It really irks me to have a device with a chip that is designed to be flashable by the user, but it won't flash for some unknown invisible reason. It irks me even more that the flasher says it erased the chip, then wrote the chip, then verified the chip, and yet nothing changed what so ever. Maybe it did flash but the device manager doesn't know how to read the firmware version correctly.

I bought the same card to test it.
Yes it has the Intel firmware. Back then Intel create a firmware themselves modified from the renesas one.
second it has 2 firmware's because it needs another firmware for the front panel and another for the back ports.
U don't need to flash anything.

Interesting stuff. Thanks for the information.

Zitat von SkOrPn im Beitrag #43

---

I did a write using "W201FW21 /srom 0 /log /writeall K2024.mem CFG_201.INI" and that completed without any errors.

Then I did a verify using "W201FW21 /srom 0 /verify K2024.mem" and that said "Verify Mismatch" yet again, as always.

---

W201FW21 /srom 0 /verify K2024.mem cfg.ini
 

If the values inside the cfg.ini are the same that you entered in the writing proces then it should return:

Verify Serial ROM....  100%
Verify complete
 

So yea the thread is old.
But did you ever get this fixed SkOrPn?
Iv got a similare card with uPD720201 on it, and I cannot seem to get good speeds of the rear ports over usb 2.0(havent tried the online connection yet).
Not on your guys level on modding so just got the files here on link below, and it says that the firmware is up to date when flashing 2026. And device manager says 2026 now when changed to the 3.0.23.00 drivers.
Any idea how to get the right speed of the card out in windows 10?

https://www.station-drivers.com/index.ph...&id=437&lang=fr