AsRock FM2A75 Pro4-M slipstream winxp32

#1 | AsRock FM2A75 Pro4-M slipstream winxp32 datum

Wed Jun 04, 2014 4:07 pm

Hello, i need drivers for my XP x32 for this motherboard.
Any additional info needed, i will provide it.

Currently im running W8.1x64 pro, but even W7sp1 x32/x64 cant see my hard/ssd drive, regardless if I use sata driver for w7 and load it from USB stick, still w7 cant see and drives.

reply

#2 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Wed Jun 04, 2014 4:18 pm

@ kasko:
Welcome at Win-RAID Forum!

Please check the HardwareIDs of your active on-board SATA Controller by
a) running the Device Manager,
b) opening the "IDE ATA/ATAPI Controllers" and - if applicable - the "Storage Controllers" section,
c) doing a right click onto all listed SATA Controllers and then
d( choosing the options "Properties" > "Details" > "Property" > "HardwareIDs".
Once I know the HardwareIDs, I can tell you, which Win7 resp. XP AHCI or RAID driver you need for the detection of the SATA connectes drives.

Regards
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#3 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Wed Jun 04, 2014 4:24 pm

Zitat von Fernando im Beitrag #2
@ kasko:
Welcome at Win-RAID Forum!

Please check the HardwareIDs of your active on-board SATA Controller by
a) running the Device Manager,
b) opening the "IDE ATA/ATAPI Controllers" and - if applicable - the "Storage Controllers" section,
c) doing a right click onto all listed SATA Controllers and then
d( choosing the options "Properties" > "Details" > "Property" > "HardwareIDs".
Once I know the HardwareIDs, I can tell you, which Win7 resp. XP AHCI or RAID driver you need for the detection of the SATA connectes drives.

Regards
Fernando

PCI\VEN_1022&DEV_7801&SUBSYS_78011849&REV_40
PCI\VEN_1022&DEV_7801&SUBSYS_78011849
PCI\VEN_1022&DEV_7801&CC_010601
PCI\VEN_1022&DEV_7801&CC_0106

Here you go, and many thanks for a really quick reply!

I need (if you can do it) XP sp3 32bit and W7 sp1 x64bit drivers for slipstreaming !

reply

#4 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Wed Jun 04, 2014 5:29 pm (Last edited: Wed Jun 04, 2014 5:29 pm)

@ kasko:
Thanks for the HardwareIDs, which verify, that your system drive is connected with an AMD SATA Controller, which is running in AHCI mode:

Here are the links to the appropriate F6 drivers, which are needed for the XP resp. Windows 7 installation:

for Windows XP (32bit):
>customized 32bit AMD SB7xx/SB8xx AHCI compatible RAID driver v3.3.1540.33<
for Windows 7 (32bit):
>32bit Win7Vista AMD AHCI driver v1.2.1.359 WHQL<

Good luck!

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#5 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Wed Jun 04, 2014 5:39 pm

Thank you, i will try them and report back!

reply

#6 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Wed Jun 04, 2014 7:45 pm

Sorry for double posting.

It worked like a charm with my tinyXp32. Thank you.
Will setup now dualboot or maybe even triple boot with W7sp1_x32 and W8.1x64.

reply

#7 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Wed Jun 04, 2014 7:48 pm (Last edited: Wed Jun 04, 2014 8:31 pm)

Zitat von kasko im Beitrag #6
Will setup now dualboot or maybe even triple boot with W7sp1_x32 and W8.1x64.

Yes, if you install the Operating Systems in the correct order (XP > Win7 > Win8).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#8 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Thu Jun 05, 2014 12:14 am

Zitat von Fernando im Beitrag #7
Zitat von kasko im Beitrag #6
Will setup now dualboot or maybe even triple boot with W7sp1_x32 and W8.1x64.
Yes, if you install the Operating Systems in the correct order (XP > Win7 > Win8).

That was the original idea, dunno if my 120gb ssd will be enough.
I simply love XP, and it is a HECK faster then w8, actually w8 seems slower then XP and W7...

reply

#9 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Thu Jun 05, 2014 10:23 am

Do i have to slipstream sata driver for W7 sp1 32bit because after i load the driver it says that no compatible hardware was found.

reply

#10 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Thu Jun 05, 2014 10:53 am (Last edited: Thu Jun 05, 2014 10:53 am)

Zitat von kasko im Beitrag #9
Do i have to slipstream sata driver for W7 sp1 32bit because after i load the driver it says that no compatible hardware was found.

That is not easy to understand, because the DeviceID of your AMD SATA Controller is listed within the INF file as being supported.
Usually the AMD AHCI Controller should be supported by the Win7 in-box MSAHCI driver as well.
Slipstreaming of the AMD AHCI driver will probably not help, whe the Controller has not been detected by loading the driver at the beginning of the OS installation. Futhermore the driver has to be slipstreamed not only into the install.wim, but into the boot.wim as well.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#11 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Thu Jun 05, 2014 10:55 am

This dvd has integrated sata drivers until May 2014 and all available updates, maybe there is some incompatibility ?

When i click browse for drivers i can see my HDD and SSD drive ?!

reply

#12 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Thu Jun 05, 2014 11:53 am

Zitat von kasko im Beitrag #11
When i click browse for drivers i can see my HDD and SSD drive ?!

You certainly mean "drives" and not "drivers".
So if the Win7 Setup detects your HDD resp. SSD, where you want to get the OS installed, you don't need to integrate or load any third party SATA driver.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#13 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Thu Jun 05, 2014 12:21 pm (Last edited: Thu Jun 05, 2014 12:22 pm)

First i have this
https://www.dropbox.com/s/s4hijd4hdv5ftq...0605_091203.jpg

And after "browse" and selecting your w7 driver i got this:
https://www.dropbox.com/s/6bdii65gdyqln7...0605_091244.jpg

reply

#14 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Thu Jun 05, 2014 8:58 pm

From which drive (Optical drive/USB Flash Drive) are you trying to install Win7?
It seems, that the port, from which you actually are booting, is the problem (USB3 port?).
My tip: Change the port you are using to get Win7 installed.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#15 | RE: AsRock FM2A75 Pro4-M slipstream winxp32 datum

Thu Jun 05, 2014 10:59 pm (Last edited: Thu Jun 05, 2014 11:57 pm)

Oh man, yeah im using USB 3.0 stick along into USB 3.0 port.

Will try to change to usb 2.0 port and report back tonight !

It works like a charm, now i need to setup my stick for w8.1x64 installation and then il have triple boot, MANY THANKS !

reply

Please enter a reason for warning.