm just not familiar with how to do it properly, but I'm sure I could figure it out given enough time and testing.

@Lost_N_BIOS I say the dupes are okay ... few reasons:

1) There will be more versions after this I suspect, so easy mods are great because we can do them ourselves with your instructions without too much effort. There are also BIOSes from other vendors for this chassis so lot of different ones to mod and flash and test.
2) Whoever doesn't need those options will just ignore them (and they are easy to spot as they are after the Exit menu).
3) I don't want to take up anymore of your time ... I think what you've unlocked for us is more than enough. There are so many options to test as it is that it will keep people busy for a while.

Is it possible to rename the extra menus so people don't accidentally change settings in them? Something like "Advanced2" "Chipset2" etc. Anything else you would recommend doing? Thanks again.

@nimaim - OK will do a dupes "Semi-final" tonight I did plan to rearrange them, or do you think it's best to leave them after exit?
Unsure about rename, but I think it's possible/easy. I checked one of the other systems BIOS "GK5CN6Z_Mechrevo" and it was basically same as this one, so it's very likely that you can just swap out the modified modules into all the other systems instead of doing separate mods for each.

@Lost_N_BIOS can you check this BIOSes: http://www.cyberpowerinc.com/drivers/?di...Notebook%20BIOS ?

Especially for 109 model (as it is on I'm using :tehe:) and tell if your instructions can help to unlock hidden tabs in those BIOSes

Yes, I will check tonight @truelecter - sorry heading out shortly right now. If it's same kind of system as the rest of these, then I assume it's same, for quick test, swap AMITSE PE32 module with one of the BIOS I posted in post #94
Use Hidremx2L00U.rom Or Hidremx2LFFU.rom (That will give you chipset and second advanced)
Once confirmed it's working on your system, you can use the info I posted to unlock all, or wait until I get that done, then swap out module once I'm finished with the mod.
If it's not same as these Tongfangs, then don't do that swap at all, unless you have programmer and are ready to recover from bricked BIOS.

*Edit - WTH 25MB BIOS download? That's unnecessary insanity! downloading now

* Edit 2 @truelecter - I checked and yes, that method will work similar for your system. Module is not same size, don't swap! It's a little different in yours
Hidden string of just two byte menus is at 00052cf4, other block of full menu ID's (like shown in my image) is at 00055624

Great! Thanks for such quick reply. I will try to modify it tomorrow.

@Lost_N_BIOS If you know how to rearrange them (and Exit to be last), go for it :) Otherwise, it's okay to leave them after Exit. If nothing else, it will give people a clear indication of what was "unlocked" and should be careful with changing.

If rename is too hard, then it's also okay to leave out. That would be nice if we can just swap out modules in these! I will have to test that.

@nimaim - Rename you would have to do a quick test, but I think someone mentioned doing that already as a quick test in this thread early on. I checked and couldn't find it, maybe thinking of another thread.
Yes, I believe rearranging is possible and easy, I included a sample switch test with below rename test. If it's not moved, other methods can be tested next, this was just quick location swap in AMITSE module, if that doesn't do it then move in setup/IFR probably will.
Here is quick test, Advanced2 renamed via AMIBCP and Advanced2/BCP + move Adv2 via AMITSE location swap
http://www.filedropper.com/renameadv-moveadv

You can test ADV2Move first if you want, but if it fails to boot please also test the other so we know if Adv2 rename works, or causes the boot fail, or if only the swap causes it.

After a quick check of AMITSE in few models (I checked Cyberpower above and Mechrevo), I see all are very similar, but each a little different, so they'll all need modified separately.
File swap may work and be functional, but it's sloppy/not ideal since they are all a little different, as a modder I'd prefer doing each one by one and I'm sure owners would rather have that as well.

@truelecter - You're welcome, and good luck! Looks easy, same as this one, if you can't get it let me know.
Also, I added another image and step to to post #99 mod info/method, not necessary for your BIOS in particular, but does help overall for any similar BIOS.

@Lost_N_BIOS

I've been watching this thread for a bit and its been exciting to see your progress with this mod. Is the GK5CN6Z bios the same as GK7CN6S, if not would it be possible for you take a look at it with regards to applying the same method / mod?

GK7CN6S = OP-LP3

Regards,

Zeddi

@Zeddi - thanks, it was a good fight, and happy to say in the end I believe we've won! Please link me to your BIOS and I will check

@Lost_N_BIOS

https://mega.nz/#!Rt11EajB!kpaJPUbYA7oZo...kPwhBHJSZY8RhMM

So fast.This is lastest rom AFAiK

This is for OP-LP3 (TONGFANG GK7CN6S)

Much appreciated,

Zeddi

@Zeddi - you're welcome! Can you modify BIOS, do hex work etc? If yes, then yes, the general method I outlined in post #94+99 is valid for your system too.
Like the CyberPower asked about above, yours is a little different too, short two byte string list of hidden is at 00053074, main list of hidden items starts at 00055af4

If you need it done for you, please wait until we're finished with little more testing (rearranging menu's + renaming) on the other then I will make final for both.

@nimaim - looks like module swaps across the board wont work, this is now 4th one I've checked, and all are a little different, so individual base mods will be needed for all similar models.

@Zeddi, please wait until we figure out what to do with this model. Once we make the proper edits, I can look at it myself following Lost_N_BIOS's instructions.

@Lost_N_BIOS, give me a few hours to test the latest batch. It's unfortunate modules can't just be swapped with these "basically identical" BIOSes but no worries, I think once I do one the process will be very easy. I'm not looking to wear out the pins on my BIOS chip so hopefully we can figure this out soon, otherwise forget the renaming / rearranging ... at that point, it is what it is. I'm sure people will be happy just to have something to play with. Anyway stay tuned for results ...

@nimaim - all these should be fine to flash via FPT, so no need to stress your BIOS pins with programming unless recovery is needed (BIOS Lock always disabled), so you can FPTw -bios -f file.bin
Thanks for continued testing, I think we're nearly done! Unless we come up with more changes, each time we're close we think of something else we forgot previously