I just tried a slightly older board and if it recognizes the evo with the adapter and asks me to give it a partition

What partition do I give gpt or mbr?


The other question is:

Because the other board does not recognize it as storage in disk management, if yesterday I tested the two PCI slots, that is, I placed the graphics card on the two PCI ports and they work both I mean, both on the first and second PCI port, then why in disk management after having made the BIOS update does not appear in disk management and not in the BIOS either

Please I need your answers if you would be so kind I appreciate your help too

The first question that I should choose in that option?

The picture is from other mother board old



You have something contact mail or telegram or other to talk to you more and give it datails please

Hey buddy first of all...stop the crying and the please and the so kind... all the mail and "telegrams" on my country are shutdown for vacations, they all went to South America for holidays.

No need to make any partitions for a booting NVMe drive/install Windows.
If "yesterday" the disk appeared in disk management, when testing both PCIe slots and also in the other system board, so its working correctly and the adaptor/NVMe are compatible.

Share a dump of ur SPI current bios here, to verify.
In a windows CMD as ADMIN: FPTw64.exe -d -currentSPI.bin
from ME system tools v8 r3 package: Intel (Converged Security) Management Engine: Drivers, Firmware and Tools

EDIT: I dont need other files, i needed the dump SPI to check if indeed the mod was already flashed and correct in bios.
If the drive already appears, then disconnect the old OS disk 0 and install windows in the NVMe as i already explained in previous posts.

EDIT: TOLD U ALREADY, NO PARTITIONS, leave the drive un-initialized/clean. AND DOESNT MATTER if shows in bios or NOT. THIS IS MOD not OFFICIAL, wot part u dont understand, u told that the drive has to show in bios, read the Fxxxxxxx guide.

No, nothing appears on the 970a ud3p board

Only on the other older plate can he recognize the m2 evo

I will send the file you told me about my original bios

Finally the nmve appears in disk manager as unassigned, on the 970a ud3p board

But what you asked me to do, could you guide me, is that I do not understand that much, I never did the bios dump and it is difficult for me to do it the first time,


I leave you a photo of the plate that already recognizes the nmve and now from here we can continue

The bios mod I used was the second one in this post called:

f44t4086p69207n2_sWApbPrR.zip

Inside was the file:

970AUD3P_NVME.f2n

I formatted the drive but did not assign any letters

Now in the bios if the Nmve appears

I am preparing the iso with rufus in uefi just as you said

We'll see what happens I'll keep telling you

I am preparing usb like this rn uefi as you said:

Of course I already understand you,

Well then I already loaded the usb in uefi as I showed you in the image, now in bios I choose uefi not legacy only uefi, then in boot, I choose the Nmv(pat....)

After I save I exit and key f12 I go to the installation with usb and the nmve should appear

It's right?

IF the mod is ok and flashed in the system, then YES it will show only 1 destination drive, the empty EVO.



EDIT: Oh jesus...leave the damm graphics alone... it has nothing to do with NVMe. Install the damm Windows on the NVMe as UEFI, thats it.
Can u possible explain to me how do wanna run the system if u take out the GPU that is needed in ur current system? Does ur processor has iGPU? Im i dumbass here or wot?

Well I put everything as it should be, but one last thing in a photo that I saw of the bios configuration

You do not see the graphic card in the bios, so should I also remove the graphics card and only do it in the samsung evo adapter?

Because if I remove the graphics card, it won't give video and I won't be able to see anything or what can you tell me about this?

Then I show you the last photo where my graphic appears and tell me if I should remove it or not please

Only that is the last detail that I need to understand

I did but i dont have video without disk hdd set its strange i set all,

I did that


Maybe it will be to change to this other update bios that I am showing because I used the first two and I did not get anything, I do not know if that is recommended

Maybe it is also that it does not appear because when I Opened desktop I choose MBR but do not assign any letter in management disk,
or I do not know what I could have done wrong

Well I retire I have noticed that the evo plus is not fully compatible recognizes it in management disk and other times it does not even appear so I think that the evo plus is not compatible, that I thought since yesterday according to lei because they do not mention this model but if the 970 evo and 970 pro the plus does not support it, and proof of this is my case, that a while I am seen in the pci in management disk and others not, gives proof of my theory, in the same way thank you very much for your help, good day

Thank you, finally this last time and last attempt to install in the samsung evo plus (m2) I wanted to ask you is that the adapter does not have cooling included for the m2, you will have problems
Already what days ago when I was still trying this notice that it heats up a lot, is not necessary some cooling? or I must buy an adapter with cooling included, in the same way I saw in the photos they left on their datators
I hope some answer thanks

Zitat von damiano im Beitrag #69

---

hello, I would like to ask if this bios is flashable with a CH341A programmer. I ask you this because during the update of the official F2g bios I had a voltage drop and now the USB peripherals are no longer read. Sorry for my bad English and thank you for the replies

---